Operation Manual
www.universal-space.com
1
CONTENT
Important Safety Instructions ................................................................................. 2
1. SPECIFICATIONS ..................................................................................................... 4
2. PACKAGE CONTENTS .............................................................................................. 5
3. PART NAMES ........................................................................................................... 6
4. SET UP & INSTALLATION ........................................................................................ 7
5. HOW TO PLAY ........................................................................................................ 11
6. GAME OPTION ....................................................................................................... 12
7. MAINTENANCE, INSPECTION ............................................................................... 21
8. OVERALL CONSTRUCTION ................................................................................... 22
2
Thank you for purchasing DINO POP from UNIVERSAL SPACE. We hope you
enjoy the product.
This manual contains valuable information about how to operate and maintain your game
machine properly and safely. It is intended for the owner and/or personnel in charge of
product operation. Carefully read and understand the instructions.
If you need any help during installation and setup please utilize this manual and
troubleshooting guide. If the product fails to function properly, non-technical personnel
should under no circumstance attempt to service the machine. Contact your distributor or
manufacturer for help.
Before use, please read IMPORTANT SAFETY INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
To ensure the safe usage of this product, carefully read and
understand these instructions before operating your game.
Save these instructions for future reference.
Use this product only as described in this manual. Other uses not recommended may cause
fire, electric shock or personal injury. Unplug the game from the outlet when not in use,
when moving from one location to another, and before cleaning/servicing.
Explanations which require special attention are indicated by signs of warning. Depending
on the potential hazardous degree, the terms: NOTE, NOTICE, and WARNING are used.
NOTE: A NOTE indicates useful hints or information about product usage.
NOTICE: A NOTICE indicates potential damage to product and how to avoid the problem.
WARNING: A WARNING indicates a potential for product damage or serious personal Injury.
It is important to understand the meaning of the following HAZARD SIGNS
High Voltage and Shock Hazard:
High voltage can cause electric shock.
Turn of f/unplug power before servicing.
before continuing:
High Temperature Hazard:
This part may cause scalding.
Do not touch. Surface may be hot.
3
No Touching Hazard:
This part may be hot or can cause electric shock.
Do not touch.
Use the following safety guidelines to help ensure your own personal safety and to help
protect your equipment and surrounding environment from potential damage.
This product is an indoor game machine. Do not install outdoors.
Avoid installing in the following places to prevent fire, electric shock, injury and/or
machine malfunctioning:
• Places subject to rain/moisture, or places subject to high humidity.
• Places subject to direct sunlight, or places subject to extremely hot or cold
temperatures to ensure that it is used within the specified operating range.
• Places where inflammable gas may be present or in the vicinity of highly
inflammable/volatile chemicals or items that can easily catch fire
• On unstable or sloped surfaces. The machine may topple or cause unforeseen
accidents.
• Vicinity of fire exits, fire extinguishers etc that may block/prevent safety measures
Note: The contents of this manual may be updated without notice.
WARNING
Non-
technical personnel who do not have technical knowledge and
Expertise should refrain from performing such work that this manual
require or perform tasks which are not explained in this manual.
Failing to comply can cause severe accidents such as electric shock or
other serious injuries.
WARNING: To reduce the risk of fire, electric shock or personal injury,
unplug or disconnect the machine from the power supply before
servicing.
4
1. SPECIFICATIONS
Rated power supply： 110V 50/60Hz
Min. Power consumption: 140W
Max. Power consumption： 160W
Dimensions： W1840×D1000×H2033.8 (mm)
Weight： About 212Kg
NOTICE: After turning off the game, please wait at least 1 minute before
restarting again.
Note: Game parameters are subject to change without notice.
5
2. PACKAGE CONTENTS
Open the package and make sure all the items are included:
• 1 x Body Assembly
• Following accessories
No.
Part No.
Name
Spec.
Qty.
Illustration
Note
1 D107-804-000 AC power 10A/250V 1.8m 1
2 D107-430-000 Fuse
T3A/250V（T6A/125V）
Φ5-20mm
1
Choose by
area
3 D107-728-000 Manual English 1
Choose by
area
4 D107-409-000 Key 171 2
Service door
5 D107-420-000 Key 2222 2
Coin box door
Tot. 7
If any items are found to be missing, please contact your sales representative
for help immediately.
