Please read the following user manual carefully to keep from injuries.
About Storage And Maintenance
Do not try to disassemble or repair the phone.
Avoid
wet and damp places.
Do not use harmful detergent or harmful chemical materials to wash the
phone.
Instead, use soft cloth to rub its appearance.
not inflict strong shock on the appliance.
Do
The appliance shall be situated near the electronic switch for hands to
easily when the battery is charged. Do not put the phone in high
reach
temperature
The warranty on this phone will be invalid if it is repaired by an
unauthorized
breakdown
Never extract the battery from the phone while turned on, which will cause
defects
Contact the agency you joined if the phone or its parts (charger, battery,
and
environment, which may cause defects on the phone.
person. And its maker does not take responsibility for the
caused afterward.
on
the phone.
so
on) malfunction.
7
Page 8
For Safe Operation
Menu
1
. Phone Book
2
. Calls
3
. Messages
4
. Movistar
5
. Service
6
. Multimedia
7
. Entertainment
8
. Tools
9
. Settings
Measurement Of Radio Frequency
Exposed (Absorbed Special Rate
Information SAR)
This phone is a communication appliance with low-output electric wave.
Complying with EU standard requirements related with radio wavelength
exposure,
the phone has not been designed and made exceeding the
energy exposure limit of the radio frequency as recommended by European
Union board of directors. The limit specified above is a frequency allowable in
general as a world standard.
World standard value was developed, based on thorough and regular
researches and estimation (examination) by an independence
scientific
research
institution. The limit is a standard to search for safety of all,
regardless
of
Standard value of the phone exposure is displayed in unit of Specific
absorption
8
age or present state of health.
index (SAR).
Page 9
For Safe Operation
Communication Network Service
The mobile conforms to communication standard laws of GSM850,
DCS1800, PCS1900 and GPRS.
Read this user manual thoroughly to understand and learn the functions of
appliance.
this
Customers should know that the Tri-Band (850-1800-1900) is a feature
coming
Make sure that this feature is available via the RED exchange service
personnel.
Additional RED services are available for this phone.
For these services, however, customers are required to join the exchange
service.
For further information on How To Join, see below.
from the communication network.
Safety On The Road
Please remember that using a mobile phone during driving is prohibited.
Follow the rules as applicable in each country.
Stop the car in a safe place if you need to answer or use the phone.
always remember the following before using the phone in
Please
emergencies.
Focus on driving only.
Remember the most considerable thing is nothing but your safety.
If you want to use a Hands-Free device on vehicles, let it installed by an
authorized
engineer.
9
Page 10
For Safe Operation
Safety In Hospital
The mobile phone since designed to transmit electric waves can disturb
functions
of
Remember to turn the phone off always in hospital.
electric or medical appliances.
Safety In Flight
Remember the phone if used in the airplane can disturb functions of electric
wave
equipment of the airplane.
Therefore, the use of the phone is illegal in the airplane.
Remember
to
turn the phone off always during flight.
Safety In Places Where Explosion Is
Predictable
In such places as gas stations or chemical factories where explosion is
predictable,
Turn
the use of any electric wave equipment is illegal and prohibited.
off the phone and avoid the use near any gas station.
10
Page 11
For Safe Operation
Electrical Equipment
Most electric appliances are secured and protected against the effect of the
phone radio frequency.
Nevertheless, there are some products that are not protected against. A
person who works in a manufacturing company of those products,
wearing heart pulsimeter is desired to keep at least 15cm away from the
to
avoid the electric wave.
phone
If applicable problems still occur as before to the person with heart
pulsimeter,
The phone can disturb functions of some kind of microphones.
In this case, please contact the manufacturing factory of such microphones
for
further information.
Since the radio frequency signal generated from this phone may have an
on
influence
be
well informed thereof via its maker.
then the phone shall be turned off.
electric equipment of a car (air bag, brake, and so on), please
11
Page 12
For Safe Operation
Battery And Parts
This phone uses a rechargeable battery of Li-ion Technology.
The battery if completely recharged is usable to call for a duration of 120
minutes and available for standing-by for a duration of 180 hours.
not use any charger or battery if damaged or worn out.
Do
Do not touch any circuit of the battery. It will cause damage thereon.
If the battery is kept in hot temperature, its function and duration may be
deteriorated.
Keep temperature always as similar as possible.
The phone if kept in too high or too low temperature may not operate from
time
Time required to recharge the battery may be different according to several
factors
For the better performance of recharge, keep suitable temperature.
The battery although completely recharged can be discharged of itself as
the
Unplug the charger if not used.
For effective operation of the phone, please stand the phone always
lengthwise.
Do not throw the battery in a ditch or a fire.
The battery shall be recycled according to its related laws.
Use only the battery, charger and parts attached to the phone just as
provided
Parts shall be compatible to be used.
If
If some parts need replacement, contact the agency you joined to order.
Fill
For pluggable equipment, the socket-outlet shall be installed near the
equipment
12
to
time even if the battery completely recharged.
such as capacity left, type of battery and charger, and so on.
time elapses.
not, its warranty will be invalid.
up
from the factory.
the battery to the maximum prior to its first operation.
and shall be easily accessible.
Page 13
Inside The Package
USB Cable
Earphone
Handset
User Manual
Battery
Travel Charger
13
Page 14
Main Menu/OK Key
Earjack & Charger &
14
Left Selection Key
Send Key
MIC
USB Cable port
Handset Description
Earpiece
LCD Screen
Navigation Key
Right Selection Key
END / Power Key
Alphabet / Number Key
microSD Card
Camera Lens
Page 15
Cellular Phone
In The Beginning
Installment of SIM Card
To answer or make a call, the mobile needs a available SIM card, which the
communication
Note:
1
. Remove the battery and cover as shown in the following figure.
company may have installed already.
If the mobile is used, installation state of the SIM card will be displayed.
If the SIM card is not installed, a confirmation paragraph will be displayed.
Warning
Do not remove the battery with turning on the mobile. (Turn off the mobile
before
removing the battery)
15
Page 16
Cellular Phone
2
. After the battery is removed, insert the SIM card as shown in the
following
figure.
3
. After inserting the SIM card, insert the battery and cover.
Note:
- Keep pressing the lower of the cover till it sounds Tic.
- Follow these procedures or some defects may occur on the support parts of
the entrance, which will not be guaranteed.
16
Page 17
Cellular Phone
Charging Battery
1
. Insert the charger as shown in the figure. The screen will display the
Battery
seconds
even during the battery is charged). If the phone is turned off, display of
Battery is being charged will be continuously displayed.
