Uniview IPC3635ER3-DUPZ, IPC3634ER3-DPZ28, IPC3238SR3-DVPZ, IPC3235ER3-DUVZ, IPC2325EBR5-DUPZ Quick Start Guide

Network Mini Dome Cameras

Quick Guide

Manual Version: V1.01

Thank you for purchasing our product. If there are any questions,
or requests, please do not hesitate to contact the dealer.

Copyright

Copyright 2015 Zhejiang Uniview Technologies Co., Ltd. All rights
reserved. No part of this manual may be copied, reproduced,
translated, or distributed in any form or by any means without
prior consent in writing from our company.

Trademark Acknowledgement

and other Uniview’s trademarks and logos are the

property of Zhejiang Uniview Technologies Co., Ltd. Other
trademarks, company names and product names contained in this
manual are the property of their respective owners.

Disclaimer

The default password is used for your first login. To ensure
account security, please change the password after your first
login. You are recommended to set a strong password (no
less than eight characters).

 To the maximum extent permitted by applicable law, the

product described, with its hardware, software, firmware
and documents, is provided on an "as is" basis.

 Best effort has been made to verify the integrity and

correctness of the contents in this manual, but no statement,
information, or recommendation in this manual shall
constitute formal guarantee of any kind, expressed or
implied. We shall not be held responsible for any technical or
typographical errors in this manual. The contents of this
manual are subject to change without prior notice. Update
will be added to the new version of this manual.

 Use of this manual and product and the subsequent result

shall be entirely on your own responsibility. In no event shall
we be reliable to you for any special, consequential,
incidental, or indirect damages, including, among others,
damages for loss of business profits, business interruption,
or loss of data or documentation, or product malfunction or

information leakage caused by cyber attack, hacking or virus
in connection with the use of this product.

 Video and audio surveillance can be regulated by laws that

vary from country to country. Check the law in your local
region before using this product for surveillance purposes.
We shall not be held responsible for any consequences
resulting from illegal operations of the device.

 The illustrations in this manual are for reference only and

may vary depending on the version or model. As a result,
some of the examples and functions featured may differ
from those displayed on your monitor.

 This manual is a guide for multiple product models and so it

is not intended for any specific product.

 Due to uncertainties such as physical environment,

discrepancy may exist between the actual values and
reference values provided in this manual. The ultimate right
to interpretation resides in our company.

Environmental Protection

This product has been designed to comply with the requirements
on environmental protection. For the proper storage, use and
disposal of this product, national laws and regulations must be
observed.

Safety and Compliance Information

Symbol

Description

Generic alarm symbol: To suggest a general safety
concern.

ESD protection symbol: To suggest
electrostatic-sensitive equipment.

Electric shock symbol: To suggest a danger of high
voltage.

Symbol

Description

WARNING! Indicates a hazardous situation which, if

not avoided, could result in bodily injury or death.

CAUTION! Indicates a situation which, if not
avoided, could result in damage, data loss or

Safety Symbols

The symbols in the following table may be found on
installation-related equipment. Be aware of the situations
indicated and take necessary safety precautions during
equipment installation and maintenance.

The symbols in the following table may be found in this manual.
Carefully follow the instructions indicated by the symbols to avoid
hazardous situations and use the product properly.

Symbol

Description

malfunction to product.

NOTE! Indicates useful or supplemental information
about the use of product.

Safety Information

Installation and removal of the unit and its accessories must be
carried out by qualified personnel. Please read all of the safety
instructions below before installation and operation.

Installation

 This device is a class A product and may cause radio

interference. Take measures if necessary.

 If the product does not work properly, please contact your

dealer. Never attempt to disassemble the camera yourself.
(We shall not assume any responsibility for problems caused
by unauthorized repair or maintenance.)

 Make sure the power supply voltage is correct before using

the camera. Use a power adapter or a PoE device that meets
requirements. Otherwise, the camera may be damaged.

 Do not drop the camera or subject it to physical shock.
 Do not touch sensor modules with fingers. If cleaning is

necessary, use a clean cloth with a bit of ethanol and wipe it

gently. If the camera will not be used for an extended period
of time, put on the lens cap to protect the sensor from dirt.

 Do not aim the camera lens at the strong light such as sun or

incandescent lamp. The strong light can cause fatal damage
to the camera.

 The sensor may be burned out by a laser beam, so when any

laser equipment is being used, make sure that the surface of
the sensor not be exposed to the laser beam.

 Make sure the camera operates in an environment where

the temperature and humidity meet requirements. Keep the
camera from excessive pressure, vibration, moisture, dust,
and intensive electromagnetic radiation.

 Keep the length of the power cord between the power

adapter and the camera within 1.5 meters, otherwise, the
power voltage on the camera may be lowered and may
cause exception.

 Disconnect power before you move the camera. The camera

is powered on when the power cord is connected to the
power source. Do not move the camera by lifting the tail
cable.

 Do not cut the tail cable. Exposed tail cables may cause short

circuit and damage the camera.

 Use the power cable connector delivered with the camera.

Make sure the connector is in good condition (clip) and
secured into place. Do not fully stretch the power cord,
otherwise, the connector may be loose or disconnected due
to vibration or shake.

 Use waterproof tape to protect the end of the tail cable.

Keep the tail cable from water.

 When cleaning the camera, wipe the surface using clean and

soft cloth dipped with alcohol. When cleaning the lens, use
small amount of neutral detergent. Do not use thinner or
benzene.

Maintenance

 If there is dust on the front glass surface, remove the dust

gently using an oil-free brush or a rubber dust blowing ball.

 If there is grease or a dust stain on the front glass surface,

clean the glass surface gently from the center outward using
anti-static gloves or an oil-free cloth. If the grease or the
stain still cannot be removed, use anti-static gloves or an
oil-free cloth dipped with detergent and clean the glass
surface gently until it is removed.

 Do not use organic solvents, such as benzene or ethanol

when cleaning the front glass surface.

 Never look at the transmit laser while the power is on.

Never look directly at the fiber ports and the fiber
cable ends when they are powered on.

 Use of controls or adjustments to the performance or

procedures other than those specified herein may
result in hazardous laser emissions.

Regulatory Compliance

FCC Part 15

This equipment has been tested and found to comply with the
limits for digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful