Page 1
UPEASY Power Seat Users Guide
Disclaimer
Instructions and recommendations for safe and proper use are outlined in this Users Guide. Uplift Technologies Inc.
is not liable for property damage or personal injury arising out of unsafe or improper use of the UPEASY Power
Seat. Uplift Technologies Inc. is not responsible for injuries and/or damage resulting from any person’s failure to
exercise good judgment and/or common sense.
If you are having any difficulty operating your UPEASY Power Seat, or do not feel capable of operating it safely
and comfortably, please contact the place of purchase for assistance.
By Uplift Technologies Inc.
Safety Precautions
1. Use the UPEASY Power Seat only in
armchairs or sofas with at least one
armrest for optimum stability when sitting
or rising.
2. UPEASY Power Seat is not intended for
use in rocking chairs, wheelchairs, office
chairs, or any chair with wheels. Not for
use in motor vehicles.
3. As with any electrical device, do not use
the UPEASY Power Seat in or near water.
Please refer to the Safety
Instructions section for further
details.
Page 2
The following safety instructions and tips will
help you operate your UPEASY Power Seat
safely. Follow them carefully to avoid personal
injury.
• As with any electrical device, do not use the
UPEASY Power Seat in or near water.
• Do not operate if the power cord has been
damaged.
• Do not grab the side of the lifting cushion
when in use. Keep fingers clear of the lifting
mechanism.
• Unplug your UPEASY Power Seat before
performing any electrical inspection.
• Do not attempt to fix electrical problems
yourself. This will void the warranty.
• Do not allow children or pets near the
UPEASY Power Seat while it is in motion.
• Do not allow the fabric to come into direct
contact with any type of heat source, as
personal injury or fire damage may occur.
• Use only in chairs and sofas that have at least
one available arm for optimum stability when
you are sitting or rising.
• Not for use in rocking chairs, wheelchairs,
office chairs, or any chair with wheels.
• Not for use in motor vehicles.
• Not for use in the bathroom.
• Consult your physician to ensure you do not
have particular physical limitations or are
taking medications which may contraindicate
the safe usage of the UPEASY Power Seat.
Safety Instructions
UPEASY Power Seat Users Guide
2 04/21/2004
Thank you for purchasing the UPEASY Power
Seat. The UPEASY Power Seat was engineered
to provide you with the utmost in comfort and
convenience. With proper care and use, this
lifting cushion should provide you with years of
trouble-free mobility assistance.
For instructions on correct assembly and proper
use of your UPEASY Power Seat, please read
this manual in its entirety. For more information
on the UPEASY line of lifting cushions, visit
our Web site at www.upeasy.com.
UPEASY Power Seat Benefits
UPEASY Power Seat is
truly the affordable
alternative to a lift chair,
or a portable accessory
for those who already
own one. UPEASY
Power Seat has a built-in
handle, and is easy to
carry from place to
place.
This lifting cushion
adapts to your current
furniture and provides
100% lift for users weighing up to 300 lb./136
kg.
Welcome Power Seat Users
Page 3
Please check to see that all parts are included in
your package. Contact your dealer if any
product parts are missing or damaged. Send in
your Warranty Card today to ensure that you are
registered.
Assembly & Testing
For correct operation, and to ensure prevention
of electrical shock, follow these directions for
assembly.
1. Place your lifting cushion on an appropriate
chair.
2. Insert the power lever(s) over the steel
prongs on either side of the lifting cushion at
the front. Angle the levers towards the front
as shown in the photo below. The levers
should clip easily into place.
3
Before using your UPEASY Power Seat, please:
1. Check package contents to ensure that all
components are enclosed and in good
condition (see picture below).
2. Test the lifting cushion to ensure that it is in
working order.
Check Package Contents
Your UPEASY Power Seat comes with the
following components:
• UPEASY Power Seat (in the flat position)
with power cord
• Two power levers
• This Users Guide and your Warranty
Registration Card
Before Using your Power Seat
www.upeasy.com
Specifications
CSA & C/US Approved
US Patent #5,316,370. Other US, European and
International patents pending.