2
. If the charging is completed, display will show the charging completed
status.
is
being charged while the phone is turned on for several
before returning to the previous step. (your phone is available
To
remove the charger, hold and full the both ends to extract.
Warning
Do not connect the Charger(or such accessories) up side down. It can be
to
possible
damage the Phone.
17
Page 18
Cellular Phone
Using the Micro SD Card
Installing the Micro SD Card
1
. Open the card hole cover , and insert the Micro SD card like the arrow
indicates.
(Remove the back cover and battery)
Removing the Micro SD Card
1
. To remove the Micro SD card, follow the arrow indicates.
18
Page 19
Cellular Phone
• When you insert Micro SD card, make sure contact terminals face down.
• Memory used for the mobile phone is not the general SD card but the
Micro SD cards.
• “Micro SD” card is recognized as a mobile disk when connected to a
personal
• When disconnecting from PC, please remove the USB storage
equipment on your PC. Otherwise, the stored files on the Micro SD card
could be damaged.
Removable Memory Storage Functionality
The Phone Guarantee only less 1G bytes Memory Card.
computer.
19
Page 20
Cellular Phone
Phone ON/OFF
Keep on pressing the End Key for 5 seconds to turn on the phone.
This function is designed to avoid unintentional ON or OFF of the phone
kept in a pocket or luggage.
when
Start
If PIN enable setting on after the phone is turned on, you will be required
input 4-digit password. Input correct password and press OK
to
(Center_Direction)
Key.
Note:
If password is not input, only emergency call will be available with SOS
Key.
In case the phone has been off for long, you may be asked to make sure if
date
and time are correct.
If they are not correct, press edit Key.
If the date is correct, press OK(Center_Direction) Key.
If the date is not correct, input new date using the number on the Key
and then if the time is not correct, input new time and then press
pad
OK(Center_Direction)
Key. Select daylight saving on or off.
20
Page 21
Cellular Phone
Stand-by Screen
For about few seconds after the phone is on, it’s image and menu
may
be
environmental setting of the menu. And the menu will not be displayed
during
this duration. After this duration, the speed will be back to normal.
Stand-by
make
a
displayed a little slower than usual. This delayed time is for
screen is displayed when the phone is available to answer or
call.
• Upper part: The Main service indicators will be display on top of the
• Lower part: On the bottom, ‘Msgs’ menu will be displayed as a
Main
screen. On the lower side, day, month, year and
present time will be displayed.
Left_selection Key. ‘mcontenidos’ menu will be displayed
a
Right_selection Key.
as
21
Page 22
Cellular Phone
• Press the Left_selection Key in stand-by screen to display the
Messages menu.
• Press the Right_selection Key in stand-by screen to display the
mcontenidos
• Press the Upper of the direction Key in stand-by screen to
display the movistar menu.
• Press the Lower of the direction Key in stand-by screen to search the
contact
• Press the Left of the direction Key in stand-by screen to display the
Multimedia menu.
• Press the Right of the direction Key in stand-by screen to display the
New Message menu.
• Press the Center of the direction Key in stand-by screen to display the
Main menu.
menu.
lists in the phonebook.
22
Page 23
Cellular Phone
The direction Key will be used mainly to appropriate functions of the phone.
• Keep on pressing End Key in stand-by screen state to turn off the phone.
• When the screen is in a normal state, press Send Key to display the call
record.
• In order to make a call, press number first in stand-by screen state and
the call Key next. Keep on pressing one number among 2 and 9 and a
to
the number as input will be made. In the following table, various
call
functions are described as applicable when number keys are pressed for
short or long in stand-by screen state.
23
Page 24
Cellular Phone
Short
1
No.1
Call connected to voicemail box
2
No.2
Speed Dial
3
No.3
Speed Dial
4
No.4
Speed Dial
5
No.5
Speed Dial
6
No.6
Speed Dial
7
No.7
Speed Dial
8
No.8
Speed Dial
9
No.9
Speed Dial
0
No.0
Symbol +
*
Symbol* Silent Mode On/Off
#
Symbol# Keypad Lock/Unlock
24
Long
Page 25
Icon
Cellular Phone
Name
Antenna Always displayed to show service area if reached.
Service
available level
Service available
level A
Bell mode There are 5 bell modes available (Ring, Vibration
New SMS This will be displayed when a new SMS
Roaming state Displayed while user is in other service area or
Missed Calls Displayes information about the recently missed
GPRS
Always displayed to show service available level
(0 to 4) in a bar graph.
The greatest service available level with the
maximum bars.
Only, Vibra and Ring, Vibra then Ring, Light Only)
on the menu and Silent mode on Idle screen.
Mute Ringer volume is set to off.
message is received.
Phone Lock
Battery Displayed approximately to show
the actual capacity of the battery state
Alarm
Ear Jack A headset is connected.
receiving a call abroad.
calls.
Displayed GPRS network is within range and can
be
used.
Description
Phone is locked.
Displayed if alarm is set via the calendar.
25
Page 26
Cellular Phone
Calls
Making a Call
To make a call, press desired phone number in stand-by screen state and
then
number
behind
finish
the
following screen.
If the inputted phone number is displayed, just press option(Left_selection)
Key
to
• Save Contact
• Messages
• Attach Number
• Insert Pause
If SIM card or the memory of the phone is displayed automatically, specify
a related type of the phone too. (Refer to the user manual for more detailed
procedures.)
Answering a Call
Press Call (receive) Key to answer the phone call.
Press
26
Call Key . If you input wrong number, Clear Key to delete the last
input. In order to delete a specific number, move the cursor right
the number to delete and then press Clear Key. Press End Key to
the call. In the stand-by state of the phone, input number to display
use such options.
End Key not to answer the phone call.
Page 27
Cellular Phone
Whole Menus
In the stand-by state, press the menu(Center_Direction) key to go to
standard menu. Press the direction(up/down/left/right) Key to get into menu
and then pressing the OK(Center_Direction) Key or press relevant
desired,
number
to
get into the category applicable. Figures of the icons, names of
the
categories, brief description of each menu and short-cut keys are as in
the
following table;
Icon Menu
Phone Book To save phone numbers and setting speed dial,
Calls To look through call record and voice messages sent
Messages To read and write messages.
movistar To use STK menu.
Service To move to Service menu.
Multimedia To deal with camera and image album, videos, MP3,
Entertainment
Tools To use calendar, alarm, calculator, unit converter,
Settings To specify volume, calling melody, background image
owner, extra number.
and received.
Radio, etc.
FM
To
download and select new video games
and melody images. and Health.
stopwatch, world clock.
and other environment of the phone.
