Upstar LED HDTV, P32EDT User Manual
User Manual
32" LED TV
Congratulations on your new UPSTAR 32" LED HDTV purchase. Thank you for your support.
To ensure safety and many years of trouble free operation of your TV, please read the manual
carefully before making any adjustments, and keep them in a safe place for future references.
We hope you enjoy your new UPSTAR HDTV.
R
Safety Pr ecautio ns
English -1
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE
CAUTION
RISK O F EL EC TR IC SHOCK
DO NOT OPEN
CAUT IO N: TO R ED UC E TH E RI SK OF ELECT RI C SH OC K
DO NOT REMOVE CO VE R (O R BA CK)
NO USER- SE RV IC EA BLE PAR TS I NS ID E
FREE SERVICI NG TO QUALIF IE D SE RV IC E PE RSONN EL .
The l ig ht ning flas h wi th arrow- he ad
sym bo l, within an eq ui lateral t ri an gle,
is in te nd ed to ale rt t he user to th e
pre se nc e of uninsu la te d “danger ou s
vol ta ge ”within the p ro duct's en cl os ure
tha t ma y be of sufficient m ag ni tude to
con st it ute a ris h of e lectric s ho ck to
per so ns .
The e xc la mation po in t wi thin a tr ia ng le
is in te nd ed to ale rt t he user to th e
pre se nc e of import an t op erating a nd
mai nt en ance (ser vi ci ng)instru ct io ns in
the l it erature acc om pa nying the p ro duct .
CAUTION:TO PREVENT ELECTRIC SHOCK ,MATCH WIDE BLADE OF PLUGTO WIDE SLOT ,FULLY INSERT .
CAUTION:
Do not place this product on an unstable cart, stand, tripod ,bracket or table. The product
may fall causing serious personal injure and serious damage to the product. Use only a
cart stand, tripod ,bracket, or table recommended by the manufacturer or sold with the product.
Follow the manufacturer's recommended by the manufacturer . a product and cart combination
should be moved with care. Quick stops, excessive force ,and uneven surfaces may cause the
product and cart combination to overturn .
WARNING:
FCC regulations state that any unauthorized changes or modifications to this equipment not
expressly approved by the manufacturer could void the user's authorith to operate this equipment.
NOTE TO CATV SYSTEM INSTALLER:
This reminder is provided to call the CATV system installer's attention to Article820-40of the
National Electrical Code that provides guidelines for proper grounding and , in particular ,specifies
that the cable ground shall be connected to the grounding system of the building .as close to the
point of cable entry as practical.
NOTICE:Where the mains plug or an appliance coupler is used as the disconnect device,the disconnect device
shall remain readily operable.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such
as vases. shall be placed on the apparatus
A warning that an apparatus with CLASS I construction shall be connected to a MAINS socket outlet with
a protective earthing connection.
WARNING:
Electricity is used to perform many useful functions, but it can also cause personal
injuries and property damage if improperly handled. This product has been engineered
and manufactured with the highest priority on safety. However, improper use can result
in electric shock and / or fire. In order to prevent potential danger, please observe the
following instructions when installing, operating and cleaning the product. To ensure
your safety and prolong the service life of your Liquid Crystal Television, please read
the following precautions carefully before using the product.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade and the third prong are provided
for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
the plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightening storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
Impor tant Safety Instr uctions
English -2
Safety Instr uctions
English -3
This product is designed and manufactured to operate within defined design limits, and
misuse may result in electric shock or fire. To prevent the product from being damaged, the
following rules should be observed for the installation, use and maintenance of the product.
Read the following safety instructions before operating the display. Keep these instructions
in a safe place for future reference.
To avoid the risk of electric shock orcomponent damage, switch off the before connecting
other components to the TV.
Unplug the power cord before cleaning the TV. Please use the included custom bezel cleaning
cloth for cleaning the bezel of the TV only. Do not use a liquid or a spraycleaner for cleaning
the product. Do not use abrasive cleaners.
Always use the accessories recommended by the manufacturer to insure compatibility.
