The Switch you purchased contains following items
You can toggle switch to decide whether to use Extend or not (Note: After toggling the
switch, you need to reboot the device to enable or disable this function):
ON: Extend mode is enabled. All downlink ports are separated, and the network
transmission distance is extended to 250 meters.
OFF: Extend mode is disabled (switch to standard switching mode). All ports can
communicate with each other.
Item
Name
Quantity
Unit
1
Switch
1
Set
2
Power Adapter
1
Piece
3
Power cable
1
Piece
4
Plastic-foot
4
Piece
5
Quick Installation Guide
1
Piece
● Unplug power before cleaning. Do not wipe the switch with wet cloth. Do not clean
● Keep the switch away from water or damp. Protect against ingress of water or damp.
● Keep a clean environment. Buildup of dust causes electrostatic absorption and leads to
● Keep clear ventilation. Do not stack devices. The switch uses natural cooling to
● Verify that the input voltage conforms to specifications.
● Please don't plug in and pull out the DC plug when power turns on, we suggest that you
● To avoid the risk of electric shock, never open the chassis when the switch is still
To realize the safe installation and operation,
we suggest you:
A. The mounting surface is capable of supporting at
B. The main power outlet is at least one meter away
C. The power cable is securely connected to the outlet.
D. Allow sufficient space for heat dissipation, and no
LED
Panel
Status
Meaning
Power LED
PWR
Green
Power connected
Off
Power disconnected or power failure
Status LED
Link/Act
Green
Link established
Flashing
Sending/receiving data
Off
No link
POE LED
POE Status
Orange
Supplying power
Off
Not supplying power
with liquid.
shortened lifetime and malfunction.
dissipate heat.
insert DC plug fist, then insert the AC power socket
operating. Open with caution even when power is not applied.
least 1 KG weight.
from the switch.
heavy object is placed on the switch.
Installed on desktop
1. Verify that the power supply complies with the specifications marked on the switch.
2. Connect the power adapter to the DC interface of the switch first, and then connect the
3. Check that the PWR indicator on the switch is lit, which means power is connected
● This device is a class A product and may cause radio interference, Take measures if
Items Specification Description
Dimensions
(L x W x H)
235*110*27mm
Fixed Port
● 8×10/100Base-TX auto-sensing Ethernet PoE ports
● 1×Gigabit combo uplink port (SFP (default)and RJ45)
Cable type
● 10Base-T: Cat 3/4/5 UTP, maximum transmission distance: 100m.
● 100Base-TX: Cat 5/6 UTP, maximum transmission distance: 100m.
● 1000Base-T: Cat 5/6 UTP, maximum transmission distance: 100m.
● 1000Base-SX: 62.5μm/50μm multimode fiber, maximum
transmission distance: 550m.
● 1000Base-LX: 62.5μm/50μm multimode fiber, maximum
transmission distance: 550m. 10μm single-mode fiber, maximum
transmission distance: 5000m.
Input voltage
DC 54V
PoE Power
Port: Max 30 W.
Total: Max 120 W.
Operating temperature
0℃～40℃
Operating humidity
5%～95%, non-condensing
Heat dissipation
Natural Cooling
power adapter to the mains.
correctly.
necessary.
● This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and ( 2) this device
must accept any interference received, including interference that may cause undesired
operation.
Loading...