Univex 1406 Specifications

SINCE 1948

Make perfectly shaped patties every time with
the Univex PattyPress™ burger mold. This sturdy,
easily operated design quickly produces
uniform hamburgers, crabcakes, fishcakes
or veggie-burgers. Better still, even thickness
ensures more uniform cooking from edge
to center for a delectable result.

Simply load ground meat or mixture into
the mold, then pull the ergonomically
designed handle to activate the press.
Presto! Another perfectly sized patty is
ready in seconds.

For hefty portions, choose Model 1406,
which molds up to 16 oz. into 6-inch
diameter patties. Model 1405 molds up
to 8 oz. into 5-inch patties. Model 1404
molds up to 5 oz. into 4-inch patties.
Thickness is determined by the quantity
placed in the press.

Made of polished, die-cast
aluminum and stainless steel, the
PattyPress is engineered for years of
reliable service. For convenience in storing
finished patties, an integral receptacle holds a
stack of waxed paper. Your PattyPress unit comes with a supply
of waxed paper dividers, and these are available in bulk from
Univex.

1404,1405,1406

1404,1405,1406

H E AV Y- D U T Y C O M M E R C I AL U SE

4

”

,5

”

&

6

”

April 2005

Printed in USA

UNIVEX CORPORATION■3 Old Rockingham Road■Salem, NH 03079-2140

Tel [phone] ■Fax [phone]

TOLL-FREE ORDERING FAX [phone]

www.univexcorp.com

■

Replaces flimsy, awkward
hand presses with a rugged,
counter-top machine.

■

Uniform patty size–choose
4-inch, 5-inch or 6-inch
diameter model

■

Uniform

thickness for

even cooking,

better results

■

Single-lever manual oper­ation takes only seconds

■

Rugged, die-cast aluminum
and stainless steel
construction

■

Integral holder for wax paper

P

ATTY PRESS

™

B E N C H T O P B U R G E R M O L D S

6-inch extra-large
patty size!!

NEW

Our main ingredient is value

WA R R A N T Y

E A S Y O P E R AT I O N

FINISH

Anodized aluminum and stainless steel

PATTY SIZE

MODEL 1404 4-inch (102 mm) diameter– up to 5 oz. (140g)
MODEL 1405 5-inch (127 mm) diameter– up to 8 oz. (225g)
MODEL 1406 6-inch (152 mm) diameter– up to 16 oz. (450g)

SUPPLIED WITH

1000 waxed paper dividers

OPTIONAL SUPPLY

Waxed paper dividers in bulk (5000 per case)

H E AV Y- D U T Y C O M M E R C I AL U SE

1404,1405,1406

S P E C I FI C AT IO N S

1404,1405,1406

April 2005

Printed in USA

4”,5”
&6”

PATTY

PRESS

™

B E N C H T O P B U R G E R M O L D S

Models 1404 & 1405 Model 1406

NET WEIGHT: 11 lb. (5 kg) 12 lb. (5.4 kg)
SHIPPING WEIGHT: 13 lb. (6 kg) 14 lb. (6.4 kg)
BOX DIMENSIONS: 11” (280 mm) high

10” (254 mm) wide
10 1/2” (267 mm) deep

UNIVEX CORPORATION

■

3 Old Rockingham Road ■Salem, NH 03079-2140

Tel [phone] ■Fax [phone]

TOLL-FREE ORDERING FAX [phone]

www.univexcorp.com

3. Return handle to the rear.

Press plate rises automati­cally for easy removal.

1. Push handle all the way
back. Place ball of meat or
mix on bottom press plate.

2. Press release button to
lower press plate into
forming dish. Pull handle
forward and apply light
pressure.

The Univex PattyPressTMBurger Mold is warranted by Univex Corporation against defects in materials for a period of six months from date of delivery if delivered to a destination in the
United States. The unit must be returned to Univex for warranty repairs. Contact Univex Service Department to report any warranty claim. Univex shall not be liable for any consequential,
compensatory, incidental or special damages. Damages incurred in transit or from installation error, accident, alteration or misuse are not covered. Transit damages should be reported to
the carrier immediately.

If the PattyPress is delivered to a country other than the United States, it is warranted by Univex’s authorized distributor. Contact your distributor directly to report any warranty claims
outside of the United States or Canada.

SINCE 1948