When moving the TV from an area of low temperature to an area of high temperature,
condensation may form on the housing. Do not turn on the TV immediately after this to avoid
causing fire, electric shock or component damage.
Do not place the TV on an unstable cart, stand, or table. If the TV falls, it can injure a person
and cause serious damage to the appliance. Use only a cart or stand recommended by the
manufacturer or sold with the TV.
Any heat source should maintain a distance of at least 5 feet away from the TV, i.e. Radiator,
heater, oven, amplifier etc. Do not install the product too close to anything that produces
smoke or moisture. Operating the product close to smoke or moisture may cause fire or
electric shock.
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To
ensure reliable operation of the TV and to protect it from overheating, be sure these
openings are not blocked or covered. Do not place the TV in a bookcase or cabinet unless
proper ventilation is provided.
Never push any object into the ventilation slots of the TV. Do not place any objects on the
top of the Product. It could short circuit parts causing a fire or electric shock. Never spill
liquids on the TV.
Do not use the TV in a portrait format (by rotating 90 degrees) under high temperature
environment (25°C or higher), since this would retard heat dissipation and would eventually
damage the TV.
The TV should be operated only from the type of power source indicated on the label. If you
are not sure of the type of power supplied to your home, consult your dealer or local
power company.
The power cable must be replaced when using different voltage from that specified in the
User Manual. For more information, contact your dealer. The TV is equipped with athree-pronged
grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power
outlet as a safety feature. If your outlet does not accommodate the three-wireplug,
have an electrician install the correct outlet, or use an adapter to ground the appliance
safely. Do not defeat the safety purpose of the grounded plug.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Only the marked power source can be used for the product. Any power source other than the
specified one may cause fire or electric shock.
Do not touch the power cord during thunderstorms. To avoid electric shock, avoid handling the
power cord during electrical storms.
Unplug the unit during a lightning storm or when it will not be used for a long period of time. This
will protect the TV from damage due to power surges.
Do not attempt to repair or service the product yourself. Opening or removing the back cover may
expose you to high voltages, the risk of electric shock, and other hazards. If repair is required,
please contact your dealer and refer all servicing to qualified service personnel.
Keep the product away from moisture. Do not expose this appliance to rain or moisture. If water
penetrates into the product, unplug the power cord and contact your dealer. Continuous use in
this case may result in fire or electric shock.
Do not use the product if any abnormality occurs. If any smoke or odor becomes apparent, unplug
the power cord and contact your dealer immediately. Do not try to repair the product yourself.
Avoid using dropped or damaged appliances. If the product is dropped and the housing is damaged,
the internal components may function abnormally. Unplug the power cord immediately and contact
your dealer for repair. Continued use of the product may cause fire or electric shock.
Do not install the product in an area with heavy dust or high humidity.
Operating the product in environments with heavy dust or high humidity may cause fire or electric shock.
Hold the power connector when removing the power cable. Pulling the power cable itself may
damage the wires inside the cable and cause fire or electric shocks. When the product will not be used
for an extended period of time, unplug the power connector.
To avoid risk of electric shock, do not touch the connector with wet hands.
Insert batteries in accordance with instructions while using the remote control. Incorrect polarities may
cause damage and leakage of the batteries, operator injury and contamination the remote control.
If any of the following occurs please contact the dealer:
The power connector fails or frays.
Liquid sprays or any object drops into the TV.
The Display is exposed to rain or other moisture.
The Display is dropped or damaged in any way.
The performance of the Display changes substantially.
Operating environment: Temperature: 5°C ~ 35°C, Humidity: 10% to 90% non-condensing,
Altitude: 0~10,000 ft.
Safety Instr uctions
English -4
Impor tant Information
English -5
Television Antenna Connection Protection
Lightning Protection
For added protection of the TV during a lightning storm or when it is left unattended or
unused for long periods of time, unplug the TV from the wall outlet and disconnect the
antenna or cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall
into such power lines or circuits.
External Television Antenna Grounding
If an outside antenna or cable system is to be connected to the TV, make sure that the
antenna or cable system is electrically grounded to provide some protection against
voltage surges and static charges. Article 810 of the National Electrical Code,
ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of
the grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements of the grounding electrode.
