Universal Scientific USB114401 Users Manual

USB Client

Quick Start Flyer

5.

Set Network Name & Security Settings

a. Enter the Network Name of the wireless network.

b. (If required) Adjust Security Settings.

1.

Verify Kit Contents

2.

Insert CD-ROM

If the CD-ROM does not start automatically, consult

the section Troubleshooting.

6.

Install Driver & Client Manager

7.

Connect USB Client Hardware

3.

Install Software before Hardware

Select Install New Product.

4.

Select Identify Settings

Follow the instructions on your screen.

8.

Start using your Wireless Network

a. Use this button to return to the first page.

b. Use this button to display the table of contents.
c. Select this link to find more information.

Troubleshooting

If the CD-Wizard does not start automatically:
a. Click the Start button on the Windows task bar

and select Run.

b. Type "d:\ezsetup.exe", and click OK

(where d:\ represents the drive letter of your CD-

ROM drive).
If you have other problems installing or using this
product:
a. Consult the section “Find Information“ on the CD-

ROM (described on the previous page).
b. Consult the “readme.txt“ file on the CD-ROM.

c. Contact your hardware Reseller or Manufacturer.

REGULATORY STATEMENT

Technical Support

Universal Scientific Industrial Co., Ltd.
Address : 141, Lane 351, Taiping Road, Sec. 1, Tsao Tuen, Nan-Tou, Taiwan
Tel : + 886-49-2350876, 2325876
Fax : [phone]
E-mail : [e-mail]

Technical Support in the US

Address : 3590 Peterson Way, Santa Clara, CA 95054, USA
Tel : [phone]
Fax : [phone]
E-mail : [e-mail] ; [e-mail]

CAUTION: To maintain compliance with FCC’s RF exposure guidelines, this
equipment should be installed and operated with minimum distance 20cm between
the radiator and your body.
Use on the supplied antenna. Unauthorized antenna, modification, or attachments
could damage the transmitter and may violate FCC regulations.

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.