Urschel CCX-D User Manual

Urschel® Model CCX-D
Versatile Shredder, Slicer, & Strip Cutter
TYPES OF CUTS
SPECIFICATIONS
Measurements and weights may vary depending on machine conguration.
Length............................58.58" (1488 mm), 24" diam. encl.
.......................................65.33" (1659 mm), 32" diam. encl.
Width ....................................................... 32.95" (837 mm)
Height ..............................32.35" (822 mm), 24" diam. encl.
.........................................33.91" (861 mm), 32" diam. encl.
Net Weight ............................................... 1,000 lb (454 kg)
Motor .........................................5 or 10 HP (3.7 or 7.5 kW)
APPLICATIONS
The Model CCX-D Shredder now offers an optional larger 32 inch (813 mm) diameter cutting zone enclosure. The new, larger enclosure, combined with the 10 horsepower motor promotes a higher capacity and lessens product build-up. The machine is also still available with the original 24 inch (610 mm) diameter cutting zone enclosure. The versatile CCX-D features interchangeable quick locking double ring, single adjustment cutting heads enabling the changeover to different cuts in just minutes. Specially designed knives do not require sharpening, and are inexpensive to replace.
To promote sanitation, the machine features an attached swingaway feed hopper, hinged access panels, sloped surfaces, and highly polished stainless steel. A multitude of cutting heads offer maximum exibility including Flat Slices, “V” Slices, Crinkle Slices, Strip Cuts, Full Shreds, Oval Shreds, “V” Shreds, and Crescent Shreds. Equipped with stainless steel contact parts, the machine features continuous operation for uninterrupted production, and simplied design for easy clean-up and maintenance. The Model CCX-D will accept products measuring up to 3-1/2" (88.9 mm) in any dimension.
Many different types of products can be sliced/shredded using the Model CCX-D for a variety of applications including, but not limited to: shredding cheese for pizza toppings, tacos, or salads; shredding potatoes for hash browns; shredding carrots for salad preparations; and slicing of various fruits and vegetables.
OPERATING PRINCIPLE
Product enters the rotating impeller [ 1 ] and is held against the inner surface of the cutting head assembly by centrifugal force. The cutting head assembly consists of eight individual stationary cutting stations. Slices or shreds are produced as product passes each knife [ 2 ] in a smooth and uninterrupted manner. Length is controlled by input product size.
1
2
MODEL CCX-D
Not all components in the cuts listed below may be avail-
able in stainless steel Ra 32 polished nish.
NEW!
NEW!
FULL SHREDS & REDUCED V SHREDS
Full Shred: Diamond-shaped cross section
available in three thicknesses: .070, .097, .125, or .285" (1.8, 2.5, 3.2, or 7.2 mm).
Reduced V Shred: “V”-shaped cross section
OVAL SHREDS
Oval Shred: Oval-shaped cross section
approximately .125" (3.2 mm) thick by .250" (6.4 mm) wide. Wide Oval Shred: measures .125" (3.2 mm) thick by .375" (9.5 mm) wide.
CRESCENT SHREDS
Crescent Shred: Crescent-shaped
cross section. Wide Crescent Shred: Wide crescent-shaped cross section
FLAT SLICES
Slice thickness up to .500" (12.7 mm)
FULL & REDUCED Flat-V™ SHREDS
Full Flat-V Shred: Hexagonal-shaped cross
section measuring approximately .150” (3.8 mm) on all sides. Reduced Flat-V Shred: Flattened top and bottom that form a corrugated shred.
Flat-V™ SLICE
Slice thickness up to .180” (4.6 mm)
(measured across ats, not angled anks) with
2.1 corrugations per inch. The depth of each corrugation is .125” (3.2 mm). Centers: .473” (12 mm).
STRIP CUTS
Rectangular cross section. Widths: 3/32, 1/8, 3/16, 1/4, 3/8, 1/2, 9/16, and 3/4" (2.4, 3.2, 4.8, 6.4, 9.5, 12.7, 14.3, and 19 mm)
V SLICES
Slice thickness up to .100" (2.5 mm)
.125" Slice: 8 complete “V’s” per inch.
The depth of each “V” is .050" (1.3 mm); Centers: .125" (3.2 mm). .212" Slice: 4.7 “V’s” per inch. The depth of each “V” is .084" (2.1 mm); Centers: .212" (5.4 mm).
STANDARD CRINKLE SLICE
Slice thickness up to .285" (7.2 mm) with 3-1/2 waves per inch. The depth of each crinkle is .080" (2 mm). Centers: .300" (7.6 mm).
GRATING OPTIONS
Grating Heads offer cuts including powdered parmesan, coarse granules, and a variety of shreds.
(over)
Urschel® Model CCX-D Dimensional Drawings
NEMA 4/IP66
S.S. ELECTRICAL
ENCLOSURE
24" Diameter
Enclosure
NEMA 4/IP66
S.S. ELECTRICAL
ENCLOSURE
32" Diameter
Enclosure
The Model CCX-D (both 24" and 32" diameter enclosures) are available with an optional caster frame. Dimensions will vary depending on customer requirements. Contact your local Urschel representative for additional information.
You Are Invited to Test Cut Your Product
Urschel Laboratories has a complete network of test facilities and experienced service and sales representatives around the world ready to work for you on any size reduction application. Con­tact your local Urschel Laboratories’ representative to schedule a comprehensive, no-obligation test today at www.urschel.com.
® Urschel is a registered trademark of Urschel Laboratories, Inc. | ™ Flat-V trademark pending. | L2556 September 2013 (s.s. L2349)
Loading...