Description
27
Page 28
Cellular Phone
Common Screens And System In Various
Menus
Input Phone Number
When you start inputting number in stand-by state, the number will be
moving from right to left as it is inputted. If the number input
displayed,
reaches
the end of the right, the number will move to the lower line to
prepare
a
space for the next numbers to input.
During inputting number, the screen will be as shown below.
In order to insert a number between numbers just entered, use the direction
Key (up/down/left/right) to move the cursor.
Press Clear Key to delete the number on the left of the cursor.
Writer
Writer is used to input phone number, text or number.
All kinds of writers (phone number, number, text) have their own functions
respectively.
Writer of Phone Number
It is used to input phone number from the phonebook. Above all, press
number
0 ~ 9 are available to enter, which has the following features.
28
in
stand-by screen state to get into the screen of writer function.
Page 29
Cellular Phone
• Press <*> and <#> to input characters of <*> and <#> respectively.
• Press Clear Key to delete the last number input. Keep on pressing Clear
Key to delete the whole number input (whole number) and to return to
stand-by screen state.
• Press OK(Center_Direction) Key to go to next step. Press Back Key to
go back to the previous step of the screen.
Writer of Number
It is used to input password 1, password 2 and call-restricted password.
the following keys to make use of its functions specified.
Press
• Use the keys 0 to 9 to press such number 0 to 9 as applicable.
• <*> and <#> Key has no function.
• Press Clear Key to delete the last number input. Keep on pressing Clear
Key to delete the whole number input.
• Press OK(Center_Direction) Key to go to next screen.
Press Back(Right_selection) Key to go back to the previous screen.
Writer of Text
It is used to input text of names or messages. There are 3 input methods
text writer.
for
• [ABC] Capital English letter input
Displays all the input text in capital letters. This can be used
together
described.
• [abc] Small English letter input
Displays all the input text in small letters. This can be used
together
• [Abc] Capital & Small English letter input
Displays all the input text in Capital & small letters. This can be
used
with Multi Input and Smart Input which will be later
with Multi Input and Smart Input.
together with Multi Input and Smart Input.
29
Page 30
Cellular Phone
• [123] Number Input
Note:
Number input is available fast. (Press number 0 to 9 to display 0
to 9 as applicable.
Press <*> shortly to change input sequence as follows; abc, Abc, ABC, 123
and Long press <*> to eZiEN, eZien, eZiEn, eZiES, eZies, eZiEs.
Smart Input
This makes fast text input available. With the improved technology of (Press
and
prepared
expected
30
Expect), a function to expect is realized, making use of the dictionary
in
the language specified. In this way the writer provides the serial
characters of text when the user presses the Key once.
• [eZiEN] The Capital English e-Zi letter input
For example, to write a letter ‘HELLO’, just press numeric key
4(GHI), 3(DEF), 5(JKL), 5(JKL) and 6(MNO).
• [eZien] The Small English e-Zi letter input
For example, to write a letter ‘hello’, the method is same as
but it will display the small English Character.
eZiEN,
• [eZiEn] The Capital & Small English e-Zi letter input
For example, to write a letter ‘Hello’, the method is same as
but it will display the Capital & small English Character.
eZiEN,
• [eZiES] The Capital Spanish e-Zi letter input
For example, to write a letter ‘Hola’, just press numeric key
4(GHI), 6(MNO), 5(JKL) 2(ABC).
Page 31
Cellular Phone
• [eZies] The Small Spanish e-Zi letter input
For example, to write a letter ‘hola’, the method is same as
but it will display the small Spanish Character.
eZiES,
• [eZiEs] The Capital & Small Spanish e-Zi letter input
For example, to write a letter ‘ Hola’ , the method is same as
eZiES,
Note:
combination
but it will display the Capital & small Spanish Character.
Press Down-Navi key shortly to find other words which has same
key stroke.
Text Selector
Press 0 Key shortly in the screen of text mode to display text selector which
can
Move
those special characters.
If you select the special character.
Press OK(Center_Direction) Key to input applicable character.
Characters
display special characters which are not available in general text mode.
the direction Key (up/down/left/right) on the text desired to select
available are as follows;
Note:
Press <#> shortly to input a Space on text editor.
31
Page 32
1. Phone Book
In Phonebook, phone number, name and other information are saved and
displayed.
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Phone Book menu then press
OK(Center_Direction) Key.
Option list related with Phone Book menus will be displayed as shown
below;
• Quick Search
• Search Contacts
• New Contact
• Groups
• Speed Dial
• Owner Number
• Extra Number
• Management
32
Page 33
1. Phone Book
There are two points of contact in address book.
1
. To SIM: Information related with contact is saved in SIM memory only.
2
. To Phone: Information is saved in phone memory only.
A special icon represents each contact.
In this way , duplicate contact uses SIM contact uses SIM card-shaped
,
and the next icon
icon
The followings are several rules used in address book.
• As specified, address book displays whole address book on the screen to
show all contacts.
• Group will be represented by a special icon.
• Contact lists in the phonebook are displayed in alphabetic order. Phone
number correspondent to each name is marked on the right of the line
under the screen.
• Up to 30-character and 40-digit input can be saved in the phone book. (If
the first text input is some symbol to represent international call, up to
41 is available)
• Up to 4 phone number items are available for a name.
• Up to 250 addresses can be saved in SIM memory. (The number of
available differs from each other according to card capacity)
addresses
• Up to 300 entries can be saved in phone memory.
• If all the information of a name can not be displayed at a time on screen,
press
the direction Key to move the information vertically to display and
read the rest on screen (being accordingly changed) to the end.
is
used for phone contact.
33
Page 34
1. Phone Book
Quick Search
In this menu which you can find the Phone number quickly which has stored in
the Phone or SIM.
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Phone Book menu then press OK
(Center_Direction)
3
. On Phone Book screen, select Quick Search and press OK
(Center_Direction)
4
. On the Bottom, input characters up to 5 to find the contact name.
34
Key.
to
display the following information.
Page 35
1. Phone Book
Select Quick Search and press Option(Left_selection) Key to display its
as
follows;
options
• See Details: Shows details on contact being selected.
- Name (it appears on the upper of the screen)
- Number
- Home Number
- Company Name
- Email Address
- Office Number
- Fax Number
- Birthday
- Associate Picture
- Associate Video
- Associate Sound
- Caller Group
• Edit: Change the information of the name selected.
• Delete: Delete contact.
• Copy To SIM/Copy To Phone: Copy to SIM or Phone memory.
• Move To SIM/Move To Phone: Move to SIM or Phone memory.
