Universal Remote Control R6 User Manual

Page 2
Congratulations!
Congratulations on purchasing Universal Remote Control’s AVEX™ R6 Pre--Programmed and Learning remote control. You now have the power to control your entire home entertainment system with one easy--to--use remote. The AVEX R6 can be used with thousands of audio/video components because of the extensive library of codes that have already been programmed into the remote. So... get ready to sit back, relax, and simplify your home entertainment experience.
This Owner’s Manual is designed to assist you in programming your AVEX R6 remote to work with your components by guiding you through an easy step-by-step process. Everything you need to know about programming the AVEX R6 is contained in this Manual. AVEX R6 Owner’s Manual © 2007 Universal Remote Control, Inc.
This document is protected by the copyright laws of the United States and internationally by the Berne Convention. No part of this manual may be reproduced in any form without the express written consent of Universal Remote Control, Inc. Although reasonable care has been taken to assure the accu­racy of the information herein contained, Universal Remote Control, Inc. is not responsible for operational, technical or editorial errors or omissions. The specifi­cations and information in this manual may be subject to change without notice. MacroPower, SimpleSound and AVEX are trademarks of Universal Remote Control, Inc. Entertainment Made Simple® is a registered trademark of Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks of their respective owners.
UNIVERSALUNIVERSAL
remote controlremote control
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532
The Pioneer in Control Technology
Table of Contents
Getting Started - Overview
• Control up to 6 Components…………………..5
• Activating Component Buttons…………………5
• Learning Capability……………………………..5
• Battery Installation………………………..........6
• Low Battery Warning…………………………...6
• Couch Mode……….………….........…..........6
Special Advanced Features
• MacroPower™ & Other Macros……………....7
• ‘My Favorites’ - Favorite Channels……………..7
• SimpleSound™ & Other ‘Punch Throughs’......7
Keypad Layout & Button Functions...8
Programming AVEX R6 Using
Pre-Programmed Codes...................9
• Quick Set-Up Method...................................9
• Three-Digit Code Entry Method......................10
• Auto-Search Method....................................12
Programming AVEX R6 Using the
Learning Method............................14
AUX Function: Programming a 6th
Component....................................16
Finding a Component’s Set-Up
Code Number.................................16
Programming Special Advanced Features
• Programming Multi-Commands to
Macro Buttons............................................17
• MacroPower™ Total System On/Off.............17
• ‘My Favorites’ – Favorite Channels................20
• SimpleSound™ Total System Volume
Control......................................................21
• Channel Control ‘Punch Through’..................23
• Transport Control ‘Punch Through’.................24
• OSD (On-Screen Display) Control
‘Punch Through’...........................................25
Erasing Commands-Overview .......26
• Erasing a Single Learned Command..............26
• Erasing All Learned Commands from
One Component..........................................27
• Erasing MacroPower & Other Macro
Commands.................................................28
• Erasing SimpleSound & Other ‘Punch
Through’ Commands....................................29
• Factory Reset.............................................. 30
Page 3
Pre-Programmed Code Tables ......31
• CABLE/SAT ...........................................32
• TV ........................................................33-34
• DVR/VCR ..............................................35-36
• DVD ..................................................... 37
• AUDIO ..................................................38
• AUX ......................................................39
FAQs ........................................40
Warranty ..................................41
Specifications ............................41
Page 4
Getting Started - Overview
Control up to 6 Components
The AVEX R6 remote control is designed to control up to six different Audio/Video components and operate virtually all brands of AUDIO, TV, DVD, VCR/DVR, SAT/CABLE and AUX (Light, Music Server, etc.) components.
Component Buttons
Once you have programmed the AVEX R6 for all of your components, all you need to do is press a component button and all the buttons on the AVEX R6 will work with that component. For example, when you press the TV component button, all the buttons on your AVEX R6 will operate your TV. If you press the DVD component button, all the buttons on the AVEX R6 will operate your DVD.
Each time you press any of the buttons on the remote, the LED light in the component button will light up to indicate which component you are controlling.