Seat Dimensions:
Length: 19"/48 cm
Width: 16"/41 cm
Cover: 100% polyester.
Seat Height:
Lifted: 10"/25 cm
Flat (When Seated): 2"/5 cm
Weight:
12 lbs/5.4 kg
Capacity:
For users weighing up to 300 lb/136 kg
Power Supply:
120 VAC 60 Hz 0.6 A
Cord Length:
10 ft/3.0 m
Power Cord
Two (2) power
levers
Lifting
cushion in
flattened
position
Page 4
UPEASY Power Seat Users Guide
4 04/21/2004
3. Plug the power cord into an electrical socket.
4. Test your UPEASY Power Seat before using
it to ensure it is operating properly. There
are three operating positions: up, down and
stop. We recommend that you become
familiar with these before using your lifting
cushion.
Gently lift the lever up to raise the seat.
Select the middle setting to stop. Press down
to lower.
Note: Your UPEASY Power Seat will also
automatically stop when it is at its full height, and
when it is completely lowered, unless you move the
power lever to the “stop” position.
This section explains how to safely use your
UPEASY Power Seat.
Choosing Appropriate Chairs
The UPEASY Power Seat may be used on most
chairs, recliners and sofas – but always next to an
armrest. This is to ensure the utmost stability
when using the UPEASY Power Seat. We also
recommend that the chair or sofa you are using
it on have a suitably stable seating surface.
Setting Up For Use
When placing your UPEASY Power Seat on
your chair or sofa, the lever(s) should be to the
front and free from obstructions. Also, make
sure the cord is not under the base of the seat to
prevent it from damage or from becoming
unplugged. Finally, ensure that the cord is out
of the way so that no one can trip over it.
Using Your UPEASY Power Seat
Your UPEASY Power
Seat will add two inches
(2"/5cm) to the height
of your chair, recliner
or sofa when you are
seated. In order to use
your UPEASY Power
Seat safely, you will
need to keep both feet
on the floor at all times.
There are three ways to ensure you are able to
keep your feet on the floor at all times during
use:
(1) Use the “stop” position on the power
lever to control the height of the
UPEASY Power Seat. When rising,
simply stop the cushion at the point
where you are able to get out of the
chair comfortably with both feet on
the floor. When you go to sit again,
your UPEASY Power Seat will be
positioned at the perfect level for you
to sit comfortably.
(2) If the seat cushion of the chair/sofa
is removable, try using your UPEASY
Power Seat without the cushion, or
substitute a lower cushion.
(3) Reduce the height of the chair or sofa
by trimming the legs so that your feet
remain on the floor.
Obviously, method (1)
requires the least trouble
and effort, so try that
first. Now that you have
your UPEASY Power
Seat placed in your chair
or sofa, gently pull the
lever up and let it rise to
Page 5
Rising from a Seated Position
• Place your hand(s) on the arm(s) of the
chair, or sofa and ensure both feet are on the
floor.
• Click one of the levers upwards – past the
“stop” position – and release.
• The motor will raise the lifting cushion and
automatically shut off when it is fully raised
– unless you choose to stop it first.
Using the “Stop” position
You can use the “stop” (center) position on the
power lever to stop your UPEASY Power Seat
at any time. You may want to use this:
• When rising – if you have reached the desired
height.
• Anytime you feel it is necessary to maintain
your stability.
a height that allows you to sit while keeping
both your feet on the floor. Stop it when it gets
to the appropriate height by gently pushing
down to the “stop” position on the power lever.
Now your UPEASY Power Seat is ready for use!
Note: If you have to hop up to get onto the UPEASY
Power Seat, then you have raised it too high. Simply
lower your lifting cushion so you can sit down with both
feet on the floor.
Operating Instructions
When operating your UPEASY Power Seat,
keep at least one hand on the arm of your chair
or sofa to ensure stability.
You only need to use one of the power levers to
raise and lower the seat.
Lowering into a Seated Position
Note: Your UPEASY Power Seat should be in the
raised position.
• Facing away from the seat, place your
hand(s) on the arm(s) of the chair, or sofa.
• Sit on the raised lifting cushion – keeping
both of your feet flat on the floor.