• Duplicate: Duplicate contact.
• Send SMS: Send the SMS to selected phone number.
• Send MMS: Send the MMS to selected phone number.
• Send vCard: Send vCard.
35
Page 36
1. Phone Book
Search Contacts
Searches a Contact as written.
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Phone Book menu then press OK
(Center_Direction)
3
. On Phone Book screen, select Search Contacts and press OK
(Center_Direction)
This menu is used to search for other contacts on the contact list.
Select
Search menu to display Search by name screen.
On the screen write characters up to 10 to find the contact name.
If written, the applicable name with the same characters is displayed.
Now
you may search up and down to find the name on the list.
For example, press No2 3 times Key to fast reach names with the first
of C.
character
If there is no name with such a character, the Key will show names with
next character (in alphabetical order).
the
36
Key.
to
display the following information.
Page 37
1. Phone Book
New Contact
Add new Contact to SIM or Phone.
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Phone Book menu then press OK
(Center_Direction)
3
. On Phone Book screen, select New Contact menu and press OK
(Center_Direction)
This menu adds new contact to address book. To store the new contact,
the
storage should be selected first as following.
• To SIM: Input name and number then press OK(Left_selection) Key.
Select yes to save contact in SIM memory.
Key.
to
display the following information.
37
Page 38
1. Phone Book
• To Phone: Input name, number, home number, company name, email
address, office number, fax number, birthday, associate
picture,associate video, associate sound and caller group
press Done(Right_selec tion) Key. Select yes to save
then
contact in Phone memory.
38
Page 39
1. Phone Book
Groups
By using the Caller Group, you can easily distribute a contact into Group.
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Phone Book menu then press OK
(Center_Direction)
3
. On Phone Book screen, select Groups and press OK
(Center_Direction)
Caller Group Details
Select group press OK(Center_Direction) to display its options as follows;
Key.
to
display the following information.
39
Page 40
1. Phone Book
Rename Group
It is used to change selected group name. Select group name on Caller
Group
Rename
name.
Associate Group Ringer
It is used to change select group ringer. Select ringer on Caller Group
Details screen. Use Left/Right direction Key to select group ringer.
Associate Group Picture
It is used to change select group picture. Select picture on Caller Group
Details
View(Left_selection)
group picture.
Group Color Pattern
It is used to change select group color pattern. Select Color Pattern on Caller
Group Details screen. Use Left/Right direction Key to select None or Color
pattern 1~6.
Associate Group video
It is used to change select associate video. Select Video on Caller Group
Details screen. Use Left/Right direction key to select None, From File.
Add Member
It is used to add member in group. Select Member List on Caller Group
Details screen. Press OK or option(Left_selection) Key and select Add.
Select contact and press Add(Left_selection) then select Yes(Left_selection)
to finish.
Details screen and press Edit(Left_Direction) Key to display Write
group screen. Use alphabet/number buttons to change to new
Press OK(Center_Direction) Key then select done to finish.
screen. Use Left/Right direction Key to select group picture or press
Key then use Upper/Lower direction Key to select
40
Page 41
1. Phone Book
Speed Dial
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Phone Book menu then press OK
(Center_Direction)
3
. On Phone Book screen, select Speed Dial and press OK
(Center_Direction)
Key.
to
display the following information.
4
. Select Enable Speed Dial on speed Dial screen to turn on/off
Speed Dial.
If this option is enabled, you can use a fast call. Select number and then
press
available
it to
make a fast call thereto in stand-by state. How to make it
is as
follows;
41
Page 42
1. Phone Book
Setting Speed Dial Number
In the mobile, individual phone number can be set to each number Key of 2
to 9. For example, if you want to set Key No.7 for certain fast dial number,
the
procedures below shall be followed.
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Phone Book menu then press OK
(Center_Direction)
3
. On Phonebook screen, select Speed Dial and press OK
(Center_Direction)
4
. Select enable Speed Dial to enable.
5
. Select Set Number and press OK(Center_Direction) Key to go into speed
setup window.
dial
Key.
to
display the Speed dial menu.
th
6
42
. Select 7
slot and press Option(Left_selection) Key then select Edit.
Page 43
1. Phone Book
7
. Select any contact number you want to connect with Key No.7 and press
OK(Center_Direction) Key.
8
. Press option(Left_selection) Key and select Edit or Delete if you want to
Edit or Delete the fast call connection.
If the fast dial number is presently activated, keep pressing Key No.7 till the
call
connects.
43
Page 44
1. Phone Book
Owner Number
The number of owner number can vary (up to 4) depending on the SIM.
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Phone Book menu then press
OK(Center_Direction) Key.
3
. On Phone Book screen, select Owner Number and press OK
(Center_Direction)
4
. Press option(Left_selection) Key and select Edit or Erase.
• Edit: Edit an Owner Number.
• Erase: Deletes an Owner Number.
44
to
display the following information.
Page 45
1. Phone Book
Extra Number
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Phone Book menu then press OK
(Center_Direction)
3
. On Phone Book screen, select Extra Number and press OK
(Center_Direction)
The following is to describe the option.
• Service Dial Number: The list of numbers in the SDN (Service Dial
• SOS Number: The list of numbers in the SOS Number. Select SOS
Key.
to
display the following information.
appears. Select service Numbers then
Number)
Number
press Call Key.
then press Call Key.
45
Page 46
1. Phone Book
Management
In Management menu, you can easily change the Storage or Copy and
Delete and several other functions.
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Phone Book menu then press OK
(Center_Direction)
3
. On Phone Book screen, select Management and press OK
(Center_Direction)
The following is to describe the option.
• Memory Status: Used to confirm the capacity and the condition of SIM
• Preferred Storage: Select SIM or Phone.
• Copy All: Copy all from SIM to Phone or Phone to SIM.
• Delete All: Delete all from SIM, Phone or One By One.
• Fields: Setting Contact fields.
• My vCard: Edit and Send My vCard.
46
Key.
to
display the following information.
card or phone memory.
Page 47
2. Calls
Through this Calls menu, you can move to call Logs and mainly used number
list.
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Calls menu then press OK
(Center_Direction)
Key.
Option list related with Calls menus will be displayed as shown below;
• All Calls
• Missed
• Received
• Sent
• Settings
• Call Time
• Call Cost
• SMS Counter
• GPRS Counter
• Delete Call Log
47
Page 48
2. Calls
All Calls
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Calls menu then press OK
(Center_Direction)
3
. On calls screen, select All Calls and press OK(Left_selection) Key to
display
Select a call log and press OK(Left_selection) Key to display call information in
detail.
48
Key.
the following information.