NOTE: Part models are subject to change without notice.
6
3. PART NAMES
FRONT VIEW
REAR VIEW
7
4. SET UP & INSTALLATION
This product is an indoor game machine. Do not install outdoors.
Refer to IMPORTANT SAFETY INSTRUCTIONS (Pg. 3) for places to avoid
Place the unit on a dry level surface
Ventilation openings in the back of the unit must not be obstructed by objects or by wall.
4.1 Play Zone
This machine requires space for playing and for maintenance as shown below.
Leave space around the game upon installation:
Service area： 50cm
Play area： 100cm
安全遮板
8
4.2 Level Adjustment
Install this machine on a flat surface. Adjust levers to lift casters off the ground to level the
game. If the game is installed on an unsuitable floor, it could cause a malfunction.
To fix the game, adjust the Leveler down until it touches the floor, lifting the casters off the
ground by 5mm. Repeat the same for all levelers.
Make sure the machine is level with the ground and all the
adjustable legs should stick to the floor closely.
NOTICE
Leveler
Caster
About 5mm
Move
Fix
9
4.3 Transporting the Game
If you need to move the game, adjust the levelers back to an “up” position so the casters
touch the ground.
NOTICE
• Be careful not to damage the machine during transport.
• The machine should be handled with care when bringing it down from a higher
level.
• Always unplug the game before moving.
• Keep the machine in upright position during transport.
• For longer distance transport, package the game properly to prevent damages
Leveler Caster
Move Fix
10
4.4 Connecting Power
WARNING: Check the voltage rating before you connect the equipment to
an electrical outlet to ensure that the required voltage and frequency match
the available power source. Please refer the label of the machine.
• Do not plug the equipment power cables into an electrical outlet if the power cable is
damaged.
• Avoid putting many loads on one electrical outlet as it could generate heat and fire
resulting from overload.
• Connect the grounding conductor to the earth terminal (GND):
WARNING
Ensure no heavy objects rest on the power cord. Check to make sure the game cabinet does
not sit on the power cord as this could damage the cord and become hazardous.
To disconnect the game, grip the plug and pull it from the wall outlet. Never pull by the cord.
To prevent electric shock, do not touch the power plug when hand is wet.
Ensure that nothing rests on the power cord and that it is not located where it can be
stepped on or tripped over.
11
5. HOW TO PLAY
Dino Pop is a new ball toss game for children and the whole family! This is a simple and fun
game where players toss as many balls as they can into the Dino’s mouth within the time
limit. Tickets are awarded based on the final score.
INSERT COIN(S), BALL WILL BE RELEASED AND GAME WILL START AUTOMATICALLY.
DINO WILL MOVE UP, DOWN, LEFT AND RIGHT. TOSS AS MANY BALLS AS POSSIBLE INTO
THE DINO’S MOUTH TO EARN POINTS.
BEAT THE BONUS SCORE TO WIN THE BONUS
TICKET WILL BE AWARDED BASED ON SCORE.
12
6. GAME OPTION
6.1 Switching Control Signals
Refer to the attached I/O chart and schematics.
To adjust DIP, please refer to the I/O chart. The initial setting is in CAPITAL LETTERS.
Main Board ：
13
TESTING:
Press the TEST button in the main board.
LED Display
BONUS LED<2>3-1 Time LED<1>7-5 Score LED<1>3-1
Testing - Options
Test LED display; normal when it shows< 1.2.3.4.5.6.7.8.>
Press TEST button again and LED displays 1, it shows the LED 1and LED2 of 1# in DIP SW
state.
Press TEST button again and LED displays 2, it shows the number of on-off SW
Press TEST button again and LED displays 3.
Press TEST button and LED displays 4. Hold IN1-40 and it shows OUT1-40 corresponding
lighting output.
Press TEST button again and LED displays 5, it shows OUT1-40 corresponding lighting
output.
ERROR CODES
The following error codes will display if the input signal is not in a normal state when the
game is turned on but continues to operate even with the alarm on.
E01 Ticket Assy. Reset error
E02 Score sensor error
E03 Ball gate sensor error
14
6.2 DIP adjust（Default Setting）
Note: Game parameters are subject to change without notice.