ANTENNA LEAD IN WIRE
ANT ENN A DIS CHA RGE UNIT
(NE C SECTIO N810- 20)
GRO UNDIN G CONDU CTO RS
(NE C SECTI ON810 -21)
GR OU ND CL AMP S
POWER SERVICE GROUDING ELEC TRODE SY STEM
(NEC ART 250, PART H)
GR OU ND C LAM P
EL EC TRI C SERVI CE E QUI PME NT
Opening the Packa ge
English -6
The UPSTAR TV is packaged in a carton. Any standard accessories are packed aslo in this carton.
The weight of the TV is approximately lbs. Due to the size and weight of the product, it is
suggested that it must be handled by a minimum of 2 or more persons. Since the glass can be easily
scratched or broken, please handle the product gently. Never place the unit on a surface with the
glass facing downwards unless it is on protective padding. When opening the carton, check that the
product is in good condition and that all standard accessories and items are included. Save the
original box and all packing materials for future shipping needs.
36.4
UPSTAR TV Display x 1
TV Stand x 1
User Manual x 1
Power Cord x 1
TV Remote Control x 1
AV Cable x 1
Please read the user manual carefully before performing the installation. The power consumption
of the display is approximately watts. Please use the power cord designated for the product.
When an extension cord is required, use one with the correct power rating. The cord must be
grounded and the grounding feature must not be defeated. The product should be installed on a
flat surface to avoid tipping. Space should be maintained between the back of the product and the
wall for proper ventilation.
If you would like to mount the TV onto the wall, please see page 7, and 9 for additional information.
Avoid installing the product in the kitchen, bathroom or other places with high humidity dust or smoke,
so as not to shorten the service life of the electronic components. Please ensure the product is
installed with the screen in landscape orientation. Any 90° clockwise or counterclockwise installation
may induce poor ventilation and successive component damage.
110
Packa ge Conten ts
Installation
1.Please place the TV host on your desktop as sc reen side down(make the bo ttom edge
be yond deskto p), fix base stand into the gap.
2. Fixed base to th e stand with 8 screws in the screw bag as follow pict ure,then place the
TV set on desktop erectly.
3. To remove the base sta nd off the TV set , guidance as follow: Po wer off the TV and
di sconnect the p ower cord plug . Place the TV hos t on your deskt op as screen faces
do wn(make the b ottom edge be yond deskto p). Remove screws in stand of Picture 1 ,
remove the sta nd.
4.To install your TV set on the wall, please refer to the instructions on page 9 "Rear View Mounting
Pattern" of user's manual.
Table of Contents
English -8
Safety Precations
Important Safety Instructions
Safety Instructions
Important Information
Television Antenna Connection Protection
Opening the Package
Package Contents
Installation
Attaching or Removing the Stand
Table of Contents
Identifying Front and Rear Pannel 9-10
Remote Control 11
Connection Suggestions 12-15
Basic Use 16
Picture 17-18
Sound 19
Channel 20-21
Parental 22-26
Set Up 27-28
Others 29
Rating Explained 30
Aspect Ration 31
Trouble Shooting 32-34
Specification 35-36
Warranty Appendix
1
3-4
5
2
5
6
6
6
7
8
Identifying Fron t and Rear Panel
English -9
Indicator Light: the light is red when power is plugged in
but the TV is not turned on. The light turns blue when the TV
is turned on. Because of the LED in the panel, the TV might
take 10 12 seconds to power on.
Front View
Indicator Light
Remote Sensor
Remote Sensor: the remote sensor receives all the
commands from the remote control.
Mounting Specification : 200mm x 100mm using screw size
M6. Length of screw should not exceed 12mm.
Please Note : The 12mm length of screw refers to how deep
the screw can go inside the mounting holes. When you're
buying screws, you should add the original 12mm to the
thickness of your mounting plate in order to get the total
screw length.
Rear View Mounting Pattern
Side Control Buttons
1. SOURCE : this button switches between all the different
sources of the TV. When the OSD is active, this button
acts as the enter button and confirms the menu selection
2. MENU: this button activates the On Screen Display (OSD).
If a sub-menu is active, pressing this button will exit the OSD.