Page 5
TV BUTTON
Learning Capability
The AVEX R6 has the ability to ‘learn’ functions from the original remote controls of other manufacturers, even if they are not in the Pre-programmed database.
Battery Installation
Press the tab and remove the cover of the battery compartment located in the back of your remote. Insert the two AAA batteries (included in the pack­age) making sure to match the positive (+) and negative (-) symbols as shown in the diagram. Place the cover back over the battery compartment.
Low Battery Warning
When the batteries are low and need to be replaced the component LED will quickly blink three times when you press the Power [ON] button.
Couch Mode
The AVEX R6 is designed to automatically turn itself off if a button is pressed for more than 30 seconds. This prevents battery power from being depleted should the remote accidentally slip between the couch cushions.
Page 6
INSERT BATTERIES
CORRECTLY
Special Advanced Features
The AVEX R6 also offers the following special advanced features that can offer you many time-saving conveniences:
MacroPower™ & Other Macro Buttons
MacroPower is a unique feature that enables you to turn all your components ON or OFF, all at the same time, simply with the press of one button. The AVEX R6 has six Macro buttons that are designed to store up to 20 commands in each button. Pressing any one of the Macro buttons will send out the series of commands that are stored in that button.
‘My Favorites’ (Favorite Channels)
This is one of the most desirable features of the AVEX R6 remote control. Once it’s set up, you can select one of four favorite channels with the press of one button – without the need to type in a channel number. So, whether it’s CNN or the Food Network, your favorite viewing spot is just one click away.
SimpleSound™ & Other ‘Punch Throughs’
SimpleSound Volume Control is a dynamic feature that gives you total volume control over all the components in your system, even those that do not have their own built--in volume control, such as TIVO, DVD and VCR... saving you the hassle and inconvenience of constantly needing to switch between component modes on the remote. As an example, in order to increase the volume while watching a DVD, you would typically have to pick up the TV remote control to increase the volume. With the AVEX R6, you do not even have to press the TV component button. Once you program SimpleSound in your DVD mode, you will automatically have TV volume control in DVD mode.
SimpleSound is what is called a ‘Punch Through’ feature and is not limited to volume control. It can also be applied to Channel Control, Transport Control, and OSD Control.
Page 7
Keypad Layout &
Button Functions
Page 8
POWER
Allows you to turn the selected component on and off.
SYSTEM OFF
Designed to send Power
On/Off commands for up
to six components with
one button press.
Used to select the component you want to operate and signals remote control activity.
Displays the Applications Menu through the Cable Set Top Box.
MENU
Displays the
Program
Guide listings
through the Cable
Set Top Box.
Used for programming steps and on-screen navigation and highlighting.
Displays information about the program currently playing or high­lighted in the Program Guide through the Cable Set Top Box.
INFO
Selects highlighted screen options.
Exits from current screen through the Cable Set Top Box.
Controls Picture-In­Picture actions.
PIP
CONTROLS
Use to enter code numbers for program­ming components and to enter channel numbers to tune in channels. Also used to make numeric entries on on-screen menus.
NUMBER
PAD
Raises or lowers the sound volume.
VOLUME
Selects the
video source from
available components.
Returns to the
previously tuned channel through the Cable Set Top Box.
LAST
Silences the Audio. Press to activate. Press again to restore sound to the previous level.
MUTE
Custom-programmable Favorite Channel Buttons
MY
FAVORITES
Perform standard VCR and DVD functions when in VCR and DVD mode, or VOD (Video-On­Demand) and DVR (Digital Video Recorder) functions when in Cable mode.
TRANSPORT
CONTROLS
TV, CBL,
VCR, AUDIO,
DVD, AUX
GUIDE
CURSOR
NAVIGATION
PAD
EXIT
SELECT
INPUT
Programming AVEX R6 using
Pre-Programmed Codes
There are three ways you can program your AVEX R6 using the component brand codes that are pre­programmed into the remote.
• Quick Set-Up Method
• Three-Digit Code Entry Method
• Auto-Search Method
The Quick Set-Up Method is a unique new feature that enables the fastest and easiest set-up by using one-digit codes for up to 10 major brands for each component. The Three-Digit Code Entry Method allows you to set-up the AVEX R6 using 3-digit codes for component brand names. It is also a fast and easy way to program the remote. The Auto-Search Method scans through all the brands in the remote control, one at a time. It should be used when either the Quick Set-Up or Three-Digit Code Entry Methods do not work.
