URC AZ-1, ccGEN2 AZ-1 Owner's Manual
Owner’s Manual
AZ-1
Auxiliary Controller
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
AZ-1 Auxiliary Controller Owner's Manual © 2013 Universal Remote Control,
Inc.
The information in this manual is copyright protected. No part of this manual may be
copied or reproduced in any form without prior written consent from Universal
Remote Control, Inc.
UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL,
TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL.
The information in this manual may be subject to change without prior notice.
ccGEN2 is a registered trademark of Universal Remote Control, Inc.
URC - Control the Experience is a registered trademark of Universal Remote Control, Inc.
All other brand or product names are trademarks or registered trademarks of their
respective companies or organizations.
AZ-1 AUXILIARY CONTROLLER
Congratulations! 1
Features and Benefits 1
Parts Guide 1
AZ-1 Panel Descriptions 2
Specifications 3
Limited Warranty Statement 4
End User Agreement 6
Federal Communication Commission
Interference Statement 7
Declaration of Conformity 8
Page 1
AZ-1 AUXILIARY CONTROLLER
Congratulations!
Thank you for purchasing the ccGEN2 AZ-1 Auxiliary Controller for
use with a CP-1 Central Processor, a RM-1 RF remote control and
other URC RF devices. This device allows for optimal placement of
the system’s RF antenna, allowing for more robust coverage in all
corners of the home or small office space. Designed to work on
URC’s 2.4GHz wireless network, this compact device works with
other devices that use the same RF protocol like the RM-1 remote
and future products.
Features and Benefits
l
Adds a 2.4GHz network antenna to the CP-1 Central Processor
The CP-1 requires the use of the AZ-1 to enable
communication, over the 2.4GHz network, to compatible
devices (RM-1 and other future products etc.). Using this
external antenna allows for optimal placement in the home or
office.
l
Compact design for easy installation
Easily and discretely install the AZ-1 Auxiliary Controller.
Maintain your home decor while controlling your ccGEN2
Central Processor.
Parts Guide
The AZ-1 Auxiliary Controller includes:
1 - AZ-1 Auxiliary Controller
1 - AC Power Adapter
1 - Wall Mount and 4 Screws
1 - Owner’s Manual
AZ-1 Panel Descriptions
The front, rear and bottom panel consists of:
Power LED: When illuminated this light indicates the AZ-1 is ON.
Status LED: The Status LED signifies when the AZ-1 is connected to
the network:
l
Connected: Illuminates green.
l
Not Connected: Remains OFF.
l Pairing: Illuminates orange.
Data LED: The Data LED flashes as the AZ-1 receives and transmits
data.
DC 12V (1A): Plug in the included AC/DC adapter to power up the
AC-1.
LAN: Communicate over the network to an CP-1 using an Ethernet
cable.
Reset: Pressing the Reset button, with a stylus or paper clip, refreshes
the AZ-1. Unplugging and re-plugging the power cable also resets
the unit.
Pressing and holding the Reset button for 15 seconds factory defaults
the AZ-1 and places the unit back to its original factory condition.
Page 2
AZ-1 AUXILIARY CONTROLLER
POWER
LED
STATUS
LED
DATA
LED
DC 12V
LAN
Reset
AZ-1 AUXILIARY CONTROLLER
Specifications
Microprocessor: ARM32-bit Cortex- M3 (120MHz)
Memory: 128+4Kbyte SRAM, 768Kbyte Flash
RF Range (radio frequency): 50 to 100 feet, depending upon the environment
RF Frequency: 2.405~2.480 GHz
Weight: 3.058 oz
Size: 3.74” X 2.7” X 1.1”
Power: 12V DC 1A
Page 3
Loading...