15
6.2 Parameter Settings
DIP Adjust 1（SW1）
（1）Coin(s) per game
Item Content
DIP Adjust（SW1）
Note
1 2
Coin(s) per
game
1
ON
ON
2 off on
3 on off
4 off
off
（2）Game play time
Item Content
DIP Adjust（SW1）
Note
3 4 5
Game play time
30 on
on on
35 off on on
40 on off on
45 off off on
50
ON
ON
OFF
60 off on off
75 on off off
100 off off off
（3）Mercy Tickets
Item Content
DIP Adjust（SW1）
Note
6 7
Mercy tickets
0 on on
1 off on
2 on off
3
OFF
OFF
16
（4）Score memory
Item Content
DIP Adjust（SW1）
Note
8
Score memory
Yes
ON
No
off
DIP Adjust 2（SW2）
（5）Score per ball
Item Content
DIP Adjust（SW2）
Note
1 2
Score per ball
1 on
on
2
OFF
ON
5 on
off
10 off
off
（6）Score per ticket
Item Content
DIP Adjust（SW2）
Note
3 4 5
Score per ticket
5 on
on on
8 off
on on
10
ON
OFF
ON
15 off off on
20 on on off
25 off on off
30 on off off
50 off off off
17
（7）Score to get BONUS score
Item Content
DIP Adjust（SW2）
Note
6 7 8
Score to get
BONUS score
100 on
on on
150 off on on
200
ON
OFF
ON
250 off off on
300 on on off
350 off on off
400 on off off
600 off off off
DIP Adjust 3（SW3）
（8）BONUS score
Item Content
DIP Adjust（SW3）
Note
1 2 3
BONUS score
200
ON
ON
ON
300 off on on
400 on off on
500 off off on
600 on on off
700 off on
off
800 on off off
900 off off off
（9）BONUS score +
Item Content
DIP Adjust（SW3）
Note
4 5
BONUS score +
0 on on
5
OFF
ON
10 on off
20 off
off
18
（10）BONUS score max
Item Content
DIP Adjust（SW3）
Note
6 7
BONUS score
max
400
ON
ON
600 off on
800 on off
999 off
off
DIP Adjust 4 (SW4）
（11）Ticket payout max
Item Content
DIP Adjust（SW4）
Note
1 2 3
Ticket payout
max
No limit
ON
ON
ON
6 off on on
8 on off on
10 off off on
12 on on off
14 off on
off
16 on off off
No payout off off off
(12) No use SW
SW3 SW4
8 4 5 6 7 8
ON ON ON ON ON ON
19
Input & output parts：
Input part：
INPUT CONTENT INPUT CONTENT INPUT CONTENT INPUT CONTENT
J9-1 Ticket reset J9-11 J9-21 J9-31
J9-2 Score sensor J9-12 J9-22 J9-32
J9-3 Ball gate SW J9-13 J9-23 J9-33
J9-4 J9-14 J9-24 J9-34
J9-5 J9-15 J9-25 J9-35
J9-6 J9-16 J9-26 J9-36
J9-7 J9-17 J9-27 J9-37
J9-8 J9-18 J9-28 J9-38
J9-9 J9-19 J9-29 J9-39
J9-10 J9-20 J9-30 J9-40
Output part：
OUTPUT CONTENT OUTPUT CONTENT OUTPUT CONTENT OUTPUT CONTENT
J22-1 Lighting 1 J23-9
Ball gate
motor
J24-17 J4-1
J22-2 Lighting 2 J23-10 Motor L&R J24-18 J4-2
J22-3 Lighting 3 J23-11 Motor U&D J24-19 J4-3 LAT
J22-4 Lighting 4 J23-12 J24-20 J4-4 CLOCK
J22-5 J23-13 J24-21 J4-5 DATA
J22-6 J23-14 J24-22 J4-6
J22-7 J23-15 J24-23 J4-7
J22-8 J23-16 J24-24 J4-8
OUTPUT CONTENT OUTPUT CONTENT OUTPUT CONTENT OUTPUT CONTENT
J20-1
POT_L
○
1
J19-1
1#Coin lock J21-1
Ticket Assy.