* * *
Quick Set-Up Method
STEP 1: Manually or using your old remote, turn on the component you want to program—for example, to program your TV, turn on your TV set.
STEP 2: Point the AVEX R6 toward the component that you want to program (in this case the TV set) and press the component button (in this case the TV button). While keeping the component button pressed, press 1~0, in sequence, using the Number Pad. When the correct number is selected, the remote will send a POWER OFF command and the component will turn off. For example, the Sony Power Code is sent if you press the Number “1” button.
STEP 3: Release the component button to save the code. The component LED light will blink three times to confirm that the code has been stored.
Repeat the above three steps for other components.
Page 9
COMPONENT
BUTTONS
NUMBER
PAD
Three-Digit Code Set-Up Method
STEP 1: Find the 3-digit code numbers assigned to your brand from the lists in the back of this manual. The codes are listed by component category (i.e., TV, VCR, DVD, etc.), then by brand name. For instance, if you would like to locate a code for a Sony television, first locate the TV category and then look for the Sony brand.
STEP 2: Once you have located the 3-digit codes for each of the components that you wish to operate with your AVEX R6, write them ALL down on a piece of paper. It’s important that you write down all the codes listed for your brand because only one code is going to work with your component.
STEP 3: Manually or using your old remote, turn on the component you want to program—for exam­ple, to program your TV turn on your TV set.
STEP 4: On the AVEX R6, press the Component button that you want to program (in this case the button that says TV) and the SELECT [SEL] button at the same time. Hold down both buttons for 2 seconds until the TV Component LED light turns on. This signals that you are in programming mode.
IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.
Page 10
COMPONENT
BUTTONS
SELECT
BUTTON
STEP 5: Point the AVEX R6 toward the component (in this example the TV) and punch in the first 3-digit code that you wrote down for that specific compo­nent. Use the Number buttons 0~9 on the remote to punch in the code. The TV LED light will blink each time a number is pressed.
If the 3-digit code number you just punched in is the correct number, the component you are trying to program will turn off. If it did not turn off, enter the next code number from your list until it does turn off.
STEP 6: Once you’ve entered the code number and the component has turned off, press the POWER button on the AVEX R6 remote to turn the component back on.
Next test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for VCR and DVD) to make sure they all work. For example, perhaps your Sony TV turned off with code number 147, but the volume controls did not work properly. In this case, try the next code number listed for that component. Repeat Step 5 using the next code number until you find a perfect match.
STEP 7: Once you’ve entered a correct code you must save it. Press the component button you just programmed (in this case TV) one more time to save the code number. The component LED light will blink three times to confirm that the code was successfully stored. Now when you press the TV component button, all of the buttons will work with your TV.
Program the remaining components by repeating steps 3 through 7.
IMPORTANT: If you have tried all the set-up codes in the list and the component still did not turn off after Step 5, either the Auto-Search Method (page 12) or the Learning Method (page 14) will help you program.
Page 11
NUMBER
BUTTONS
Auto-Search Method
The Auto-Search Method is a way you can scan through all of the codes in the table to find the right code for your component.
STEP 1: Manually or using your old remote, turn on the component you want to program—for example, to program your TV, turn on your TV set.
STEP 2: On the AVEX R6, press the Component button that you want to program (in this case the button that says TV) and the SELECT [SEL] button at the same time. Hold down both buttons for 2 seconds until the TV Component button light turns on. This signals that you are in programming mode.
IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.
Page 12
UP
ARROW
DOWN
ARROW
STEP 3: Point the AVEX R6 remote control toward the component and press the UP arrow (or DOWN arrow) button once. Each time the UP or DOWN arrow button is pressed, the code will count up (or down) one code number and send a Power OFF signal. When the correct code is sent out, the component will turn off.
STEP 4: Once you have found the right code number and the component has turned off, press the POWER button on the AVEX R6 remote to turn the component back on.