3. VOL(▲): this button increases the TV's volume. If a
sub-menu is active, pressing this button will move the
select right.
4. VOL( ) : this button decreases the TV's volume. If a
sub-menu is active, pressing this button will move the
selection left.
5. CH(▲) : this button changes the TV channel up. If the
OSD is active, this button functions as up for the menu.
6. CH( ) : this button changes the TV channel down. If the
OSD is active, this button functions as down for the menu.
7. STANDBY: turn on the TV by pressing the button once.
Press the button again to turn off the TV. .
▲
▲
SOURCE
MENU
VOL
CH
STANDBY
: Power on/off
100
200
Identifying Fron t and Rear Panel
English -10
Rear View Connections
RF
9
10
11
Rem ot e ControlRem ot e Control
English -11
POWER: This b utto n turns the TV on or off. B ecau se of the size
of the pa nel wi ll take 10 12 seconds to po wer on .
SOURCE: Pre ss to di splay and select the av aila ble video sources.
CC: This butt on tur ns on the closed captio ning s ystem of the
televisio n. Ple ase Note : CC only works un der th e sources
TV, AV1, a nd AV2.
MTS: This but ton sw itches between the ma in aud io and the
(SAP) s econ d audi o programming.
MUTE: This bu tton s tops the TV from produ cing a ny sound.
0-9 : These bu tton s allow you to access the c hann els di rectly.
When access ing a di gital channel you wou ld use t hese
butto ns in ju ncti on with the (-) button to s witch channels.
(-) : This but ton al lows you to access digi tal ch anne ls directly
when used in ju ncti on with the number butt ons 0- 9.
R : This butto n allo ws you to jump between yo ur cur rent channel
and the last ch anne l you were on.
GUIDE: Thi s butt on turns on the electro nic pr ogram guide that
is rece ived f rom over the airwave an tenn a.
INFO: This fu ncti on tells you the LED's cu rren t display informati on.
▲▼◄►ENTER: These bu tton s allow you to navigate i nsid e the
OSD men u. Th ey als o function as CH+/- for d igit al
chann els in t he tuner.
MENU: This bu tton t urns on the on screen dis play m enu (OSD).
EXIT: This but ton al lows you to quit from the O SD men u
VOL(+/-): T hese t wo buttons increase o r decr ease the volume of
the TV.
CH(+/-) : Th ese tw o buttons change the TV chan nel up o r down.
ASPECT : Thi s butt on changes the TV between di ffe rent display
modes .
FREEZE : Thi s butt on freezes the video. P ress t he button again
to unfr eeze t he screen
SLEEP : This b utto n enables the sleep fun ctio n where the TV
turns i tsel f off after the design ated t ime.
FAV : This button ope ns the f avorite channel lis t.
FAV (+/ - ) : Press FAV+/- to c hange forward/ back ward F av
chann el for TV.
ADD/DEL: This bu tton adds/deletes a c hann el to the favorites
list wh ile yo u are using the TV tuner.
PICTURE : Th is but ton selects different op timi zed picture
setti ngs fo r the TV.
SOUND : This b utto n selects different opti mize d sound settings
for the TV.
TV: Pree to sele ct the Tv mode directly
USB: This but ton en ables the USB picture a nd MP3 p laying
funct ion in t he TV.
Source
RF
Connection Sug gestion s
English -12
1. Make sure the power of HDTV is turned off.
2. Connect the Coaxia l RF cable from your antenna or digital cab le to the TV po rt on the
back of your HDTV.
3. Turn on the HDTV.
4. Follow the first time on scre en instructions.
Please Note :
Not all broadcasts are in High Definition (HD). Please refer to your local broadcasting
stations for more information.
The HDTV's tuner is designed for HDTV therefore requires a stronger signal than normal TVs.
If you cannot achieve that sig nal level with your antenna or cable, your HDTV might lose
picture or sound.
If You Have Digital Ca ble without Cable Bo x or Antenna…
Connecting DVD Player with Component YPbPr…
Loading...