Page 49
Press option(Left_selection) key to display call info menu with the following
options;
• Delete: Deletes a selected phone number.
• Save: Save selected phone number to the Phonebook.
• Call: Tries a call to the selected phone number.
• Edit: Edit phone number.
• Send SMS: Send the SMS to selected phone number.
• Send MMS: Send the MMS to selected phone number.
Missed
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Calls menu then press OK
(Center_Direction)
3
. On calls screen, select Missed and press OK(Left_selection) Key to
display
Key.
the following information.
2. Calls
49
Page 50
Select a call log and press OK(Left_selection) key to display call information in
detail.
Press option(Left_selection) Key to display call info menu with the following
options;
• Delete: Deletes a selected phone number in Missed folder.
• Save: Save selected phone number to the Phonebook.
• Call: Tries a call to the selected phone number.
• Edit: Edit phone number.
• Send SMS: Send the SMS to selected phone number.
• Send MMS: Send the MMS to selected phone number.
50
2. Calls
Page 51
2. Calls
Received
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Calls menu then press OK
(Center_Direction)
3
. On calls screen, select Received and press OK(Left_selection) Key to
display
Key.
the following information.
Select a call log and press OK(Left_selection) Key to display call information in
detail.
51
Page 52
Press option(Left_selection) Key to display call info menu with the following
options;
• Delete: Deletes a selected phone number in Received folder.
• Save: Save selected phone number to the Phonebook.
• Call: Tries a call to the selected phone number.
• Edit: Edit phone number.
• Send SMS: Send the SMS to selected phone number.
• Send MMS: Send the MMS to selected phone number.
Sent
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Calls menu then press OK
(Center_Direction)
3
. On calls screen, select Sent and press OK(Left_selection) Key to display
the
following information.
52
Key.
2. Calls
Page 53
2. Calls
Select a call log and press OK(Left_selection) to display call information in
detail.
Press option(Left_selection) Key to display call Info menu with the following
options;
• Delete: Deletes a selected phone number in Dialed folder.
• Save: Save selected phone number to the Phonebook.
• Call: Tries a call to the selected phone number.
• Edit: Edit phone number.
• Send SMS: Send the SMS to selected phone number.
• Send MMS: Send the MMS to selected phone number.
53
Page 54
Settings
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Calls menu then press OK
(Center_Direction)
3
. On calls screen, select Settings and press OK(Left_selection) Key to
display
Key.
the following information.
The following is to describe the option.
• Caller ID
• Call Waiting
• Call Forwarding
• Call Restriction
• Call Time Reminder
• Automatic Redial
• Answer Mode
54
2. Calls
Page 55
2. Calls
Caller ID
This service is used to make to display the Caller’s ID(number or Name)
when sending a call.
• Set By Network: Send or Hide by Network.
• Hide ID: Do not send a caller’s ID to Network
• Send ID: Send a caller’s ID to Network
Call Waiting
This service is used to make other call to stand by while a first call is
connected,
which can be applied or cancelled as necessary.
• Activate: Activates Call Waiting option.
• Deactivate: Deactivates Call Waiting option.
• Check Status: Check the status of Call Waiting option.
Call Forwarding
It allows you to make received Call to go to other phone number.
Select this option and press OK(Center_Direction) Key to use this function,
which
has sub-menus as follows;
• Divert All Voice Calls: Forwards all voice call.
• Divert If Unreachable: Forwards all calls in no service area.
• Divert If No Answer: Forwards all calls in absence, the mode will
• Divert If Busy: Forwards all calls during connected with other phone.
• Divert All Data Calls: Forwards all data calls.
• Cancel All Divert: Deactivates all Call Forwarding.
activate
if
call is not answered.
55
Page 56
Call Restriction
This service makes a calls to be sent and received only under the specified
conditions.
• Outgoing Calls:
- All Outgoing: Restricts all outgoing calls, which is controlled by
- International Outgoing: Restricts all outgoing calls to abroad, which is
- International Except Home: Restricts calls to foreign countries or
• Incoming Calls:
- All Incoming: Restricts all incoming calls which is controlled by
- When Roaming: Restricts a call when in a Roaming state.
• Cancel All: Cancel all the pre-set restricts, which is controlled by
• Change Password: In order to change password for call Restriction,
Select following option menu to make use of this service.
password.
controlled by password.
regions, but to allow calls to your home
password.
password.
country.
select change password option and press
OK(Center_Direction) Key then input the correct
password first and then new password
existing
twice(it is to confirm that the new password is
correct).
Call Time Reminder
• Off
• Single: You can easily set the single alert time. (1~3000Sec.)
• Periodic: You can easily set the periodic alert time. (30~60Sec.)
56
2. Calls
Page 57
Automatic Redial
If this function is selected, dialing will repeats automatically if the
connection
the
phone will try to make a call to the number again automatically.
If you do not want to use this function, press Off(Left_selection) Key, or
OK(Center Direction) Key to select Off.(toggle key)
press
Answer Mode
• Any Key Answer: Starts a Call connection when any key on the
• Auto: This option will be visible when a Earpiece has connected. If it
has failed since in absence or not answered. In 5 seconds,
has pressed.
keypad
every incoming call will connect automatically in 3 sec.
activates
2. Calls
57
Page 58
Call Time
This menu informs a calling time which has been Sent or Received.
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Calls menu then press OK
(Center_Direction)
3
. On calls screen, select Call Time and press OK(Center_Direction) to
display
The following is to describe the option.
• Last Call Time: Used call time for the last call.
• Total Sent: Used total call time for all sent calls.
• Total Received: Used total call time for all received calls.
• Reset All Time: Reset all call time.
58
Key.
the following information.
2. Calls
Page 59
2. Calls
Call Cost
This menu informs a cost of called which has been Sent or Received.
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Calls menu then press OK
(Center_Direction)
3
. On calls screen, select Call Cost and press OK(Center_Direction) to
display
Key.
the following information.
The following is to describe the option.
• Last Call Cost: Informs a call cost of last call.
• Total Cost: Informs a call cost of total call.
• Reset Cost: Reset all call cost.
• Max Cost: Fix a limitation of call cost. It can not be use if the call cost
• Price Per Unit: Fix a price per unit of call cost.
Note:
has
reached the limitation.
The Call Cost menu will be shown if the SIM supports.
59
Page 60
SMS Counter
This menu informs a quantity of SMS which has been Sent or Received.
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select calls menu then press OK
(Center_Direction)
3
. On calls screen, select SMS Counter and press OK(Center_Direction) to
display
The following is to describe the option.
