Urbanista Melbourne User Manual

MELBOURNE CONTROLS

Volume

Down

Bluetooth

Pairing

TOP SIDE

Micro USB

3.5mm

Power

Button

Volume

Up

LED

Indicator

Auxilary
Input

On/Off: Press the power button for 3 seconds

Sync: Press the bluetooth pairing button button for 3 seconds

Volume: Press + or – buttons to adjust

Playing Time: 6 hours

Charging Time: 2 hours

Bluetooth Distance: 10 meter s

HOW TO SYNC THE SPEAKER WITH YOUR BLUETOOTH DEVICE:

To turn on your Melbourne speaker, press and hold the On/Off button for 3 seconds. The small blue light in the above panel will show continuous blinking.

Switch on Bluetooth from your phone or your computer and search for “Urbanista Melbourne”. Once the blue light stops blinking, the two devices are paired and
you can start using Melbourne for listening to music or receive phone calls.

If your device do not support Bluetooth you can connect it to your Melbourne speaker by using the 3.5mm audio jack connector.

To charge the batteries of Melbourne, connect the complimentary cable A to the micro USB connection and the USB to a power source.

Bluetooth Version: 4.0

Water Resistance: IPX4

Standby Time: 30 Hours

New Bluetooth Connection: In the off mode, press and hold the multifunction

button for 10 seconds until you hear a beep repeated three times and the blue

LED flashes