Next test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for VCR and DVD) to make sure they all work. If any of the buttons do not work properly, you need to find a new code. Continue pressing the UP (or DOWN) arrow button until you find a new code that turns off the component and makes the VOLUME or PLAY buttons respond correctly.
STEP 5: Once you have found the right code, you must save it. Press the component button you just programmed (in this case TV) one more time to save the code number. The component LED light will blink three times to confirm that the code was successfully stored. Now when you press the TV component but­ton, all of the buttons will work with your TV.
Repeat the above five steps for other components.
NOTE: Use this method for those components you cannot program with either the Quick Set-Up or 3-digit Code Entry Methods.
IMPORTANT: If you cannot find the right code after 5 minutes of trying the Auto-Search Method, try the Learning Method (page 14).
PLEASE DO NOT RETURN
THIS PRODUCT TO THE STORE
PLEASE CONTACT OUR TECHNICAL
SUPPORT CENTER . IF YOU NEED ASSISTANCE
E-MAIL techsupport@UniversalRemote.com or dial
1-800-901-0800 (9:00AM - 6:00PM EST)
Page 13
THANK YOU
UNIVERSAL REMOTE CONTROL, INC 500 Mamaroneck Avenue Harrison, New York 10528 (914) 835-4484 U.S.A.
UNIVERSALUNIVERSAL
remote controlremote control
www.universalremote.com
Programming AVEX R6
using the Learning Method
STEP 1: Line up the AVEX R6 to the remote
control you want to ‘learn’ from, head--to--head as shown below. Make sure the heads are one to two inches apart.
STEP 2: On the AVEX R6, press the Component button that you want to program (in this case the button that says TV) and the SELECT [SEL] button at the same time. Hold down both buttons for 2 sec­onds until the TV Component button light turns on. This signals that you are in programming mode.
IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.
STEP 3: Press any button on the AVEX R6 that you want to teach a command to. For example, if you want to teach the MUTE button on the AVEX R6 the TV Mute command from the other remote, first press the MUTE button on the AVEX R6 and the TV com­ponent button LED light will blink once indicating that the AVEX R6 is ready to learn the command.
STEP 4: Press and hold the MUTE button on the other remote until the component button LED on the AVEX R6 blinks twice. Now you can continue learning all other buttons from your old remote by pressing the next button on the AVEX R6 and repeating this step.
Note: The component LED will blink five times if there was an error in the learning process. In this case, please repeat Steps 3 and 4.
Page 14
STEP 5: Once the AVEX R6 has learned all the buttons in the selected component mode, press and hold the Component button and SELECT [SEL] but­tons at the same time to save the learned functions. The component LED light will blink three times to confirm the programming. Now test all the buttons to make sure they learned correctly.
Repeat Steps 1-5 to program any other component modes.
If the Learning Method does not work, here are a few suggestions:
• If you have a Plasma TV, move to another room
• Avoid programming under fluorescent light or direct sunlight
• Put new batteries in the old remote
• Gradually vary the distance between the
two remote controls
• Tap the button on your old remote instead of pressing and holding it during the learning process
Here are some additional facts regarding the Learning process:
• Learned functions override any existing pre-programmed functions on the remote control
• Learned functions are automatically erased when a new function is learned on the same button
• Learned functions are retained even after a different set-up code number is programmed into the remote control
• To return to an original pre-programmed function,
a learned function must to be erased
Page 15
AUX Function: Programming
a 6th Component
After you’ve finished programming the AVEX R6 for five primary components and you did not use AUX, you can take advantage of the AUX function to pro­gram a 6th component, such as a second TV, DVD, or any other audio/video component that you may have in your system.
Finding a Component’s
Set-up Code Number
If you used the Auto--Search or Learning Methods to program a component, you may not know the code number you programmed. Here is a way for you to identify what that code number is, so you can make a note in the back of this Manual for future reference.
STEP 1: Press the component button you would like to verify and the SELECT [SEL] button at the same time for 2 seconds until the selected component LED light turns on.
IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.