drive
J27-1 Speaker _L+
J20-2
POT_L
○
2
J19-2
1#SW signal J21-2
Ticket Assy.
signal
J27-2 Speaker _L -
J20-3
POT_R
○
1
J19-3
GND J21-3 12V J28-1 Speaker _R +
20
J20-4
POT_R
○
2
J19-4 J21-4 GND J28-2 Speaker _R -
J20-5
POT_L
○
3
J19-5 J21-5 Counter
J20-6
POT_R
○
3
J19-6
12V J21-6 J8-1 +12V
J21-7 J8-2 +12V
J21-8 J8-3 Coin counter
J8-4
Ticket
counter
21
7. MAINTENANCE, INSPECTION
7.1 Safety Check
Check the points listed before operating the machine. These checks are necessary for safe
machine operation:
1. Try to run the game before operation each day.
2. Conduct monthly routine checks of game components ensure good working condition
3. Check the machine regularly for dust and clean when necessary.
Note: Parts and components require preventative maintenance to be kept running smoothly
7.2 Handling Precautions
When installing or inspecting the machine, be very careful of the following points and
pay attention to ensure that the player can enjoy the game safely.
Non-compliance with the following points or inappropriate handling running counter to
the cautionary matters herein stated can cause personal injury or damage to the machine
• Before servicing the machine, be sure to turn power off. Servicing without turning the
power off can cause electric shock or short circuit.
• To avoid electric shock or short circuit, do not plug then unplug the power quickly
• Do not expose power cords and earth wires, these are susceptible to damage.
• Damaged cords and wires can cause electric shock or short circuit and should be
replaced immediately.
• When or after installing the product, avoid pulling the power cord to prevent
unnecessary wear and tear. Use the power button to disconnect power.
• In case the power cord is damaged, ask for replacement through where the product was
purchased from or replace locally. Continued usage of damaged cord can cause fire,
electric shock or leakage.
• Perform grounding appropriately. Inappropriate grounding can cause electric shock.
• Use fuses that meet specified rating. Fuses exceeding can cause an electric shock.
• Should a problem occur, turn off the power immediately and stop operating the
machine. Unplug the power cord of the service outlet. Operating the machine without
correcting the problem may cause a fire or injuries.
• Insert the power plug securely into the outlet. Poor contact may cause overheating,
resulting in fire or burns.
• To ensure the warning labels attached on the machine are visible and legible, install
the machine in a well-lit location, and keep the labels clean at all times. Make sure
the labels are not hidden behind other game machines.
WARNING
22
8. OVERALL CONSTRUCTION
9.1 Main Assembly 1：
23
No.
Part No.
Code
Name
Qty.
Spec.
Note
1 D107-101-000
DZPPL-00-05 LED upper holder
1 Q235 δ1.5
2 D107-102-000
DZPPL-00-06 LED L&R holder 1
2 Q235 δ1.5
3 D107-103-000
DZPPL-00-07 LED L&R holder 2
2 Q235 δ1.5
4 D107-501-000
DZPPL-00-10M LED L&R board
2 Plywood δ9
5 D107-401-000
22006021020
T5 daylight lamp 2 T5-21W 220V/blue
6 D107-104-000
DZPPL-00-13 Speaker net
2 Halftone δ0.5
7 D107-105-000
DZPPL-01-24 Fixation board B
1 Q235 δ1.5
8 D107-601-000
DZPPL-00-08 Protect cover
1 Clarity PVC δ1
9 D107-107-000
DZPPL-00-19 Relay holder
1 Electrolytic board δ=1.5
10 D107-108-000
TY-JX-008 Leveler
4 T5-21W
11 D107-602-000
DZPPL-00-17 Assy. Protect board
1 Clarity PVC δ2
12 D107-109-000
TY-JX-001 Power supply holder
1 Electrolytic board δ1.2
13 D107-001-000
DZPPL-04-00 L&R swing Assy.
1 Assembly
14 D107-002-000
DZPPL-03-00 Ball gate Assy.
