Uqique UQ-VR898 User Manual

UQIQUE

TM

Controls

Power On/Off

Digital Voice Recorder

UQ-VR898

Uqique Co., LLC

340 S Lemon Ave #8106
Walnut, CA 91789
United States

This package contains:

• Main Product

• User Manual

• USB Cable Adapter

• Earphones

Attention

Don't disassemble

Don't expose to liquids

Avoid extreme temperatures

Avoid direct sunlight or dust, moisture, steam, soot, etc

Customer Service

For inquiries regarding this product, please contact the authorized
reseller or our support team

at [e-mail]

Our Guarantee to You

• 12-month limited warranty

• Lifetime technical support

For FAQs and more information on the product, please visit:

uqique.com/product-support

Indicator Light

Volume Up/
Next Audio

Volume Down/
Music or Recording

Play Mod

e Select

Record/
Playback

Audio Jack/
USB Port

Microphone

Record/
Playback

Recording

ON [Start recording]

Toggle the power switch to [ON] and the indicator light glows and blinks in red
few times before going off, the device is now in Recording Mode. With its
intelligent auto-save feature, all recordings are saved instantly. With its optional
voice activated feature, the device will only records when there is any voice or
sound available. Toggle the power switch to [OFF] to stop recording.

Note:

• Upon toggling the power switch to [ON], it takes approximately 8~10 seconds
before recording begins.

• Upon toggling the power switch to [OFF] after recording, please wait for 3~5
seconds for the indicator light to goes off before you turn on the device again.

• To turn on the voice activated feature for recording, press and hold [-] button
while you toggle the power switch to [ON], wait for the indicator light to goes off
before you release the button.

• To check if the status is in Recording Mode, press and hold [+][-] buttons
together; if the indicator light glows and blinks in red one time, this indicates that
recording is in progress.

• The device will not record if earphones are plugged into the Audio Jack/USB Port.

• If memory capacity is full, no further recordings can be made.

• If battery died while recording, all audio until the time of power loss will be saved.

• Due to the sensitivity of the device, hitting or rubbing on it while recording may
cause interference and result in unwanted noise to be recorded.

OFF [Stop recording]

Playing Back

By default, the device will play music files first (so there
will be no sound if there are no music files inside),
therefore you need to press the [-] button to switch to
Recording Play Mode.

Charging

When using the device for the first time or after a long
period of non-usage, please charge it fully before use.

Computer

[Red]

light :

[Blue] light

Charging

: Fully charged

[Red] light : Playback recordings
[Blue] light : Playback music

�

�

With the earphones plugged in, toggle the power switch to [ON] and the device
will playback audio files. The indicator light glows and flashes continuously :
(in Blue when playback music; in Red when playback recordings), the device is
now in Playback Mode. To stop playback, toggle the power switch to [OFF] and the
device will be turned off.

Note:

• Press the [+] button to skip to the next audio file.

• Press the [-] button to switch between Music or Recording Play Mode.

• Press and hold the [+] button to increase the volume.

• Press and hold the [-] button to decrease the volume.

Deleting an audio file

• To delete an audio file while playing back, press and hold [+][-] buttons together
and the indicator light flashes in purple continuously; then press and hold either
[+] or [-] button and the indicator light blinks in blue before going off. The current
file is being deleted.

• To delete all audio files while playing back, press and hold [+][-] buttons
together and the indicator light flashes in purple continuously; then press and hold
[+][-] buttons together and the indicator light blinks in red before going off. All
files are being deleted.

Fast forwarding or rewinding an audio file

• To activate the Fast Forward/Rewind Mode, plugged in the earphones and toggle
the power switch to [ON]; while the indicator light glows in red, press and hold [+]
[-] buttons together and the indicator light will glows and flashes in purple. The
Fast Forward/Rewind Mode is now being activated. Press and hold the [+] button
to fast forward; press and hold the [-] button to rewind. Note: You will not be
able to adjust the volume while in Fast Forward/Rewind Mode.

Volume Down/
Music or Recording
Play Mode Select

Audio Jack/
USB Port

Connect the device to your computer with the USB cable adapter, the device is
now being charged. The indicator light glows and flashes in red continuously while
charging. Upon fully charged, the indicator light will stop flashing and turns into
solid blue color. Please keep the device turn off while charging. A quick 60
minutes is enough to fully charge the device.
Important: Do not overcharge the device due to its compact size. Please do not
leave the device in charging mode for a prolonged period of time.

Tip:

To charge the device while recording, toggle the power switch to [ON] and
connect to the computer with the USB cable adapter; press and hold [+][-]
buttons together until the indicator light goes off. The device is now in Recording
Mode while charging.

Accessing Files

Connect the device to your computer with the USB cable provided and you’ll be
able to access the files in the device on your computer. You can then easily delete,
add , copy or transfer any files just like any other USB device. The device will

shown up as a "Removable Disk" on the computer, whereby you would be able to
access the recordings inside the "VOICE" folder, under the "RECORD" root folder.

Note: Please ensure that the 3.5 mm plug is pushed in all the way to the jack
socket on the recording device. Push firmly to make sure it is actually all the way
in, neatly and fully plugged into the jack socket until you hear a click sound. Plug
the USB end into your computer. The indicator light glows and flashes in red
continuously, and it should be detected as an external drive in about a few
seconds. Once plugged in, the device wakes up and is configured as a USB mass
storage device.

Specifications

• Model Number: UQ-VR898

• Dimensions: 52*20*9 mm

• Weight: approx. 12.5 gram

• Built-in Memory: 8GB

• Battery Capacity: 5V/500mAh

• Power Consumption: 8mA

• Charge Time: approx. 1 hr

• Battery Life: approx. 20~24 hrs

• Compatible Operating Systems: Windows Vista/7/8/8.1/10 and Mac OS X 10.0 or later

• Operating Temperature Range: -5 degrees Celsius to 40 degrees Celsius

• Recording Time: approx. 96 hrs

• Recording File Format: .wav

• Playback File Format: .mp3/.wma/.wav

• Recording Bit Rate: 192 kbps

• Sampling Frequency: 48kHz

• PC-interface: USB 2.0