Page 16
COMPONENT
BUTTONS
SELECT
STEP 2: Press the INFO button and count the number of times the Component LED light blinks. This number indicates the first digit of the code. Next it will pause for about one second and begin blinking again to indicate the number of the second digit. Then once again it will pause, then blink, o indicate the number of the third digit.
Example: One blink, pause, eight blinks, pause, three blinks indicates code number 183.
Note that ten (10) blinks represent the number 0.
INFO
Programming Special
Advanced Features
Programming Multi-Commands to Macro Buttons
The AVEX R6 has six Macro buttons (POWER, SYS­TEM OFF, A, B, C, D) that are designed to store up to 20 commands in each button. Pressing any one of the Macro buttons will send out the series of commands that are stored in that particular button.
MacroPower™ Total System On/Off
MacroPower makes several devices work together by pressing one button. Imagine the convenience of turning on your TV, your DVD player and your Surround Sound receiver by pressing a single button on your AVEX R6. What could normally take three remotes and three button pushes, the AVEX R6 can accomplish with the press of one button. We call that MacroPower. Any of the Power On or the System Off buttons can be programmed for MacroPower control. To set it up, follow these easy steps:
STEP 1: To program MacroPower commands for the Power ON button, press the POWER button and the MUTE button at the same time for 2 seconds until one of the component button LED lights turns on.
Page 17
POWER
MUTE
IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.
STEP 2: Press the component button you want to turn on and then the POWER button; repeat for all other components in the order you want them to turn on. The component LED lights will blink once each time you press the POWER button.
STEP 3: Once you’ve entered all the Power On commands, press the CHANNEL UP button to save your MacroPower commands. The component LED lights will blink three times to confirm that the programming has been successfully saved.
SUGGESTION: Most of the components have the same signal to turn the power On and Off. You may want to program MacroPower only in the POWER button and save the System Off button to turn components On or Off individually.
Note: If you want to program MacroPower for the SYSTEM OFF button, repeat the same steps used for Power ON programming.
Page 18
COMPONENT
BUTTONS
CHANNEL
UP
POWER
Notes regarding programming multi-com­mands to Macro buttons:
• You can program up to 20 commands on each
Macro button.
• You can program delays in between commands
by pressing the PAUSE button. Each press adds a one-half second delay.
• Also, if you add the delay time as the first step
of Macro commands, the remote will not send
theMacro unless the button is held for two
seconds. (This is the Press & Hold Function).
• You can also program macro commands in
‘layers’ by pressing the STOP button in between
commands. (For example, if you press CBL, 009, STOP, 035, STOP, 365, STOP and the CH+ button in Step 2) the remote will send out 009 at the first press of the ‘A’ button, and then
send out 035 at the second press, etc..
• You cannot program the CH+ or PAUSE buttons as macro commands.
Page 19
Page 20
Programming ‘My Favorites’ - Favorite Channel Buttons
In Cable mode, the A, B, C, D buttons are also designed to serve as dedicated Favorite Channel buttons. Each button will access one of your favorite channels with just one button press. Here’s how to program Favorite Channels:
STEP 1: Press the CBL button to select the Cable mode.
STEP 2: Press the ‘A’, ‘B’, ‘C’ or ‘D’ button and the MUTE button at the same time for 2 seconds until the CBL component LED turns on.
IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.
STEP 3: Using the Number Pad, punch in the Channel number of the Favorite Channel that you want to store in the Macro button. The Cable component LED light will blink once for each button pressed.
STEP 4: Press the CHANNEL UP button to store the commands entered. The CBL component LED will blink three times to confirm the programming.
CHANNEL
UP
MUTE
A
BUTTON
SimpleSound™ Total System Volume Control
SimpleSound is one of the most exciting features of the AVEX R6. It gives you total volume control over ALL the components in your system, even those that do not have built--in volume control, such as TIVO, DVD and VCR. SimpleSound saves you the hassle and inconvenience of constantly switching between component modes just to control volume.
First you should identify which device in your system will be used to deliver sound. In a basic system, the sound may come from your TV speaker. In a more advanced system, the sound may come from your audio components (such as a Surround Sound Receiver or Home Theatre system).