• Sent: Shows the quantity of SMS which has been sent by the phone.
• Received: Shows the quantity of SMS which has been received by the
60
Key.
the following information.
phone.
2. Calls
Page 61
2. Calls
GPRS Counter
This menu informs amount of GPRS which has been Sent, Received or
Downloaded in MMS or WAP service.
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select calls menu then press OK
(Center_Direction)
3
. On calls screen, select GPRS Counter and press OK(Center_Direction)
to display the following information.
Key.
The following is to describe the option.
• Last Sent: Shows the size of the last data packet sent by the phone.
• Last Received: Shows the size of the last data packet received by the
• All Sent: Shows the size of the total data packet which have been sent
• All Received: Shows the size of the total data packet which have been
• Reset Counter: Reset all GPRS Counter Informations.
phone.
by the phone.
received by the phone.
61
Page 62
Delete Call Log
This option is used for you to erase all the call lists through call option
menu.
(Missed, Received, Dialed, All).
It will erase all the record of calls with ease.
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Calls menu then press OK
(Center_Direction)
3
. On calls screen, select Delete Call Log and press OK(Center_Direction)
Key
to
display the following information.
The following is to describe the option.
• Missed: Deletes all absence calls saved.
• Sent: Deletes all sent calls saved.
• Received: Deletes all received calls saved.
• Delete All: Deletes all the lists of calls saved.
62
Key.
2. Calls
Page 63
3. Messages
This function allows you to create, send, read and save a message using
the
Short Message Service (SMS: text messages), Multimedia Message
Service
(MMS: messages supporting presentation of various media types,
such
as
full color images and polyphonic ring tones) provided by your
operator. Voice mails are also available.
network
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Messages menu and then press OK
(Center_Direction)
Key.
Option list related with Message menus will be displayed as shown below;
• Messages
• Chat
• Voice Mail Server
• Broadcast Message
63
Page 64
3. Messages
Messages
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Messages menu then press OK
(Center_Direction)
3
. On Messages screen, Select Message and press OK
(Center_Direction)
Send New SMS
1
. On New screen, Select Text Message and press OK(Center_Direction)
Key
to
2
. Input message.
3
. Press option(Left_selection) Key.
64
Key.
Key to display the following information.
display the following information.
Page 65
3. Messages
The following is to describe the option.
• Done
- Save and Send: Save message then send message.
- Send Only: Send message.
- Save To <Drafts>: Save the message then draft message.
- Send To Many: Send message to many people.
- Send By Group: Send message to group.
• Use Template: Insert a clause stored in Template.
• Insert Object: Allows user to insert some object in a message.
• Format Text
- Text Size: Select Small, Medium or Large.
- Text Style: Select On or Off for Bold, Italics, Underline and
- Alignment: Set alignment among Automatic, Left, Center and Right.
- New Paragraph: Starts new Paragraph with among Automatic, Left,
• Insert PHB Number: Can input the number from Phonebook to SMS
• Insert PHB Name: Can input the name from Phonebook to SMS editor.
For example, picture (simple static picture), animation
(small moving picture), melody (music), sound
(simple bell).
Strikethrough.
Center
Send New MMS
1
. On New screen, Select Multimedia Message and press OK
(Center_Direction)
• To: Where main receiver’ s phone number or E-mail addresses Will be
Key to display the following information.
specified.
Up to 60
numbers for the phone number.
and Right.
editor.
characters are available for E-mail and up to 40
65
Page 66
• Cc: Where other receiver s contact will be displayed to receive copy of
message. How to select receivers is as described previously.
You may input several phone numbers or E-mail addresses to
send a message to many receivers at a time through address book
screen.
• Bcc: The Bcc option has same function as CC. Only difference is that
• Subject: Where title of message will be displayed. Select this option
• Edit Content: Where details of message are written. Press Edit
numbers or E-mail addresses can not be seen for receiver.
phone
and
press Edit(Left_selection) Key to go to Subject screen
described previously to input up to 40 characters.
(Left_selection) Key to go to Subject screen described
- Add text:
- Add Image: It is used to attach picture or image already saved in the
- Add Audio: It is used to add desired sound to MMS. (You may
- Add Video: It is used to add desired Video to MMS. (You may
- Add Attachment: It is used to add desired Attachment to MMS.
- Add Slide Before: Adds a new slide in rear of current page.
- Add Slide After: Adds a new slide in front of current page.
- Add Bookmark Text: Input the bookmarked URL.
- Preview: Displays the appearance of the present messages page.
- Slide Timing: Set the time duration that the received messages
previously to input up to 1024 characters.
phone.
select the sound saved in the phone or the sound being
recorded to the phone using the microphone.)
select the Video saved in the phone or the Video being
recorded to the phone using the video recorder.)
displayed.
It
automatically scrolls to the next slide after
the specified time.
66
3. Messages
Page 67
3. Messages
2
. Press Done(Right_selection) Key to display the following information.
• Send Only: Send a message without saving.
• Save and Send: Save then send a message.
• Save to <Drafts>: Saves the written multimedia message to Drafts
• Send Options
- Validity period: Maximum period can be specified as necessary to
- Delivery report: If this function is executed, the message sender will
- Read report: If this option is executed, you can be sure if its receiver
- Priority: Displays priority of multimedia messages sent.
• Exit: Exit from MMS menu. It may ask you to save a message before
exiting.
folder.
make message sent. If once the period is over, the
message will be automatically deleted. 1 Hour,
12 Hours, 1 Day , 1 Week and the maximum are
for the period. The maximum has been pre-
available
viously established by its service provider. However,
the minimum is 1 hour as described above.
have information on message transfer from MMS
service center, through which the message sender
can
be
sure if the message has been read by the
receiver or still saved in MMS service center.
This information includes the receivers phone
number,
message details, present state
(if transferred or kept in MMS service center),
transfer time and date.
has read the message or not. Once the receiver read
the message, the time and date when the message was
will be sent to its sender. No option is
read
available for this function. It lets you be sure if the
message
has been read by the receiver or not.
(Normal, High, Low)
The saved message will be stored in Drafts folder
67
Page 68
3. Messages
Received Messages
In Received, all the received SMS will be stored. It can be stored up to 100
If a message is received, separately specified sound of bell will operate.
as
shown below, an image will be displayed on the screen.
And
View Saved Message Not Read Yet
Follow the procedures below to read new message saved.
a. Read Text Message: Select text message option to display text
• This icon means that the message in the Inbox is not read yet.
• This icon means that the message in the Inbox is read already.
message
list, received. Each message has an
icon
and sender’s number, date. There are two
kinds
of
icons;
68
Page 69
3. Messages
‘Received’ of SMS
Select a SMS to read now and press option(Left_selection) Key.
