UNV DC4304, DC4308 Quick Manual

Video Decoders

Quick Guide

Manual Version: V1.00

Thank you for purchasing our product. If there are any questions, or
requests, please do not hesitate to contact the dealer.

Copyright

Copyright 2014-2015 Zhejiang Uniview Technologies Co., Ltd. All rights
reserved. No part of this manual may be copied, reproduced, translated,
or distributed in any form or by any means without prior consent in
writing from our company.

Trademark Acknowledgement

and other Uniview’s trademarks and logos are the property of

Zhejiang Uniview Technologies Co., Ltd. Other trademarks, company
names and product names contained in this manual are the property of
their respective owners.

Disclaimer

CAUTION!

The default password is used for your first login. To ensure account
security, please change the password after your first login. You are
recommended to set a strong password (no less than eight characters).

 To the maximum extent permitted by applicable law, the product

described, with its hardware, software, firmware and documents, is
provided on an "as is" basis.

 Best effort has been made to verify the integrity and correctness of

the contents in this manual, but no statement, information, or
recommendation in this manual shall constitute formal guarantee
of any kind, expressed or implied. We shall not be held responsible
for any technical or typographical errors in this manual. The

contents of this manual are subject to change without prior notice.
Update will be added to the new version of this manual.

 Use of this manual and the product and the subsequent result shall

be entirely on the user's own responsibility. In no event shall we be
reliable to you for any special, consequential, incidental, or indirect
damages, including, among others, damages for loss of business
profits, business interruption, or loss of data or documentation, or
product malfunction or information leakage caused by cyber attack,
hacking or virus in connection with the use of this product.

 Video and audio surveillance can be regulated by laws that vary

from country to country. Check the law in your local region before
using this product for surveillance purposes. We shall not be held
responsible for any consequences resulting from illegal operations
of the device.

 The illustrations in this manual are for reference only and may vary

depending on the version or model. The screenshots in this manual
may have been customized to meet specific requirements and user
preferences. As a result, some of the examples and functions
featured may differ from those displayed on your monitor.

 This manual is a guide for multiple product models and so it is not

intended for any specific product.

 Due to uncertainties such as physical environment, discrepancy

may exist between the actual values and reference values provided
in this manual. The ultimate right to interpretation resides in our
company.

Environmental Protection

This product has been designed to comply with the requirements on
environmental protection. For the proper storage, use and disposal of
this product, national laws and regulations must be observed.

Safety and Compliance Information

Safety Symbols

The symbols in the following table may be found on installation-related
equipment. Be aware of the situations indicated and take necessary
safety precautions during equipment installation and maintenance.

Symbol

Description

Generic alarm symbol: To suggest a general safety
concern.

ESD protection symbol: To suggest
electrostatic-sensitive equipment.

Electric shock symbol: To suggest a danger of high
voltage.

The symbols in the following table may be found in this manual.
Carefully follow the instructions indicated by the symbols to avoid
hazardous situations and use the product properly.

Symbol

Description

WARNING!

Indicates a hazardous situation which, if not
avoided, could result in bodily injury or death.

CAUTION!

Indicates a situation which, if not avoided, could
result in damage, data loss or malfunction to
product.

NOTE!

Indicates useful or supplemental information
about the use of product.

Safety Information

Installation and removal of the unit and its accessories must be carried
out by qualified personnel. Please read all of the safety instructions
below before installation and operation.

 This device is a class A product and may cause radio interference.

Take measures if necessary.

 While shipping, the device should be packed in its original packing.

 Verify that installation is correct. Incorrect cable connection may

cause personal injury or device damage.

 The installation must be made by qualified personnel and should

conform to all the local codes.

 If the product does not work properly, please contact your dealer.

Never attempt to disassemble the device yourself. We shall not
assume any responsibility for problems caused by unauthorized
repair or maintenance.

 Ensure a proper operating environment, including temperature,

humidity, ventilation and power supply. Make sure the device is
properly grounded and the lightning protection meets
requirements. Keep the device from moisture, dust, strong
electromagnetic radiation and vibration.

 Power down the device before connecting and disconnecting

accessories and peripherals.

 Protect the power cable from being stepped on or pressed,

particularly at the plug, receptacle, and the part leading out of the
device.

 Strictly follow the procedure to shut down the device. Sudden

power failures can cause disk damage and functional abnormalities.
In an environment where power supply is frequently interrupted,
use an Uninterrupted Power Supply (UPS).

 Improper use or replacement of the battery may result in hazard of

explosion. Use the manufacturer recommended battery.

 Take necessary measures to ensure data security and protect the

device from network attack and hacking (when connected to
Internet). Possible risks and consequences are at user's sole
discretion.

WARNING!

 Never look at the transmit laser while the power is on. Never look

directly at the fiber ports and the fiber cable ends when they are
powered on.

 Use of controls or adjustments to the performance or procedures

other than those specified herein may result in hazardous laser
emissions.

Regulatory Compliance

FCC Part 15

This equipment has been tested and found to comply with the limits for
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his
own expense.

This product complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

LVD/EMC Directive

This product complies with the European Low Voltage Directive
2006/95/EC and EMC Directive 2004/108/EC.

WEEE Directive–2002/96/EC

The product this manual refers to is covered by the Waste Electrical &
Electronic Equipment (WEEE) Directive and must be disposed of in a
responsible manner.

i

Contents

1 Overview .............................................................................................. 1

Appearance ................................................................................................... 1

LEDs ............................................................................................................... 2

Main Ports ..................................................................................................... 3

2 Installing the Device ............................................................................. 5

Preparation ................................................................................................... 5

Checking the Device Package ............................................................... 5

Checking the Installation Environment................................................. 5

Cable Requirements ............................................................................. 6

Installation Flow Chart .................................................................................. 8

Installing the Device in a Rack ..................................................................... 10

Preparing for the Installation.............................................................. 10

Installing the Mounting Brackets ........................................................ 10

Installing the Device in the Rack ......................................................... 11

Verifying the Installation .................................................................... 12

Installing the Device on a Workbench ........................................................ 13

Preparation for the Installation .......................................................... 13

Installation Procedure ........................................................................ 13

Connecting Cables ....................................................................................... 13

Cabling Requirements ........................................................................ 13

Example for Connecting Cables .......................................................... 14

Connecting the Ground Wire .............................................................. 15

Connecting the Audio Cables and Alarm Cables ................................. 17

Connecting video cables ..................................................................... 19

Connecting Network Cables ............................................................... 19

Connecting the AC Power Cord .......................................................... 19

ii

Connecting RS-232 Serial Cables ........................................................ 21

Connecting a Third-Party Device ........................................................ 21

Verifying the Installation ............................................................................. 21

Starting Up the Device ................................................................................ 21

3 Logging In to and Out of the Device ..................................................... 22

4 Technical Specifications ...................................................................... 22

1

1 Overview

NOTE!

This manual describes the device hardware information and installation
procedure, and guides you through logging into the Web interface.

This series video decoders (referred to as device in this manual) are new

generation HD network video decoder terminals. The device is designed

for remote video surveillance and can be widely applied in various

real-time surveillance applications for monitoring audios and videos

remotely in real time.

For information about the technical specifications of the device, see

Technical Specifications.

Appearance

Figure 1-1 Front view

1: RUN LED

2: NET1
LED

3: DEC
LED

4: Alarm
LED

5: NET2 LED

1

2

3

4

5