Now, let’s set--up SimpleSound. Here’s how:
STEP 1: Press and hold the button that corre­sponds to the Component you want to add volume control to (such as a DVD or VCR) and the SELECT (SEL) button at the same time for about three sec­onds until the component LED light turns on.
IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.
Page 21
COMPONENT
BUTTONS
SELECT
STEP 2: Press the VOLUME UP button and then press either the TV or AUDIO component button that you want to use for volume. The Component LED light will blink three times to confirm that it is saved. This sets up three buttons (Volume Up, Volume Down and MUTE) as a group for that component.
Repeat Steps 1-2 for all other components.
Note: SimpleSound is what’s technically referred to as a “Punch Through” feature and is not limited to volume control. It can also be applied to other groups of buttons. If you find yourself switching to a particular component mode frequently to access a particular control, consider using Punch Through.
Page 22
VOLUME
UP
Page 23
Channel Control ‘Punch Through’
This ‘punch through’ enables you to program the AVEX R6 so that either the Cable or TV Channel Controls (CHANNEL UP, DOWN, LAST, CHANNEL NUMBERS 0-9, +10 and ENTER) will also operate in other component modes on the remote control.
STEP 1: Press and hold the component button you want to add channel control to, such as DVD or VCR, and the SELECT [SEL] button at the same time for two seconds until the Component LED light turns on.
IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.
STEP 2: Press the CHANNEL UP button. The component LED light will blink once.
CHANNEL
UP
SELECT
COMPONENT
BUTTONS
STEP 3: Press either the TV or CBL button that you want to use as the source of channel control. The component LED will blink three times to confirm it is saved.
Transport Control ‘Punch Through’
This ‘punch through’ enables you to program the AVEX R6 so that VCR or DVD Transport Controls (PLAY, STOP, FF, REW, PAUSE, SKIP and RECORD) will also operate in other component modes on the remote control.
STEP 1: Press and hold the component button you want to add Transport Control to, such as CBL or TV, and the SELECT [SEL] button at the same time for two seconds until the Component LED light turns on.
IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.
STEP 2: Press the PLAY button. The component LED light will blink once.
Page 24
SELECT
COMPONENT
BUTTONS
PLAY
STEP 3: Press either the DVD or VCR button that you want to use as the source of Transport Control. The component LED will blink three times to confirm it is saved.
OSD (On-Screen Display) Control ‘Punch Through’
This ‘punch through’ enables you to program the AVEX R6 so that CBL or DVD OSD Controls (MENU, GUIDE, INFO, EXIT, SEL and 4 Cursor Controls) will also operate in other component modes on the remote control.
STEP 1: Press and hold the component button you want to add OSD Control to, such as TV or VCR, and the SELECT [SEL] button at the same time for two seconds until the Component LED light turns on.
IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.
STEP 2: Press the MENU button. The component LED will blink once.
STEP 3: Press either the CBL or DVD button that you want to use as the source of OSD Control. The component LED will blink three times to confirm it is saved.
Page 25
SELECT
COMPONENT
BUTTONS
MENU
Page 26
Erasing Commands --
Overview
You can erase a single learned command, all learned commands in each component mode, SimpleSound programming, MacroPower com­mands, or re--set the remote to original factory default settings.
Erasing a Single Learned Command from One Component
STEP 1: Press the component button where the learned command is stored and the ENTER buttons at the same time for two seconds until the compo­nent LED light turns on.
IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.
COMPONENT
BUTTONS
ENTER
STEP 2: Press and hold the button you want to erase for two seconds. The component LED light will blink twice to confirm the erasure.
STEP 3: Repeat Step 2 to erase any other buttons in the selected component mode.
STEP 4: To exit Erase mode, press and hold both the component button and the ENTER (ENT) button at the same time until the component LED light blinks three times.
Page 27
Erasing All Learned Commands from One Component
This function allows you to erase all the learned commands from one component. For example, if you want to erase all learned commands on the TV component button because you bought a new TV, the process is very simple.
STEP 1: Press the component button where all the learned commands are stored and the ENTER button at the same time for 2 seconds until the component LED turns on.
IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.
