U-Reach IT Professional Series User manual
HDD
Duplicator
IT Professional Series
1-3, 1-7, 1-15
V2.1
User Guide
the Expert of Duplicators
www.ureach-inc.com
Content Index
Basic Introduction
1
1. Overview 3
2. Features 3
3. Product Overview 4
A. System Overview
B. LCD Configuration
C. SATA Module
D. HDD Holder
E How to assemble SATA module
F. IDE Module
Function Table
2
Function Table 7
Function Introduction
3
1. Copy 8
2. Compare 8
3. Copy & Compare 8
4. Erase 9
4-1 Quick Erase 9
4-2 Full Erase 9
4-3 DoD Erase 9
4-4 DoD Erase Comp 10
5. Utility 10
5-1 Show HDD Info. 10
5-2 Update System 11
5-3 System Info. 11
6. Setup 12
6-1 Copy Area 12
6-1-1 System and Files
6-1-2 All Partition
6-1-3 Whole HDD
6-2 Skip Error 14
6-3 Erase Master 14
6-4 Unknown Format 14
6-4-1 Copy unknown
6-4-2 Skip unknown
6-5 Transfer Rate 15
6-6 Erase Pattern 15
6.6.1 ONE Byte
6.6.2 4MB Byte
6-7 Language 15
6-8 Advanced Setup 15
6-8-1 Wait HD Time
6-8-2 Lock key
6-8-3 Fan Control
6-9 Restore Default 16
FAQ
4
FAQ 17
Specification
5
Specification 18
2
Basic Introduction
1
1. Overview
This HDD duplicator IT series is a high-end industrial standard hard drive
duplicator that makes HDD duplication fast and easy. There is no computer
or additional software required. The full line HDD duplicators support from 3
targets to 30 targets. Support high data transfer speed up to 100MB~110MB
per second, and it takes one minute to copy around 6GB content. The three
different copy modes (System and Files, All Partition and Whole HDD) can
satisfy various needs of duplication; "System and Files" copy mode is fast copy
mode to copy only data area instead of copying entire source HDD, it can
greatly save elapsing time.
Applying smart power control technology, When copying finished, the machine
will automatically cut off the power of each port to protect HDD during removal
from the duplicator. The power of each port will be only be output when the
operation is started. Besides Quick/Full Erase, it provides with DoD Erase
and DoD EraseComp, which can completely erase the data from hard drives
complying with Department of Defense standard (DoD 5220) and guarantee
the data was completely deleted. As well as this, the modularized interface can
remarkably reduce the time of repair and operation.
2. Features
Three duplication modes: "System and Files", "All Partition" and "Whole
HDD" copy modes.
Compatible with various file system format including 3TB advanced format
HDD.
Automatic power control to protect HDD from damage during insertion
removal.
IT700andIT1500support 6.5GB/mandIT300supports6GB/mincopy,
compareanderaseoperations.
Support DoD Erase to wipe out data efficiently.
Easy firmware updating without complex procedure.
Instant power on and off. Easy to boot up without waiting time.
Standalone, no PC or other installation required.
SATA interface support for SSD & HDD in 3.5"and 2.5".
3
Basic Introduction
1
3. Product Overview
A. System Overview
Source HDD
LCD
B. LCD Configuration
Number of target HDD
Function
Target HDD
Yellow: Powering
Green: Pass
Red: Fail
ForwardTotal size
Confirm/OK
Cancel/Back
Time(mm:ss)
Copied processed size
BackwardCopy progress %
4
C. SATA Module
D. HDD Holder
Basic Introduction
1
5
Basic Introduction
1
E. How to assemble SATA module
3. Slightly pull out the SATA module
F. IDE Module
1. Unplug the cable
2. Unscrew
6
Loading...