Urbanista BOSTON User Manual

BOSTON

(SPORT)

Manual:
BOSTON

Category:
SPORT

(ENG) (ENG)

WELCOME TO THE URBANISTA
COMMUNITY! #urbanistalife

Thank you for purchasing a pair of Urbanista Boston
earphones . Urbanista is inspired by urban environments
all around the world. Our products are developed to
enhance an active, mobile lifestyle.

Designed to be rain- and sweat-resistant (IPX5), the
Boston set should, however, not be submerged in
water. Make sure to cover the micro USB port with
the silicone lid to protect the set against water.

To turn Boston on, press the logo button for 5 sec­onds. Boston will be on and it will go into synch
mode. The blue LED light will blink continuously.
Open the Bluetooth settings on your phone, click on
“Urbanista Boston” in “Available devices.”

LED

USB port

Bluetooth® unit.

Volume control
hands free.

When the two devices are connected, you can start
using Boston to listen to music, or to make phone
calls. Once connected, the blue LED light will flash
evey 10 seconds.

FUNCTIONS

Volume: Tap on the + or – buttons
Skip to next track: Press and hold the + button
Skip to previous track: Press and hold the – button
Answer: Tap on the logo button
Hang up: Tap on the logo button
On/Off: Press and hold the logo

button for 5 sec.

The set has a play time of around 6 hours and a
15 days-standby time. A full charge takes around 1
hour. The blue LED light is on while charging and it
turns off when the battery is full. The Bluetooth®
range is of about 10 meters, without obstacles
between the two devices.

(ENG) (ENG)

To charge the battery of the Boston set, connect the
complimentary cable to the micro USB port, and the
USB plug to an energy source such as a computer.

The winged GoFit silicone replacements come in three
sizes. To get the most out of your wo rkout, it’s important
to choose the size that fits you best. To remove the
silicone plug, very carefully pull it over the two
latches that secure the wing. To put the silicone re­placement back on, gently place it over the earphone
using the same motion in reverse.

Clean the earphone s gently with a cloth. When re­moved, the GoFit silicone plugs can be rinsed with
soap under running water. Make sure they are dry
before putting them back on.

If you need instructions in additional languages,
visit us at:

Anleitung und Informationen können unter folgen­dem Link abgerufen werden:

Pueden encontrar el modo de empleo y información
técnica aquí:

www.urbanista.com/instructions

1. Boston, GoFit - Spor t

2. Pull & remove gently