• View: Viewing all information related with the message.
• Reply: Displays Write Text Screen to replay to the message received.
Write message as desired. If you want to know how to write and
send text message (SMS), refer to <Send New SMS>.
• Forward: Delivers the received message to others. Input the phone
number
directly thereon or select a receiver on PhoneBook.
press OK(Center_Direction) Key.
Then
• Edit: Edit the message.
• Delete: Delete the SMS a message.
• Delete All: Deletes all messages.
• Use Number: Use Numbers which contained in a Message.
• Use URL: Use URL which contained in a Message.
• Chat: Start Chatting.
• Advanced
- Copy to SIM/Phone: Copy the Selected Message to Phone or SIM.
- Move to SIM/Phone: Move the Selected Message to Phone or SIM.
- Copy All text Messages: Copies all the Selected Message.
- Move All Text Messages: Moves all the Selected Message.
69
Page 70
3. Messages
‘Received’ of MMS
Select MMS to read and press option(Left_selection) Key to display various
option
menus.
• View: Viewing all information related with the message.
• Reply: Reply the MMS Message to Sender’s number.
• Reply to all: Reply the MMS Message to Sender’s and CC, BCC
• Forward: Forwards the Message to others receiver.
• Edit: Edits all information related with the message.
• Delete: Delete draft message.
• Delete All: Delete all draft messages.
• Properties: Shows the message information as it appears on the
• Use Detail: Use Numbers or Email address which contained in a
Sent Message
‘Sent’ stores messages that you have sent.
‘Sent’ of SMS
Select a SMS to read now and press option(Left_selection) Key.
• View: View the message.
• Forward: Delivers the sent message to others.
• Edit: Edits all information related with the message.
• Delete: Delete a message.
• Delete All: Delete all messages.
• Use Number: Use dial or save to phonebook.
• Use URL: Use URL which is in a Message.
• Advanced
- Copy to SIM/Phone: Copy the Selected Message to Phone or SIM.
- Move to SIM/Phone: Move the Selected Message to Phone or SIM.
70
number.
recipient’s
Message.
phone.
Page 71
3. Messages
- Copy All text Messages: Copies all the Selected Message.
- Move All Text Messages: Moves all the Selected Message.
‘Sent’ of MMS
Select a MMS to read now and press option(Left_selection) Key.
Unsent Messages
‘Unsent’ stores messages that you have failed to send, or canceled.
‘Unsent’ of SMS
Select a SMS to read now and press option(Left_selection) Key.
• View: Viewing all information related with the message.
• Send: Send draft message.
• Edit: Edits message and the receiver number.
• Delete: Delete draft message.
• Delete All: Delete all draft messages.
• Properties: Shows the message information as it appears on the
• Save Object: Save object which is attached in Message.
• Use Detail: Use Numbers or Email address which contained in a
recipient’
Message
s
phone.
• View: View the message.
• Send: Send a message.
• Edit: Edits all information related with the message.
• Delete: Delete a message.
• Delete All: Delete all messages.
• Use Number: Use Numbers which contained in a Message.
• Use URL: Use URL which contained in a Message.
• Advanced:
- Copy to SIM/Phone: Copy the Selected Message to Phone or SIM.
- Move to SIM/Phone: Move the Selected Message to Phone or SIM.
71
Page 72
- Copy All Text Messages: Copies all the Selected Message.
- Move All Text Messages: Moves all the Selected Message.
‘Unsent’ of MMS
Select a MMS to read now and press option(Left_selection) Key.
• View: Viewing all information related with the message.
• Send: Send a message.
• Edit: Edits all information related with the message.
• Delete: Delete draft message.
• Delete All: Delete all draft messages.
• Properties: Shows the message information as it appears on the
• Save Object: Save object which is attached in Message.
• Use Detail: Use Numbers or Email address which contained in a
Drafts Messages
‘Drafts’ store messages which is saved for holding or keeping.
‘Drafts’ of SMS
Select a SMS to read now and press option(Left_selection) Key.
• View: View the message.
• Send: Send draft message.
• Edit: Edits message and receiver’s number.
• Delete: Delete draft message.
• Delete All: Delete all draft messages.
• Use Number: Use Numbers which contained in a Message.
• Use URL: Use URL which is in a Message.
72
recipient’s
Message.
phone.
3. Messages
Page 73
3. Messages
• Advanced:
- Copy to SIM/Phone: Copy the Selected Message to Phone or SIM.
- Move to SIM/Phone: Move the Selected Message to Phone or SIM.
- Copy All Text Messages: Copies all the Selected Message.
- Move All Text Messages: Moves all the Selected Message.
‘Drafts’ of MMS
Select a MMS to read now and press option(Left_selection) Key.
• View: View the message.
• Send: Send draft message.
• Edit: Edits all information related with To, Cc, Bcc, Subject or Edit
• Delete: Delete draft message.
• Delete All: Delete all draft messages.
• Properties: Shows the message information as it appears on the
• Use Details: Use Numbers or Email address which contained in a
Delete Folder
Deletes all Messages from selected folder or Delete all folder at once.
• Received
• Unsent
• Sent
• Drafts
• Delete All Folders
content.
recipient’s
Message.
phone.
73
Page 74
3. Messages
Templates for SMS
Select a pre-written Template above the list. You can easily edit the
prewritten
Select a Template menu and press Option(Left_selection) Key.
• Edit: Edits Template message.
• Erase: Erase Template message.
• Erase All: Erase all Template messages.
• Write Message: Write Template message.
Templates for MMS
Select a Template menu and press Option(Left_selection) Key.
• View: View the message.
- View: View the message.
- Save Object: Save object to phone or Memory card.
• Properties: Shows a properties.
• Write Message: Writes a new MMS template.
SMS Message Settings
• Profile Setting: In Profile setting, you can change the Name of profile,
• Common Setting: Can enable or disable Delivery report and Request
• Memory Status: It shows the memory status of SIM and Phone about
• Preferred Storage: You can select the Storage for current saving point.
• Add new word: You can add new word for user dictionary.
74
templates as you need.
number
of
type.
Reply.
the SMS message.
Select SIM of Phone.
SMS Center, Valid period and message
Page 75
3. Messages
MMS Message Settings
It is used to define a options for MMS. The options displayed on screen are
as
shown below;
• Sending
- Validity period: Maximum period can be specified as necessary to
- Delivery report: When this option is set to On, the network informs
- Read report: When this option set to On, receiver’ s phone sends a
- Priority: Select Low, Normal or High.
