Univex YB9290 User Manual



Glass Shelf

posts are constructed of

YB92

90BN

–

Glass Shelf

Cleaning Instructions:

ove each mounting post from the body by loosening the setscrew.

make sure that the base set screw hole(s) are facing down. Assemble

Stock Number:

______________________Glass Shelf

Materials:

Ins

tallation Instructions:

Dimensions:

ass Shelf

9290

Fina™ Technical Specification

Stock Numbers:

Brushed Nickel Finish

q YB9290CH – Glass Shelf

Chrome Finish

zinc. Shelf is tempered glass.

1. Position the mounting template on the wall in the desired location. Using a level, align the template and tape it to the wall.

2. Rem

3. Place each mounting post on the template with notch facing down.

4. Mark the 2 large hole locations of each mounting bracket.

5. Attach each mounting bracket to the wall, using the wall anchors provided

6. Mount each base on the corresponding mounting bracket. Check and a set screw to each base. Use the allen wrench included in hardware

kit to tighten each set screw and secure the assembly to the mounting bracket(s).

7. Tighten all 4 screws. Do not over tighten.

8. Assemble glass to each post with glass shelf between both washers and finished cap.

9. Place each post over the mounting plate with setscrew down. Tighten both setscrews.

To preserve the fine finish of this product, clean only with a soft damp cloth. Dry well. Do not use commercial or abrasive cleaners.

By Creative Specialties

25300 AL MOEN DRIVE •NORTH OLMSTED, OH 44070 CORPORATE HEADQUARTERS: (800) 321-8809 • FAX: (800) 848-6636 INTERNATIONAL: (440) 962-2000 • FAX: (440) 962-2726 CUSTOMER SERVICE (USA): 800-882-0116 • FAX: (888) 379-2720 WWW.CSI.MOEN.COM