Uniz Slash OL, Slash Series, Slash PLUS, Slash PRO OL, Slash PLUS UDP User Manual

...
USER MANUAL
APPLICABLE TO
SLASH OL/SLASH PLUS/SLASH PLUS UDP
SLASH PRO OL/SLASH PRO/SLASH PRO UDP
SLASH J UDP/SLASH DJ2
UNIZ DESKTOP 3D PRINTER
DISCLAIMER
P
in order to operate the device smoothly, efficiently and safely.
The conditions or methods used for assembling, handling, storage, use or disposal of the device are beyond the control of UNIZ Technology LLC. For this and other reasons, UNIZ does not assume responsibility and expressly disclaim liability for loss, injuries, damage, or expense arising out of or in any way connected with the assembly, handling, storage, use or disposal of the product.
The information in this document was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness.
the manual may lead to personal injury, inferior results or damage to the SLASH. All users who operate the Slash are expected to understand the contents of the manual
CONTENTS
A
B
C
WELCOME
DESIGN RULES
D
SLASH SERIES 3D PRINTER DESIGN RULE
SETTING UP YOUR PRINTER
UNBOXING
PRODUCT DESCRIPTION
SLASH PRINTER TYPES
ACTION BUTTON COLOR GUIDE
PRINTER ACTIVATE AND UPGRADE
UNIZ SOFTWARE USER MANUAL
···········································02
·····················01
························04
····························06
·············07
·········18
TROUBLE SHOOTING
E
TROUBLE SHOOTING
ROHS AUTHENTICATION
F
ROHS AUTHENTICATION
APPENDIX
G
SOFTWARE INTERFACE
START YOUR FIRST PRINTING JOB
ADDITIONAL TOOLS
··························17
··········19
·······························32
TECHNICAL SPECIFICATIONS
·······································33
·····························34
························42
··················43
WELCOME
A
SLASH SERIES 3D PRINTER
his user manual is designed to help you start your SLASH series 3D printer
T
great quality prints.
You might be familiar with other types of 3D printers. Regardless, it is still essential that you read this manual carefully in order to make the most out of your SLASH printer.
experience. Learn everything about using your SLASH 3D printer by following the instructions in this user manual and experience how easy it is to produce
01
Federal
Communications
Commission
Conformite
Europeenne
SETTING UP YOUR
B
UNBOXING
The SLASH comes in reusable, durable packaging that has been specially designed to protect your SLASH in transport. To properly unpack your SLASH, please follow the steps described below.
START UNBOXING
Start unpacking by correctly orienting the cardboard box, then slide the foam packaging out of the box by pulling the cardboard handle beneath the printer while holding the box.
PRINTER
UNBOXING
OPEN IT UP
On the foam packaging, you will find the Quick Start Guide and accessories.
REMOVE THE FOAM PACKAGING
In the foam part on top of your SLASH, you will find all accessories of your SLASH. Take these out and put them aside. Open up the package by removing the foam wrap at the middle. Now you can take out the SLASH and place it on your desk. Make sure you hold the SLASH by the aluminium casing while carrying it.
REMOVING PROTECTION
There is some packaging material around the machine. You may remove it.Then, your SLASH is ready for use!
02
PACKING LIST
Supplied with your package is the UNIZ desktop 3D printer and several other accessories. This is everything you need to start printing. Check if all accessories are included before continuing.
UNIZ Desktop 3D Printer
A .
Power Adapter x 2
B .
Power Cable x 2
C .
USB Cable
D .
Resin Tank
E .
Building Platform
F .
Resin Bottle
G .
Power Combiner
H .
Cleaning Bottle
I .
03
PRODUCT DESCRIPTION
04
05
SLASH PRINTER TYPES
You can identify the printer’s type by checking the label underneath the printer and on the box.
06
ACTION BUTTON COLOR GUIDE
Breathing red
Printer busy (starting up/paused/z axis moving)
Progressing blue
Data transfer in progress
Green
STANDBY-The printer is connected and waits for a command.
Breathing green
Data transferred, waiting for touch confirmation.
Progressing green
Printing in progress-The lights indicate completed progress.
07
PRINTER ACTIVATE AND UPGRADE
1. Printer Network
Check if the printer is connected to the Internet and set up for the printer connection.
Note:
The Printer's Wi-Fi feature supports 2.4GHz band only, it does not support 5 GHz connections.
Method 1: UNIZ Desktop
1. Plug into a power supply and switch on the printer.
2. Connect the printer and PC via USB and start the software.
3. Select the printer in the list to open the printer control interface.
4. View network status
Press the “Printer Settings” button open the submenu. The first item is the Network which shows the connection status.
configued.
configured
Wi-Fi Disconnected means the current Wi-Fi is not connected and needs to be
Wi-Fi Name means the current Wi-Fi is connected.
Ethernet Disconnected means the current Ethernet is not connected and needs to be
Ethernet Connected means the current Ethernet is connected.
08
5. Set up the network
This function only supports setting via USB connection.
Click the first item. The Wi-Fi list will pop up in the left if it is Wi-Fi connection;
Click the Wi-Fi name on Wi-Fi list configure the IP address settings.
In the box you can enter password and obtain IP address automatically or set fixed IP address manually.
Click the first item. The IP address settings should pop up if you are connected via Ethernet.
(software should be 1.2.0 or higher version and firmware should be 4.1 or higher version).
In the box you can obtain IP address automatically or set fixed IP address manually.
09
Method webpage·
1. Plug into a power supply and switch on the printer.
2. Connect to the printer's Wi-Fi hotspot. a. Find the SSID and Password on the side label. b. Access the Wi-Fi Setting of your mobile device, and connect to UNIZ3D##:##:##:##:##:## as shown in the SSID.
3. Check and Set Network. a. Find IP address on the side label.
b. Open the browser on PC or mobile device and enter the IP address; open the printer page and select the "Network" option.
10
c. Click Check Network to check if the printer is connected to your network. d. If the printer is not connected to the Internet, please choose your home Wi-Fi hotspot, type in the password and click the Connect button. e. After the printer is connected to your home Wi-Fi hotspot and Internet, disconnect your PC or mobile device from the printer Wi-Fi and reconnect to home or office network.
Tips:
After setting up the connection, please make sure that PC or mobile device and printer are connected to the same LAN to ensure that PC or mobile phone can control the printer through the network.
2. Activate the printer
Before activation, make sure that the printer is powered on and connected to the network. Slash OL or SLASH PRO OL models must be activated before printing. After successful activation, the printer will automatically launch a seven-day trial period in which the SLASH OL/PRO OL will become and function as a SLASH PLUS UDP/SLASH PRO UDP.
Method 1: UNIZ Desktop
a. Start the UNIZ Desktop and select the printer in the list to open the printer control interface b. Click the “Printer Settings” button to open the submenu. The second option shows the activation status c. Click the item to execute the activation function. If the printer is inactivated, clicking this item will activate the printer and the system will bind the printer to the currently logged-in user.
Method 2: UNIZ App
Printer activation is supported by UNIZ App of 1.2.0 or higher. a. Click the "Printer" button in the main menu of App, find the printer that needs to be activated in the list of printers, and open the printer control panel. b. Click the "Utilities" button on the control interface to enter the setting interface. The third item is the activation function, showing the activation status ("Inactivated "or" Activated "). c. Click “Inactivated”/ “Activated” to activate/reactivate the printer with the current login account.
11
Method 3: Activate from the webpage
a. Connect the PC or mobile device to the printer’s Wi-Fi and open the printer page in the browser. b. Select the Activation tab in the printer page and input UNIZ account and password, then click the Activate to complete the activation.
Network
Activation
Upgrade
3. Updating the Firmwaret
Before upgrading the firmware, make sure that the printer is powered on and is connected to the internet.
Method 1: Upgrade from the UNIZ Desktop
a. Launch the software and select the printer to open the printer control interfacet. b. An icon will show next to the firmware version when there is a new version available. available. Click the icon to start upgrading. Restart the printer when the upgrade is finished.
Method 2: Upgrade from the UNIZ App
(1) Check the firmware version of the current printer Click "Printer" in the main menu of App, find the printer that needs to be updated in the list of printers, open the printer control panel, click the "Utilities" button, and you can see the current firmware version in the window. (2) Updating the firmware An icon “New” will show next to the firmware version when there is new version firmware available. Click the icon to start upgrading. Restart the printer when the upgrade is finished.
12
Method 4: Upgrade from the webpage
a. Connect the PC or mobile device to the printer Wi-Fi and open the printer page in the browser. b. Select the Upgrade tab in the printer page and click Upgrade firmware to start the printer firmware updated. Restart the printer after the upgrade is complete.
Network Activation
Upgrade
4. Upgrading the Printer License
Before Upgrading the license, make sure that the printer is powered on and is connected to the network.t Software Requirements: UNIZ APP 1.2 or higher UNIZ Desktop 1.2 or higher Printer Firmware 4.0 or higher SLASH OL and SLASH PRO OL support license upgrades. The printer type will change as follows: SLASH OL -> SLASH PLUS UDP SLASH PRO -> SLASH PRO UDP (1) You can purchase license upgrades from the online store by visiting official website https:// www.uniz.com. (2) Click My Printer in the left menu of the Dashboard from the website to show the activated printers under the current username and choose the one that needs to be upgraded. Select the purchased license in the Upgrade License list and click Upgrade to complete the process.
13
Tips:
The printer will be shown only when activated with the current account.
(3)License upgrades can be executed in the UNIZ App or the UNIZ Desktop printer control interface.
●UNIZ Desktop
a. From the ‘connected printers menu’ in the top right, select the printer in the list of printers, and open the printer control interface. b. Click the "Upgrade License" button below If the user has not purchased the license or if the printer and the license have not been bound, the system will display a notification that directs to the purchasing webpage. If the printer and the license have been bound, the system will start the upgrading process. Please restart the printer manually after the upgrade is complete. The printer model should change upon the next power up.
●UNIZ App
a. Click the "Printer" button in the main menu the app, select the corresponding printer in the list of printers, open the printer details control panel, click the "Utilities" button, and the “Upgrade License” option can be seen in the window. b. Click the “Upgrade License” option If the user has not purchased the license or if the printer and the license have not been bound, the system will link to the corresponding license purchasing webpage or remind the user to go Dashboard for binding; If the printer and the license have been bound, the system will start the upgrading.
Please restart the printer manually after upgrade is complete and the printer model will shift into the upgraded model.
14
Loading...
+ 37 hidden pages