Urc MX-880 User Manual

Operating Your System

With the MX-880

COMPL E TE

COMPLETE

CONTROL

ersal RemoteControl

v

i

n

U

™

®

This remote control was
Custom Programmed for you by:

For questions about your Custom Programming call:

Custom Programming of a complex home theater and/or a multi-room
system is one of the most challenging tasks within an audio/video instal­lation. It involves an intimate knowledge of how the components interact
and exact details on the proper sequences of control.

Only a Complete Control dealer has the requisite experience and training
to quickly and effectively customize a remote control for true automated
operation.

Congratulations on your choice!
MX-880 Owners Manual © 2008 Universal Remote Control, Inc.

Front Cover Photo courtesy of Robert Ridenour of Connected Technologies,

.connected-technologies.com

www

The information in this manual is copyright protected. No part of this manual may
be copied or reproduced in any form without prior written consent from Universal
Remote Control, Inc.

UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL,
TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL.

The information in this manual may be subject to change without prior notice.
Complete Control is a registered trademark of Universal Remote Control, Inc.

Entertainment Made Simple is a trademark of Universal Remote Control, Inc.
All other brand or product names are trademarks or registered trademarks of their

respective companies or organizations.

Printed in Korea

Universal Remote Control, Inc.

500 Mamaroneck Avenue, Harrison, NY 10528

Phone: [phone] Fax: [phone]

TABLE OF CONTENTS

Introduction 1

Optional RF “No Rules” Operation 2

Installing and Charging the Battery 3

Programming the MX-880 4

Selecting a New “Activity” 5

Using the MX-880 to Control an “Activity” 6

Accessing the MX-880’s Setup Menus 7

Selecting from the Setup Menus 8

Setting the Color Screen 8

Setting the Button Lighting 9

System Menu 10

Setting the Button Beep Volume 11

Date and Time Menus 12

Erasing and Resetting 13

USA Limited Warranty Statement 13

Specifications 14

Contact Us 14

MX-880 OWNERS MANUAL

Congratulations!

You’ve purchased a unique synthesis of hardware and software engineering,
the Complete Control MX-880. The MX-880 achieves a magnificent combina­tion of power and flexibility, simplifying and automating operation of even the
most complex system.

User Configurable Screen and Button Lighting

A built in pick up sensor can be set to light the screen and/or the buttons
automatically. Additionally, a dedicated LIGHT button enables the user to
backlight the buttons if the pick up sensor is turned off.

Integrated Sound Signaling

The MX-880 incorporates a small speaker for beeps. Anytime you press a
button, the MX-880 signals that it has understood your command with a
beep sound.

Custom Labeled Buttons

When you pick up the MX-880, it automatically lights up the color LCD
screen which labels the six buttons to either side of the screeen. These
button labels change based on what you are watching or listening to.
Thus, if you have selected Watch TV, you will see a list of buttons that
are useful to that activity, while if you select Watch DVD, the buttons
will control the DVD.

Page 1

LIGHT Button

Press the Light button on the
side of the MX-880 to back­light all of the buttons. Of
course, you could opt to set
the buttons to light automati­cally via the pick up sensor.

MX-880 OWNERS MANU

AL

Optional RF “No Rules” Operation

In combination with a Complete Control RF Base Station, the MX-880 can
control your system without being in line-of-sight of the equipment.

To preserve good operation always utilize a Narrow Band RF Base Station
with RF Addressing. RF Addressing gives you the ability to control equip­ment locations throughout your home, even if they are concealed in other
rooms or are behind closed doors.

1. The MX-880 sends radio
waves in every direction, so you
don’t have to point the remote
anymore!

2. The RFX-250 RF Sensor can be freely
positioned for optimal reception.

3. The MRF-350’s built-in Front Blaster sends commands to
components in the same cabinet space as the MRF-350.

4. Self-adhesive “Flashers” affix to the Infrared
sensors on the front panels of your compo­nents. The Flashers relay commands to com­ponents out of sight of the MRF-350’s Front
Blaster. The flashers plug in to the MRF-350’s
rear flasher line outputs via their 10 foot
cables. Uniquely, the MRF-350 can also con­nect to components with rear panel IR Inputs
via its adjustable IR

Page 2

Line Outputs.

MX-880 OWNERS MANUAL

Installing and Charging the Battery

Open the battery cover by pressing
on the release clip and removing
the cover.

Note that the three contacts on the
battery must connect to the three
spring-loaded contacts in the MX-

880. Angle the battery into the bat­tery compartment, contacts first,
then gently fit the rear of the battery
into the compartment as well.
Replace the battery cover by insert­ing the hinged end in first, then
snapping the cover back into place.

You can charge the Lithium Ion bat­tery by simply plugging the includ­ed charger into the base of the
remote as shown here.

The MX-880 can be used while
charging.

Page 3