Urschel CC-DL User Manual

Urschel® Model CC-DL
High Capacity Shredder, Slicer, & Strip Cutter
TYPES OF CUTS
Grating Options: Grating Heads offer cuts including powdered parme­san, coarse granules, and a variety of shreds.
FULL SHREDS & REDUCED V SHREDS
Full Shred: Diamond-shaped cross section
available in three thicknesses: .070, .097, .125, or .285" (1.8, 2.5, 3.2, or 7.2 mm).
Reduced V Shred: “V”-shaped cross section
OVAL SHREDS
Oval Shred: Oval-shaped cross section
SPECIFICATIONS
Measurements and weights may vary depending on machine conguration.
Length .....................62.40" (1585 mm)
Width .......................35.59" (904 mm)
Height ......................33.93" (862 mm)
Net Weight .................... 700 lb (318 kg)
Motor ........................10 HP (7.5 kW)
The Model CC-DL is accepted by the U.S.D.A, Dairy Division.
APPLICATIONS
Many different types of products can be sliced/shredded using the Model CC-DL for a variety of applications including, but not limited to: shredding cheese for pizza toppings, tacos, or salads; shredding potatoes for hash browns, shredding carrots for salad preparations, and slicing of various fruits and vegetables.
OPERATING PRINCIPLE
Product enters the rotating impeller [ 1 ] and is held against the inner surface of the cutting head assembly by centrifugal force. The cutting head assembly consists of eight individual stationary cutting stations. Slices or shreds are produced as product passes each knife [ 2 ] in a smooth and uninterrupted manner. Length is controlled by input product size.
1
2
NEW!
NEW!
approximately .125" (3.2 mm) thick by .250" (6.4 mm) wide. Wide Oval Shred: measures .125" (3.2 mm) thick by .375" (9.5 mm) wide.
CRESCENT SHREDS
Crescent Shred: Crescent-shaped
cross section. Wide Crescent Shred: Wide crescent-shaped cross section
FULL & REDUCED Flat-V™ SHREDS
Full Flat-V Shred: Hexagonal-shaped cross
section measuring approximately .150" (3.8 mm) on all sides. Reduced Flat-V Shred: Flattened top and bottom that form a corrugated shred.
STRIP CUTS
Rectangular cross section. Widths: 3/32, 1/8, 3/16, 1/4, 3/8, 1/2, 9/16, and 3/4" (2.4, 3.2, 4.8, 6.4, 9.5, 12.7, 14.3, and 19 mm)
FLAT SLICES
Slice thickness up to .500" (12.7 mm)
V SLICES
Slice thickness up to .100" (2.5 mm)
.125" Slice: 8 complete “V’s” per inch.
The depth of each “V” is .050" (1.3 mm); Centers: .125" (3.2 mm). .212" Slice: 4.7 “V’s” per inch. The depth of each “V” is .084" (2.1 mm); Centers: .212" (5.4 mm).
STANDARD CRINKLE SLICE
Slice thickness up to .285" (7.2 mm) with 3-1/2 waves per inch. The depth of each crinkle is .080" (2 mm). Centers: .300" (7.6 mm).
Flat-V™ SLICE
Slice thickness up to .180" (4.6 mm)
(measured across ats, not angled anks) with
2.1 corrugations per inch. The depth of each corrugation is .125" (3.2 mm). Centers: .473" (12 mm).
MODEL CC-DL
(over)
Urschel® Model CC-DL Dimensional Drawings
You Are Invited to Test Cut Your Product
Urschel Laboratories has a complete network of test facilities and experienced service and sales representatives around the world ready to work for you on any size reduction application. Con­tact your local Urschel Laboratories’ representative to schedule a comprehensive, no-obligation test today at www.urschel.com.
® Urschel is a registered trademark of Urschel Laboratories, Inc. | ™ Flat-V trademark pending. | L2540 August 2013 (s.s. L2460)
Loading...