Thanks for Purchasing Universe Future Technology Co,.LTD products.
Gateway(ZWG2000AG) which based on z-wave technology is professionally designed
for Internet of Things.It work like a bridge between the internet and the appliance
or the office device,user can remotely control the Light,Curtain Motor,Air
Condition,TV,Projector and so on,via the APP which designed and worked with
gateway,it also can deal with the data which received from sensor ,to support the
smart control.Meanwhile our gateway integrated security system,user can remotely
monitor online via the IP camera,when alarm happen,our system can send message to
user in the first time.Our gateway adopt z-wave technology which is bidirectional
communication,that make it possible to know the status of device anytime,wireless
communication is convenience for constructing,no need wiring.Humanized logic and
User Interface designed make user feel very comfortable when using our products.
Products that are Z-Wave certified can be used and communicate with other Z-Wave
certified devices.
Feature:
• ARM9-S™ ARM® Thumb® Processor running at up to 400 MHz,high quality assurance.
• Modular Design for Hardware,easy for future update and modify.
• Simple Linux kernel for Software system,easy for maintain and APP
Update.
• Support multiple communication protocol:Z-wave,TCP/IP,UPNP,DDNS,
HTTP,DNS.
• Redundant design for the communication between the gateway and control
terminal,make the alarm message send in time.
• Support web for configuration,convenience for setting and modify.
• Internal log file design,safer for fault analyses.
• Separating Reset mode design,user can chose to reset only password or
HomeID or Gateway IP.
• Support Encipher Transmit Mode and non-Encipher Transmit Mode.
• Support TSL between the gateway and terminal.
Universe Future Technology Co.,LTD
4
Introduction of Gateway
2 Diagram
1
23456
7
8
10
9
11
15
131412
Figure 2-1: Gateway
Figure: 2-2 Front
Figure:2-3 Right
Figure: 2-4 Back
Universe Future Technology Co.,LTD
5
Introduction of Gateway
Table 2-1
No.NameFunction
1Power Button and Power LEDPower on/off、Power status
2Download LEDData download status
3Inclusion/Exclusion LEDInclusion/Exclusion status
Ethernet Port LED: On/OrangeEthernet port power on
Ethernet Port LED: On/GreenEthernet port physics link is ok
Ethernet Port LED:Blink/GreenGateway is communicating right now
Down load LED:Blink/GreenGateway is updating new version
Inclusion/Exclusion LED:
Blink/Blue
Inclusion/Exclusion LED:Blink/GreenGateway is on Inclusion mode
Inclusion/Exclusion LED:On/Blue→OffPassword reset(when holding for 10s)
Gateway is on Exclusion mode
Gateway is rebuilding z-wave router
IP reset(when holding for 3s)
Gateway is starting
z-wave LED:Blink/GreenGateway is communication with other device
WAN LED:On/GreenGateway link with Internet OK
WAN LED:Blink/GreenGateway is checking the internet status
WAN LED:OffGateway do not link to Internet
LAN LED:On/GreenPhysical Link between Gateway and router is ok
LAN LED:Blink/GreenGateway is communicating right now(tcp/ip)
LAN LED:OffPhysical Link between Gateway and router is not ok
Universe Future Technology Co.,LTD
7
Introduction of Gateway
5 Installation
The product does not require installation.After breaking package,assembling
antenna,putting gateway on a desk which is 0.8m - 1.0m high,then power on, connecting
to router with network table.
NOTE:
* DO NOT PUT GATEWAY ON THE GROUND OR LOWER PLACE.
* DO NOT USE AC POWER ADAPTER WHICH DO NOT CONFORM TO THE REQUIREMENTS OF PRODUCTS
SPECIFICATION.
* GATEWAY IS A STATIC CONTROLLER WHICH IS NOT PORTABLE,PLEASE DO NOT MOVE IT
AFTER RE-BUILTING ROUTER.
* IT IS BETTER AWAY FROM OTHER RADIO SOURCE.
* RF JIMMING IS NOT PERMIT WHEN USING GATEWAY.
6 Operation
6.1 Power on/off
Power on
Function:power supply,start system
Step:
Step-1:Plug in AC adapter
Step-2:Press power button
(Power LED will turn on with BLUE.After 10s,the Download LED and
Inclusion/Exclusion LED will blink for 13s,then Download LED and
Inclusion/Exclusion LED will turn off,then system is ready)
Power off
Function:power off and shutdown the system
Step:
Step-1:Press power button
(Button will pop-up,then the Power LED will turn on)
6.2 Web Setting
Web Setting
Function:view system setting
Step:
Step-1:Running Browse
Step-2:Input Gateway IP at address field,format is“IP:8080”,for example
“192.168.0.88:8080”,“192.168.0.98”is gateway IP,“8080”is port number.
Universe Future Technology Co.,LTD
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.