1 Assembly
15 D107-402-000 25500000001 Castor 4 2.5”
16 D107-110-000
TY-JX-010 Leveler bracket
1 Q235 δ3
17 D107-111-000
DZPPL-01-25 Fixation board A
1 Q235 δ1.5
18 D107-112-000
DZPPL-00-03 Fixation board B
1 δ1.5
19 D107-113-000
DZPPL-01-27
Ball gate reinforce
board A
1 Q235 δ1.5
20 D107-114-000
DZPPL-01-28
Ball gate reinforce
board B
1 Q235 δ1.5
21 D107-115-000
DZPPL-01-26 Playfield ornament
1 δ1
22 D107-003-000
DZPPL-05-00
Up & Down swing
Assy.
1 Assembly
23 D107-603-000
DZPPL-00-15 LED menu
1 Clarity PVC δ3
24 D107-502-000
DZPPL-00-09M LED upper board
1 Plywood δ9
25 D107-403-000
228010000005 Speaker
2 4” 4Ω 15W
26 D107-404-000
22006013003
T5 daylight lamp 1 T5-13W 220V/blue
24
9.2 Cabinet：
25
No.
Part No.
Code
Name
Qty.
Spec.
Note
1 D107-003-000
DZPPL-02-00 Header Assy.
1 Assembly
2 D107-405-000
22003000023
Φ60 lamp-chimney 41 Φ60×65 white
3
D107-406-000
22003000021
LED lamp 14 DC12V White
D107-407-000
22003000022
LED lamp 13 DC12V Pansy
D10740 8 -000
22003000023
LED lamp 14 DC12V Yellow
4 D107-503-000
DZPPL-01-03M
R_back board 1 Plywood δ15
5 D107-116-000
DZPPL-00-12
R_side net 1 δ14
6 D107-117-000
DZPPL-00-04
Front net 1 δ14
7 D107-504-000
DZPPL-01-16M
Ball gate board 1 Plywood δ15
8 D107-505-000
DZPPL-01-13M
Playfield 1 1 Plywood δ15
9 D107-506-000
DZPPL-01-04M
R_front board 1 Plywood δ15
10 D107-507-000
DZPPL-01-06M
Front board 1 Plywood δ15
11 D107-004-000
DZPPL-00-01
Coin door Assy. 1 Assembly
12 D107-508-000
DZPPL-01-14M
Playfield 2 1 Plywood δ15
13 D107-509-000
DZPPL-01-19M
U_back door 1 Plywood δ15
14 D107-510-000
DZPPL-01-18M
D_back door 1 Plywood δ15
15 D107-118-000
TY-JX-13 Wire box bracket
1 Q235 δ1.5
16 D107-511-000
DZPPL-01-01M
L_back board 1 Plywood δ15
17 D107-119-000
DZPPL-00-11
L_side net 1 δ14
18 D107-512-000
DZPPL-01-02M
L_front board 1 Plywood δ15
26
9.3 Coin Door Assembly
No.
Part No.
Code
Name
Qty.
Spec.
Note
1 D107-409-000
25300171001 Lock
2 171
2 D107-120-000
DZPPL-00-14
Lock board 171 2 Q235 δ2.5
3 D107-410-000
25302222001 Lock
1 2222
4 D107-411-000
2310000006
Ticket machine 1 CL-022Q-386
5 D107-412-000
22301000001
Coin machine 1
6 D107-121-000
TY-JX-002
Counter install board A Q235 δ1.5
7 D107-122-000
DZPPL-00-02
Connect board 1 Q235 δ1.5
8 D107-123-000
TY-JX-007
Ticket box 120 1 Q235 δ1
27
9.4 Header Assembly：
No.
Part No.
Code
Name
Qty.
Spec.
Note
1 D107-604-000
DZPPL-02-03 lamp-chimney
1 Clarity PVC δ3
2 D107-413-000
22006000020
T5 daylight lamp 1 T5-21W 220V
3 D107-124-000
DZPPL-02-01
Cabinet 1 Q235 δ1.5
4 D107-125-000 DZPPL-02-02 Back board 1 Q235 δ1.5
28
9.5 Ball gate Assembly：
No.
Part No.
Code
Name
Qty.
Spec.