STEP 2: Press and hold both the component button you want to erase and the PAUSE button at the same time for two seconds, until the component LED light blinks twice to confirm the erasure.
COMPONENT
BUTTONS
PAUSE
ENTER
STEP 3: To exit Erase mode, press and hold both the component button and the ENTER (ENT) button at the same time until the component LED light blinks three times.
Page 28
Erasing MacroPower & Other Macro Commands
STEP 1: To erase MacroPower commands on the POWER ON or SYSTEM OFF button, press and hold either the POWER ON or SYSTEM OFF button and the MUTE button simultaneously for two seconds until the current status component LED turns on.
IMPORTANT: If you don’t proceed to the next step within 30 seconds, the LED will turn off and exit set-up mode and you will need to start over.)
STEP 2: Press the CHANNEL UP button to erase and exit Erase mode. The component LED light will blink three times to confirm the erasure.
SYSTEM
OFF
POWER
ON
MUTE
NOTE: To erase other Macros, simply press the appropriate button in Step 1 in combination with the MUTE button.
CHANNEL
UP
Page 29
Erasing SimpleSound & Other ‘Punch Through’ Commands
STEP 1: Press and hold the Component button you want to erase volume control from, such as DVD or VCR and the SELECT [SEL] button at the same time for two seconds until the Component LED light turns on.
STEP 2: Press the VOLUME UP button and the same component button from Step 1. The compo­nent LED light will blink three times to confirm the erasure.
Repeat Steps 1--2 to erase SimpleSound commands from other components.
NOTE: To erase other ‘punch through’ commands, simply press the following buttons in place of VOL­UME UP in Step 2:
• For Channel Control, press: CHANNEL UP
• For Transport Control, press: PLAY
• For OSD Control, press: MENU
VOLUME
UP
SELECT
COMPONENT
BUTTONS
Factory Reset
You can reset your AVEX R6 remote to the original factory default settings.
Press and hold both the TV and RECORD buttons for about five seconds until the SAT/CABLE component LED light blinks five times. All programming and set­up codes that you have entered into the remote will be erased and the AVEX R6 will return to the origi­nal factory default settings.
Warning
This procedure will erase all programming and set-up codes that you have entered into the remote.
Page 30
TV
COMPONENT
BUTTON
SAT/CABLE
RECORD
Page 31
Pre-Programmed
Code Tables
The AVEX R6 Pre-Programmed code library is classified by category (TV, VCR, DVD, etc.).
Within each category, the code numbers are listed in rows by brand (Sony, Panasonic, B & K, etc.). Some brands have more than one three-digit code.
Circle the correct row and refer to it while you perform setup operations.
CABLE/SAT
TV
DVR/VCR
DVD
AUDIO
AUX
Cable Set top boxes and satellite receivers 32
TVs, Plasmas, Projectors and Monitors 33-34
VCRs, DVRs & Combo Units 35-36
DVD Players and Recorders 37
Amps, Preamps and A/V Receivers 38
iPod, Media PC, Gaming System, Lighting Controls 39
Page 32
CABLE Boxes ABC 004 042 ADELPHIA 043 110
