Exacting Standards, Just Like yours, since 1948
Signature Series
™ Slicer
1000S
Dimensions:
A Overall width: 24” (610mm)
B Overall length: 27” (686mm)
C Overall height: 25” (635mm)
Width with carriage
tilted for cleaning: 33” (838mm)
Footprint: 18” wide X 22” long
(457mm X 560mm)
Required operating 37’ wide X 33” deep
area: (940mm X 838mm)
Shipping Information:
Freight Class: 85
Net Weight: 110lb. (50kg)
Shipping Weight: 163lb. (74kg)
Shipping Box dimensions:
Height: 32” (813mm)
Width: 35” (889mm)
length: 29” (737mm)
Cubic Measure: 18.8 ft
3
Slice Thickness:
Infinitely variable, 0 to 0.9” (23mm).
Max Product Size:
5 1/2” high (140mm) by
11” wide(279mm).
Electrical:
115/60/1. Cord supplied. Contact
factory for availability of special
voltages. Power on indicator light.
Motor:
1/2 hp, 2.5 amp draw.
Blade:
13” (33cm) diameter German made
hollow ground, chrome plated, high
carbon steel.
Controls:
Manual or automatic selector lever.
Membrane keypad with switch for
blade and carriage motor, stroke
length, speed selector and slice
count. Slice thickness dial.
Construction:
Ultra-smooth, polished anodize aluminum chassis, support and feed carriages, guage plate, blade guard and
remnant holder.
Electrical Cord:
Six foot, three wire power supply cord and
plug.
Plug not supplied on export models.
Hygiene / Maintenance:
Removable blade guard and remnant
holder. Rear product deflector swivels to
allow easy access for cleaning. Seperate
sharpener mounts in seconds.
Knife Ring Guard:
Permanently mounted knife ring guard
protects the non-slicing portion of the
knife. With the gauge plate completely
closed, the slicer and blade can be
cleaned with zero blade exposure.
No Voltage Release:
Prevents inadvertent reactivation of the
slicer in the event of power interruption.
The operator must restart the slicer.
Indicator Light:
Readily visible light illuminates when
knife is rotating.
Tilting Carriage System:
With the thickness dial set to zero, The
carriage may be tilted back for easy
“in-between” cleaning. The carriage
system interlock does not allow the
gauge plate to be opened with the
carriage tilted of cleaning.
Recommended Maximum Duty:
8 hours per day. No limit to the amount
of cheese.
Optional Accessories:
The following are available at an extra cost:
1000452 Slicer Cover:
Heavy-duty clear plastic cover.
8F2V30014 Vegetable Chute:
Stainless steel vegetable chute for
slicing vegetables.
Diameter: 7” (178mm)
Length: 14” (356mm)
Printed in the USA 10/09
Univex Corporation
www. Univexcorp.com
3
Old Rockingham Rd Salem, NH 03079 USA
Telephone (800) 258-6358 Fax: (800) 356-5614
Intl Tel. (603) 893-6191 Int’l Fax: (603) 893-1249
B
C
A
Slices Per Minute By Speed And Stroke Length
Stroke Length 4.8 inches (122mm) 7.8 inches (198mm) 11 inches (279mm)
Speed 1 42 27 22
Speed 2 53 37 30
Speed 3 54 43 42
Speed 4 54 57 52