Note
1 D107-126-000
DZPPL-03-03 Fixation board
1 Q235 δ1.5
2 D107-605-000
DZPPL-03-04
Moving board 1 Black POM δ6
3 D107-127-000
DZPPL-03-05
Guide track 2 Q235
4 D107-513-000 DZPPL-01-15M Ball gate board 1 δ15 Plywood
5 D107-415-000 23405000091 DC motor 1 ZGB37 DC12V
6 D107-128-000
DZPPL-03-01
Motor fixation
board
1 Q235 δ2
7 D107-416-000
20106090135
bearing 1 d=6 D=10 L=15
8 D107-129-000
DZPPL-03-02
rocker-arm C 1 45# δ8
9 D107-130-000
DZPPL-03-06
SW bracket 1 Q235 δ1.5
10 D107-417-000
22604000007
Micro. SW 1
29
9.6 Left and Right Swing Assembly：
No.
Part No.
Code
Name
Qty.
Spec.
Note
1 D107-301-000
20102000021 Nut
1 Q235 M24
2 D107-131-000
DZPPL-04-04
Washer 1 #45 δ3
3 D107-418-000
20106000120
Bearing 2 61906
4 D107-419-000 DZPPL-04-02 Rotation pole 1 Q235 δ6
5 D107-420-000 23405000117 single-phase Motor 1 YN80-25/80JB150G10
6 D107-132-000 DZPPL-04-03 Motor holder 1 Q235 δ5
7 D107-133-000 DZPPL-04-06 Rocker_arm A 1 45# δ14
8 D107-134-000 DZPPL-04-05 Connect pole A 1 45# δ16
9 D107-421-000 20106000004 Bearing 2 SI8E d=8
10 D107-135-000 DZPPL-04-01 Assy. install bracket 1 Q235 δ5
30
9.7 Up and Down Swing Assembly：
No.
Part No.
Code
Name
Qty.
Spec.
Note
1 D107-136-000
DZPPL-05-07 Moving pole
1 Q235 δ3
2 D107-137-000
DZPPL-05-06
Casing 1 Q235 δ3
3 D107-138-000
DZPPL-05-02
Guide track 2 #45 δ12
4 D107-606-000 DZPPL-05-05 sleeve 4 H62
5 D107-139-000 DZPPL-05-03 Connect pole B 1 #45 δ12
6 D107-422-000 20106000003 Bearing 2 SA6E d=8
7 D107-140-000 DZPPL-05-01 Spring 1
8 D107-141-000 DZPPL-05-04 Rocker arm B 1 #45 δ10
9 D107-423-000 23405000091 Motor 1 YN80-25/80JB25G10 220V
31
9.8 Mouth Assembly：
No.
Part No.
Code
Name
Qty.
Spec.
Note
1 D107-142-000
DZPPL-06-04 Circumrotate arm
2 Stainless steel δ2
2 D107-143-000
DZPPL-06-03
Connect sleeve 1 Stainless steel δ2
3 D107-302-000 20105010001 Ring 1 Q235 d5 Black
4 D107-303-000 20107100301 R type pin 1 Φ1.2
5 D107-607-000 DZPPL-06-05 Baffle 1 PVC δ2
6 D107-613-000 DZPPL-06-06 Dino 1 fiberglass
7 D107-145-000 DZPPL-06-02 Connect pole 1 Stainless steel δ6
8 D107-425-000 20106000308 Bearing 1 SI5E
9 D107-146-000 DZPPL-06-01 Fixation board 1 Q235 δ2
32
9.11 Coin Counter & Electrical Box：
No.
Part No.
Code
Name
Qty.
Spec.
Note
1 D107-426-000
23000000005 Counter
1 C-012 DC12V
2 D107-427-000
22403000001
Pot. knob 1 Black
3 D107-428-000
21709000002
Pot. Connect board 1 VR.PCB
4 D107-429-000 22402010002 Button 1
PB：11C02R（Red）
5 D107-430-000 21901000010 Fuse 1
Ф5×20mm T6A 125VAC
（T3A 250VAC）
6 D107-431-000 21902000006 Fuse holder 1 R3-11 110V/250V/10A
7 D107-432-000 22601000005 SW 1 T125/55
8 D107-433-000 23201000009 Noise filter 1 10SS1-PB 115/250V10A
Fuse
ON
OFF
T6A
Coin counter
Ticket counter
-
Volume+
Ticket
reset
33
9.10 Electrical Part：
No.
