Urschel 3000 Specifications
Comitrol® Processor Model 3000
LABORATORIESLABORATORIES
INCORPORATED
LABORATORIESLABORATORIES
INCORPORATED
Controlled Particle Size Reduction
utting
C
Head
COMITROL® PROCESSOR MODEL 3000
OPERATING PRINCIPLE
SPECIFICATIONS
Length: . . . . . . . . . . . . . . . . . . . . . . 51.69" (1313 mm)
Width: . . . . . . . . . . . . . . . . . . . . . . . . 32.92" (836 mm)
Height: . . . . . . . . . . . . . . . . . . . . . . *71.75" (1822 mm)
Net Weight: . . . . . . . . . . . . . . . . . . . . 1100 lb (499 kg)
Motor: . . . . . . 15, 30, or 40 HP (11.2, 22.4, or 30 kW)
APPLICATIONS
Product is guided to the high speed, rotating impeller. When product reaches the impeller, it revolves at a high speed inside the cutting
head. Centrifugal force propels the product outward past the cutting
edges of the stationary reduction head. Small portions of product projecting into the spaces between the separators are cut off into flakes
by spaced columns of vertical knives. These flakes fly outward and
away from the cutting head. The wall surfaces between the vertical
knives are relieved to eliminate rubbing friction that would produce
heat.
roduct
P
Impeller
The Comitrol Processor Model 3000 is ideally suited for milling
products with a high moisture content such as whole kernel sweet
corn, cooked meats, and vegetables.
Processors can choose from a variety of cutting heads and impellers
to produce the desired finished particle size. The two piece enclosure
simplifies disassembly, cleaning and care of the cutting parts.
http://www
E-mail:
.urschel.com
info@urschel.com
Horizontal
Separators
Vertical
Impeller
CUTTING HEAD ASSEMBLY
Knives
TYPES OF CUTS
Particle sizes ranging from coarse to fine emulsions are possible. To
ensure the proper combination of cutting parts, Urschel Laboratories, Inc.
recommends your product be tested in one of our worldwide Product Test
Cutting Facilities free-of-charge to find the most efficient solution to your
size reduction needs.
*USUAL HEIGHT WITH 40 H.P. MOTOR IS SHOWN. THIS HEIGHT WILL
Y DEPENDING ON HORSEPOWER AND MOT
AR
V
CONSULT URSCHEL LABORATORIES, INC. TO DETERMINE SPECIFIC
HEIGHT.
OR MANUFACTURER.
®Comitrol and Urschel are registered trademarks of Urschel Laboratories, Inc.
L2073 SEP 2006 (s.s. L1535)
If your product application is not mentioned on this page, contact your local Urschel representative to
determine the most effective solution to your size reduction needs.
Loading...