Urschel 1500 Specifications

Comitrol® Processor Model 1500
Controlled Particle Size Reduction
Impeller
SPECIFICATIONS
Length: . . . . . . . . . . . . . . . . . . . . . . 51.42" (1306 mm)
Width: . . . . . . . . . . . . . . . . . . . . . . . . 33.31" (846 mm)
Height: . . . . . . . . . . . . . . . . . . . . . . *72.13" (1832 mm)
Net Weight: . . . . . . . . . . . . . . . . . . . . 1100 lb (499 kg)
Motor: . . . . . . 15, 30, or 40 HP (11.2, 22.4, or 30 kW)
APPLICATIONS
The Comitrol® Processor Model 1500 is specifically designed for
The Model 1500 is equipped with the microcut cutting head and corresponding impeller to process a variety of products including fruit nectars, soy beans, tomato catsup, barbecue sauce, vegetable purees, beverage concentrates, and creams and ointments. The machine features continuo us operation fo r uninterrupted production , and simplified design for easy cleanup and maintenance.
Product
Microcut
Head
COMITROL® PROCESSOR MODEL 1500
OPERATING PRINCIPLE
Product is guided to the center of a high speed, rotating impeller. Centrifugal force moves product outward to the impeller tips, which carry the product past the cutting edges of the stationary microcut head.
The microcut head is a ring of closely spaced blades. Product strikes the exposed cutting edges of the blades with great velocity. This action results in the removal of small particles until reduction is completed. Particles are discharged through the spaces between the blades. Because of high impeller speeds, product remains in the microcut head only a fraction of a second. The product is reduced in precise increments, emerging a uniform size.
Blades
Product
Impeller
TYPES OF CUTS
Particle sizes ranging from coarse to fine emulsions are possible. To ensure the proper combination of cutting parts, Urschel Laboratories, Inc. recommends your product be tested in one of our worldwide Product Test Facilities free-of-charge to find the most efficient solution to your size
*USUAL HEIGHT WITH 40 H.P. MOTOR IS SHOWN. THIS HEIGHT WILL VARY DEPENDING ON HORSEPOWER AND MOTOR MANUFACTURER. CONSULT URSCHEL LABORATORIES, INC. TO DETERMINE SPECIFIC HEIGHT.
If your product application is not mentioned on this page, contact your local Urschel representative to determine the most effective solution to your size reduction needs.
®Comitrol and Urschel are registered trademarks of Urschel Laboratories, Inc.
reduction needs.
MICROCUT HEAD ASSEMBLY
Loading...