Part No.
Code
Name
Qty.
Spec.
Note
1 D107-801-000
21706000037 2.3” LED PCB
3 LED23B3.PCB
2 D107-802-000
21701000014
Main board 1 PLAY V9
3 D107-803-000
21704000214
Lamp control board 1 LED CON-DDL.PCB(V1.0)
4 D107-434-000 22140000002 Relay 1 SSR-25DA
5 D107-435-000 21901000018 Fuse 1 Φ6×30mm T3A 250VAC
6 D107-436-000 21902000015 Fuse holder 1 FS-10
7 D107-437-000 21602000029 Power supply 1 EPT-H150S12
8 D107-438-000 21501000014 Sensor 1 E3F-DS5C4
In the
mouth
34
9.11 Game Decals：
Front ：
35
Back ：
36
No.
Part No.
Code
Name
Spec.
Qty.
Note
01 D107-729-000 DZPPL-HM-02E Main menu
980×965δ3
1
02 D107-702-000 DZPPL-HM-04 L_board menu
126×836(PVC100u)
1
03 D107-703-000 DZPPL-HM-05 R_board menu
126×836(PVC100u)
1
04 D107-730-000 DZPPL-HM-01E Header menu
δ3
1
05 D107-706-000 DZPPL-HM-13 Baffle menu
280×166 2PVC3
1
06 D107-705-000 DZPPL-HM-03 U_board menu
976×136(PVC100u)
1
07 D107-731-000 DZPPL-HM-07E Ball gate board menu
976×396(PVC100u)
1
08 D107-708-000 DZPPL-HM-06 Playfield menu
640×807 (100u)
1
09 D107-732-000 DZPPL-HM-08E Front door menu
970×465 (PVC100u)
1
10 D107-733-000 DZPPL-HM-14E Game description menu
143×174 (100u)
1
11 D107-734-000 TY-HM-34 Ticket payout decal
62×20 (PVC100u)
1
12 D107-735-000 TY-HM-01 Coin counter decal
30×6 (PVC100u)
1
13 D107-736-000 TY-HM-02 Ticket counter decal
30×6 (PVC100u)
1
14 D107-737-000 TY-HM-08 Ticket reset decal
30×6 (PVC100u)
1
15 D107-738-000 DZPPL-HM-10E L_board back menu
1200×1585(PVC100u)
1
16 D107-739-000 DZPPL-HM-09E L_board front menu
640×605 (PVC100u)
1
17 D107-740-000 TY-HM-03 Volume decal
30×6 (PVC100u)
1
18 D107-741-000 DZPPL-HM-11E R_board front menu
640×605 (PVC100u)
1
19 D107-742-000 DZPPL-HM-12E R_board back menu
1200×1585 ( PVC100u)
1
20 D107-743-000 DZPPL -HM-15 T3A decal
10×7 (PVC100u)
1
21 D107-744-000 TY-HM-33 No touching decal
66×66 (PVC100u)
1
22 D107-745-000 TY-HM-36 High voltage decal (small)
41×42 (PVC100u)
1
23 D107-746-000 TY-HM-12 Fuse T6A decal
22×6 (PVC100u)
1
24 D107-747-000 TY-HM-10 Fuse T3A decal
22×6 (PVC100u)
1
25 D107-748-000 TY-HM-16 Power SW decal A
12×25(PVC100u)
1
26 D107-749-000 TY-HM-40 Label 110V
25×6 (PVC100u)
1
27 D107-750-000 TY-HM-41 Label 220V
25×6 (PVC100u)
1
28 D107-751-000 DZPPL-HM-16E
CE authentication
nameplate
128×68(δ0.5)
1
29 D107-752-000 DZPPL-HM-18E 220V nameplate
128×68(δ0.5)
1
30 D107-753-000 DZPPL-HM-17E
CFF authentication
nameplate
128×68(δ0.5)
1
31 D107-754-000 DZPPL-HM-19E 110V nameplate
128×68(δ0.5)
1
37
Have Questions? Contact us!
www.zs-shiyu.com
www.universal-space.com
Canada Office Parts & Service
+1-905-477-2823
Email:
service@universal-space.com
Loading...