Urschel 3660 User Manual

Comitrol® Processor Slant Models 3640, 3660 & 3675

Controlled Particle Size Reduction

2

3

1

Comitrol® Processor
Model 3640 Slant

SPECIFICATIONS

Comitrol® Processor Model 3640 Slant:

Length: .....................51.30" (1303 mm)

Width: ...................... 40.98" (1041 mm)

Height: .....................62.43" (1586 mm)

Net Weight: ................... 1196 lb (542 kg)

Motor: ............... Impeller - 40 HP (29.8 kW)

Comitrol® Processor Model 3660 Slant:

Length: .....................59.36" (1508 mm)

Width: ...................... 42.88" (1089 mm)

Height: .....................62.43" (1586 mm)

Net Weight: ................... 1400 lb (636 kg)

Motor: ............... Impeller - 60 HP (44.8 kW)

Comitrol® Processor Model 3675 Slant:

Length: .....................63.54" (1614 mm)

Width: ...................... 42.88" (1089 mm)

Height: .....................62.43" (1586 mm)

Net Weight: ................... 1500 lb (681 kg)

Motor: ............... Impeller - 75 HP (56.0 kW)

APPLICATIONS

The compact size of the Comitrol Processor Slant Models 3640, 3660,
and 3675 makes each machine ideal for a wide range of small volume to
high capacity production environments. Each model varies in dimension,
weight, and horsepower.

Processors benet from the wide selection of cutting heads and

impellers that are available for diverse applications such as chopping,

ake cutting, granulating, pureeing, and emulsifying.

Foods such as meats, poultry, fruits, vegetables, and cheeses can be
processed as well as many chemical and pharmaceutical products. The
machine features continuous operation for uninterrupted production,
and is designed for easy cleanup and maintenance.

OPERATING PRINCIPLE

Product is guided to the high speed, rotating impeller [ 1 ]. When
product reaches the impeller, it revolves at a high speed inside the
cutting head. Centrifugal force propels the product outward past the
cutting edges of the stationary reduction head. The cutting head
has uniformly spaced thin horizontal bars, or separators [ 2 ]. Small
portions of product projecting into the spaces between the separators

are cut off into akes by spaced columns of vertical knives [ 3 ]. These
akes quickly travel outward and away from the cutting head. The wall

surfaces between the vertical knives are relieved to eliminate rubbing
friction that would produce heat.

TYPES OF CUTS

Particle sizes ranging from coarse to ne emulsions are possible. To

ensure the proper combination of cutting parts, Urschel Laboratories,
Inc. recommends your product be tested in one of our worldwide Product

Test Cutting Facilities free-of-charge to nd the most efcient solution to

your size reduction needs.

If your product application is not mentioned on this page, contact your local Urschel representative to
determine the most effective solution to your size reduction needs.

(over)

Comitrol® Processor Slant Models 3640-3675 Dimensional Drawing

You Are Invited to Test Cut Your Product

Urschel Laboratories has a complete network of test facilities and
experienced service and sales representatives around the world
ready to work for you on any size reduction application. Con­tact your local Urschel Laboratories’ representative to schedule
a comprehensive, no-obligation test today at www.urschel.com.

®Comitrol and Urschel are registered trademarks of Urschel Laboratories, Inc.
L2596 DECs 2013 (s.s. L2189)

®

www.urschel.com | [e-mail]