• Click one of the levers downward – past the
“stop” position – and release.
• The motor will lower the lifting cushion and
automatically shut off when it is fully
lowered – unless you choose to stop it first.
Note: Please remember that it is neither necessary, nor
advisable to keep pushing/pulling on the lever once the
motor has started.
www.upeasy.com
5
Lowering the lifting
cushion
To lower into a seated position,
gently push downward on the
power lever.
Raising the lifting cushion
To rise from a seated position,
gently pull upward on the
power lever.
Page 6
What if my UPEASY Power Seat does not operate at
all when I push/pull on the lever?
• First, ensure the lever is firmly installed. You
should hear a click when it is inserted over the
metal prong in the base. It should not come
out when you tug gently on it.
• Check that the power cord is plugged firmly
into a properly wired wall outlet.
• If the above measures fail, check your circuit
breaker box as a final step before concluding
there is a problem with the product.
Where do I find the serial number on my lifting cushion?
The serial number is a 10 digit number on a
narrow white sticker, located on the base of the
seat.
What if I am having difficulty setting up or using my
UPEASY Power Seat?
First read all instructions carefully to ensure you
have set up your lifting cushion correctly. If you
are still having difficulty, or do not feel capable of
operating this lifting cushion safely, please contact
your authorized UPEASY Power Seat vendor for
assistance.
Trouble Shooting
Wipe up any spills on cover immediately.
Remove cover for washing or to clean the
foam cushion surface.
Machine-wash your fabric cover in cold
water and hang to dry.
Wipe down the foam cushion surface with a
damp sponge. (We recommend using mild
cleaners and detergents.)
-free operation. Visually inspect the
Do
: Attempting to fix electrical components may result
Care and Maintenance
04/21/2004
Page 7
www.upeasy.com
7
Correct Usage: Both Feet on the Floor
Before sitting, ensure the UPEASY Power Seat is at the ideal
height for you to sit while keeping both feet flat on the floor.
Keep at least one hand on an armrest for support while
lowering the cushion.
Incorrect Usage – Too Much Force on Power Levers
Power levers require minimum force in order to operate the up
and down motion. Placing excessive force on the levers is
unnecessary and could result in the levers breaking.
Correct & Incorrect Positioning
Incorrect Usage – Cushion too High
If your UPEASY Power Seat is raised too high, you will have
difficulty sitting down without hopping onto the cushion.
In order to maintain stability and reduce your risk of falling,
lower the cushion to a height that allows you to keep both feet
on the floor.
Incorrect Usage – Sitting Lopsided
If your UPEASY Power Seat is correctly positioned, you
should be able to sit down squarely on the cushion and keep
both feet on the floor. If you find yourself sliding sideways
onto the cushion, the cushion is lifted too high for you, and
you could fall or damage the product. Instead, lower the
cushion to the correct height before using.
Page 8
UPEASY Power Seat Users Guide
Warranty
Uplift Technologies Inc. warrants your UPEASY Power Seat against product failure for one year
from the date of purchase. Damage due to neglect or misuse is not warranted, nor is this warranty
transferable.
If your UPEASY Power Seat is defective in material or workmanship Uplift Technologies Inc. will,
at its discretion, either repair or replace your UPEASY Power Seat throughout the duration of the
year at no charge except for the current delivery charge.
This warranty is void if the product has been modified with unauthorized parts or attachments.
NOTE: To ensure that we have your Warranty information on file, complete and return
your Warranty Registration card today.
Warranty Returns
If your UPEASY Power Seat fails to function
as warranted, contact the original place of
purchase for assistance. You will be required to
provide date and proof of purchase.
We encourage all vendors to provide warranty
service for UPEASY Power Seat customers so
that you do not experience delays in receiving
a replacement unit.
Please Note:
No returns will be accepted without a Return
Authorization Number (RA). Please have your
vendor call 1-800-387-0896 for your RA
Number.
We strongly recommend that you use the
original packaging material and box for all
Warranty returns. These items were designed
to withstand the shipping process. If the
UPEASY Power Seat incurs any damage due
to improper packaging, the cost for repair will
be charged back to you.
www.upeasy.com
Loading...