- Slide Timing: Displays the play time in second during the attached
- Delivery time: Select In one hour, In 12 hours, In 24 hours or
• Retrieval
- Home network: Select Delayed, Immediate, Restricted or User
- Roaming: Select As Home, Delayed, Restricted or
- Read Report: Select On request, Send or Never Send.
- Deliver Report: Select On or Off.
message sent. If once the period is over, the
make
message will be automatically deleted.
1 Hour, 12 Hours, 1 Day , 1 Week and the maximum
available for the period.
are
The maximum has been previously established by
its service provider .
you whether or not your message has been
delivered successfully.
reply to let you know when your message was read
by her/him.
file
is
played.(Up to 99 seconds available.) Input 1
to 99.
Immediate.
Confirmation.
User Confirmation.
75
Page 76
• Filters
- Anonymous: Whether Allow or Reject Unknown Message.
- Advertisement: Whether Allow or Reject advertisement Message.
• Edit Profile: Select Profile1 ~10 to edit.
• Compose
- Creation Mode: Select Free or Restricted.
- Image Resizing: Select 160X120, 320X240 or Off.
- Auto Signature: Select On or Off.
- Text: Input Text.
• Memory Status: This function displays the amount of used and
available memory on your phone.
76
3. Messages
Page 77
3. Messages
Chat
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Messages menu then press OK
(Center_Direction) Key.
3
. On Messages screen, Select Chat and press OK(Center_Direction) Key
to
display the following information.
4
. Select Chat Room 1 or Chat Room 2 and press Option(Left_selection)
Key.
5
. Select Chat Room Info. Set nickname and remote number then press
OK(Center_Direction) Key.
6
. Select Start New and send message.
77
Page 78
3. Messages
Voice Mail Server
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Messages menu then press OK
(Center_Direction)
3
. On Messages screen, Select Voice Mail Server and press OK
(Center_Direction)
4
. Press option(Left_selection) Key.
Connect to Voice
Connect to Voice mail server.
78
Key.
Key to display the following information.
Page 79
3. Messages
Broadcast Message
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Messages menu then press OK
(Center_Direction)
3
. On Messages screen, Select Broadcast Message and press OK
(Center_Direction)
The following is to describe the option.
• Reception: Allows you to receive Broadcast messages if this option is
• CB List: Shows CB messages recently received, not saved nor deleted
• Languages: Check On or Off the desirable Language.
Key.
Key to display the following information.
selected. (Default is set to Off)
this screen. If there is no message, List is empty will be
on
displayed.
If there is any message, its related title will be shown.
Press details Key for further information. To save the message
press Yes(Left_selection) Key, and press No(Right_selec tion)
Key to delete.
79
Page 80
• Channel: Defines a channel to receive Broadcast messages.
Select a new channel from the list to display on screen and
use option Key to execute. If you want to add a new
channel to list, press option Key and then Add. Input new
channel number to number writer and press OK
(Center_Direction) Key (Up to 3-digit number is available and
the number shall be surely input. If not, channel setting will
not be available). The Write option of sub-menu edits name
and number assigned to the selected channel on the list.
Note:
Up to 10 channels are available.
The Broadcast message menu will be shown if the SIM supports.
80
3. Messages
Page 81
Movistar
1
. Use function of SIM Tool Kit.
2
. The menu can be used if the SIM supports.
4. Movistar
81
Page 82
5. Service
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Service menu then press OK
(Center_Direction)
Key.
Option list related with Service menus will be displayed as shown below;
• mcontenidos
• Data Account
82
Page 83
5. Service
mcontenidos
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Service menu then press OK
(Center_Direction)
3
. On Service screen, Select mcontenidos and press OK(Center_Direction)
Key
to
Key.
display the following information.
The following is to describe the option.
• Home Page: Goes to home page directly.
• Bookmarks: This provides easy website access without inputting a
• Recent Pages: To Allows the user to goto the URL, which you recently
• Go to URL: Input the desired URL.
• Settings
URL again.
connected.
- Edit Profile: Select the Profile 1~10 and edit.
- Browser Options
- Timeout: The Timeout is disconnection time when there are no
- Show Images: The Show Image is the choice of viewing an
response
image
in
GPRS connection. Input 15~300.
in
WAP connection. Select On or Off.
83
Page 84
- Service Message: Select On or Off.
- Clear Cache: Select Yes(Left_selection) Key to clear cache.
- Clear Cookies: Select Yes(Left_selection) Key to clear Cookies.
- Connect Confirmation: Select On or Off.
- Trusted Certificates: Shows certification.
Data Account
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Service menu then press OK
(Center_Direction)
3
. On Service screen, Select Data Account and press OK
(Center_Direction)
Key.
Key to display the following information.
The following is to describe the option.
• GSM Data: Displays environmental setting of GSM connection and
• GPRS: Helps to change the address of APN or communication network.
specifies number to call, type of terminal (analog or digital),
and
inactive duration till the service is available.
84
5. Service
Page 85
6. Multimedia
1
. In stand-by state, press OK(Center_Direction) Key to display main menu
option.
2
. Use the direction Key to select Multimedia menus icon and then press
OK(Center_Direction) Key. The icons are as shown below;
Option list related with Multimedia menus will be displayed as shown below;
• Camera
• MP3 Player
• Images
• Videocamera
• Videos
• Photo Editor
• Sound Recorder
85
Page 86
6. Multimedia
Camera
1
. In stand-by state, press OK(Center_Direction) Key to display main
menu option.
2
. Use the direction Key to select Multimedia menu then press OK
(Center_Direction)
3
. On Multimedia screen, Select Camera and press OK(Center_Direction)
Key
The following is to describe the option.
• From Menu: On the menu screen,select multimedia then select camera.
• Hot Key: Keep pressing and hold the upper side volume key in stand-by
You can adjustment camera options by using numeric key.
86
Key.
to
display the following information.
Press OK(Center_Direc ti on) again. If the camera operates
anyway, let the phone stand lengthwise with its number pad
downward, then catch hold of an object to take a picture of
using the direction Key (ensure that camera
controller is located at the rear central upper of the phone)
and press OK(Center_Direction) in the center to take a
picture.
screen.
Page 87
6. Multimedia
Note:
- Wait a few seconds for the digital sensor to adjust to digital tone of
color when starting camera operation, which will make the quality of
images excellent.
- Sound similar to the shutter of a camera will be heard for you to feel the
same
as
with the actual camera when the moment a picture is taken.
Camera Options
The camera built-in the mobile includes functions of digital zooming and
adjustment. If the camera starts to operate, the following icon will be