Uovision HomeGuard WiFi, W1 Instructions Manual
1
HomeGuard WiFi
WiFi Camera Instruction
2
Contents
1. Device introduction -----------------------------------------------3-7
2. Quick Guide----------------------------------------------------------8-23
3. Device Setting Methods ------------------------------------------24
4. Camera Settings instruction -------------------------------------25-31
5. Cloud server Instruction-------------------------------------------32-41
6. LinkEazi APP instruction-------------------------------------------42-50
Appendix------------------------------------------------------------------51-54
Policies and disclaim---------------------------------------------------55-56
CE Caution----------------------------------------------------------------57
Warranty Card-----------------------------------------------------------58
3
1. Device introduction
How HomeGuard works
HomeGuard can connect to your WIFI network, with our cloud server, it
become convenient to be browsed or controlled by PC or Phone
4
Homeguard can be used in
Domestic implementation for security
purpose, Private property scrutiny, Hunting observation, Scout
game...
Or any more interesting way you find out, just share your
amazing experience with your friend
Scenario suggestions
Any question? Just visit our website, send your feedback at FAQ tab:
http://www.linckeazi.com
5
1.WiFi antenna
2.IR flash LED
3.Lens
4.PIR sensor
5.Power switch
6.Keyboard
7.Light sensor
8.HD TFT screen
9.Eject button
Camera Components
6
Specification 1
7
Specification 2
8
Preparation:
Register device
to cloud server, so
sync/mobile phone
support/PC browser support
become available
Visit our cloud server:
https://www.linckeazi.com
2. Quick Guide
9
Login your cloud account, at ‘PERDONAL PAGE’ click ‘Add
device’ button, fill SN/IMEI/ID (labeled at package) of your devices
Give your device a name
and Location description
can help to remind you
to pick the right one
among several devices
After added your device, it
will show up at the button
10
You can add more than one Wifi camera, and click the below button,
camera status will unfold
After successfully register the devices to cloud server, your devices will
show up
11
Set up
Installing the batteries and SD card
MAX 32GB
We recommend you fill 12 AA batteries for long time usage
Notice: Spring side always be negative, use
the same brand battery
Push Eject button, it will pop out battery case, which can hold 12 set of
AA batteries (with 8 at top, and 4 at bottom) After installed batteries,
push the battery case into camera. Slide the switch to SETUP position,
screen will light up afterwards
12
Camera main panel symbol instruction
Slide to SETUP
Screen will light up
After camera switch to SETUP, the screen will show the Main Panel
as below:
13
Connect to WiFi network
Press MENU after camera boot up, scroll down NET tab and press OK
to enter WiFi Connect, it will search available WiFi, select
‘UOVLINK’ (default name is UOV+3 random number, password:
87654321), press OK button to input password, click Join after finished
password
14
Send a test photo:
1) Press the SHOT button, camera will catch a photo
2) Press the OK button, to Playback the photo you just taken
3) Press the MENU button you will see the following screen
4) Navigate with the ▼button, select the SEND bar and press
When the photo has been sent, it will show up at ‘Today’ button promptly in
your cloud account(web-portal), click the below button to view your newest
15
Mount up devices
Slide to SETUP
Take the camera walking through the places you want to mount,
and Test Mode will inform you the signal status
After camera boot up, press MENU find Test
Mode and press OK, it will display the WiFi
signal status, you can start to find a place to
mount camera
16
When the Green LED lights off, it means the WiFi signal strength is
not enough for transmitting HD photo &video, take few steps back
to host device till the Green LED light on, mount camera
Red LED means in setup mode
Green LED indicates signal strength
17
Mount up tips
After you select an appropriate place to mount camera, slide switch to
ON, the Red LED will flash 30 seconds then it will start working.
Set appropriate distance, height, angle, device settings and power strategy
will make a difference between good to excellent, here some tricks for
reference
18
Camera Button instruction
Buttons Only Available in SETUP MODE. Assume all the operation start
at main panel
MENU button: Entry and Exit of main menu. Also used as an Exit in
deeper menu structure, often used with OK button
Press
Hit once
Hit twice
Press
OK button:
1.Entry and Exit of playback
2.confirm an operation
3.Enter a tab
Loading...