ADVANCED NEWHOUSE 043
ALTRIO 043 AMERICAST 099 ARMSTONG 110
AT&T BROADBAND 110 ATLANTIC BROADBAND 043 110
BELL SOUTH 099 BLUE RIDGE 043 110 BRESNAN 110 BRIGHT HOUSE 043 110 BUCKEYE COMM 110 CABLEVISION 043 110 108 CHARTER 043 110 COGECO 110 COMCAST 043 110 COMSAT 110 COX DIGITAL 043 110 DIRECTOR 110 EAGLE 030
GENERAL INSTRUMENT 110 004
GNC 099 GOLDEN CHANNEL 030 INSIGHT 110 JERROLD 110 004 MASSILLON 110 MEDIACOM 110 MOTOROLA 110 148 111 MOXI 111 NCTC 110 OAK 031 PACE 043 110 PANASONIC 044 047 PHILIPS 085 PIONEER 043 034 105 RCA 047 RCN 110 RODGERS 043 SAMSUNG 030
SCIENTIFIC ATLANTA 001 042
SEREN 043 SERVICE ELECTRIC 110 SHAW 110 SIGECOM 043 SONY 108 SPRUCER 047 STARCOM 004 STARGATE 030 SUSQUEHANNA 043 110 TIME WARNER 043 110 TORX 004 UNITED CABLE 004 VIDEOTRON 043 WIDE OPEN WEST 043 099 SATELLITE Receivers CABLEVISION 148 DIRECTV 173 DISH 122 ECHOSTAR 122 EXPRESSVU 122 GE 116
GENERAL INSTRUMENT 148
GOI 122 HITACHI 114 HTS 122 HUGHES 114 JVC 122 LG 170 MITSUBISHI 114 NEXT LEVEL 148 PANASONIC 142 PHILIPS 006 156 114 PROSCAN 116 RADIOSHACK 148 RCA 116
SAMSUNG 163 169 175 SONY 115 STAR CHOICE 148 TOSHIBA 127 114 VOOM 148
CABLE/SAT
Brand Code Numbers
Page 33
ABEX 025 ADMIRAL 072 251 333 ADVENT 247 ADVENTURA 002 AIKO 103 ALERON 028 AKAI 116 146 248 281 404 405 A MARK 112 143 AMERICA ACTION 043 AMPRO 073 AMSTRAD 052 ANAM 043 054 056 080 112 AOC 116 363 112 058 APEX DIGITAL 006 AUDIOVOX 076 BELCOR 116 BELL&HOWELL 333 072 BRADFORD 043 BROKSONIC 238 BROCKWOOD 116 CANDLE 116 002 003 363 CAPEHART 058 CELEBRITY 001 CENTURION 116 CETRONIC 043 CITIZEN 116 002 003 363 043 258 103 143 CLARION 043 CLASSIC 043 CLP CLASSIC 333 COLORTYME 116 CONCIERGE 073 CONCERTO 363 CONTEC 043 050 051 CORNEA 116 CORONADO 143 CRAIG 043 054 CROSLEY 164 CROWN 043 143 CURTIS MATHES 116 258 363 143 CXC 043 DAEWOO 363 016 043 044 076 103 114 125 127 143 DAYTRON 363 143 DELL 320 164 363 DIMENSIA 333 DUKANE 011 025 DUMONT 116 073 DURABRAND 096 DWIN 257 DYNASTY 043 EIKI 187 ELECTROBAND 001 ELECTROHOME 143 024 076 196 ELEKTRA 072 EMERSON 028 048 043 155 005 116 363 047
050 051 076 096 143 153 154 ENVISION 116 ESA 323 FISHER 007 057 FUJITSU 246 198 FUNAI 028 043 052 FUTURETECH 043 GATEWAY 242 268 GE 073 116 008 009 034 056 074 155
333 363 GEM 391 GIBRALTAR 116 073 GOLDSTAR 113 116 102 004 106 112 127 143 GRUNPY 028 043 HALL MARK 363
HARLEY DAVIDSON 028
HARVARD 043 HAVERMY 081 HELLO KITTY 076 HIMITSU 043 HISENSE 419 HITACHI 011 166 363 009 010 012 023 075
143 158 072 HP 378 316 327
INFINITY 164 INFOCUS 333 330 INTEQ 073 INSIGNIA 350 399 400 052 164 403 JANEIL 002 JBL 164 JCB 001 JCPENNEY 363 024 116 008 009 030 065 258 143 333 JENSEN 013 JVC 038 034 001 083 199 210 KAWASHO 116 001 KEC 043 KENWOOD 116 001 KLOSS 002 059
KLOSS NOVABEAM 002
KMC 143 KTV 043 116 143 154 KURAZAI 072 LG 363 113 116 102 363 106 112 127 143 LODGENET 072 LOEWE 164 LOGIK 072 LUXMAN 363 LXI 166 007 138 052 251 333 164 MAGNAVOX 164 059 116 003 060 061 363 127
022 333 094 226 390 MAJESTIC 333 072 MARANTZ 116 164 MATSUI 164 MATSUSHITA 080 MAXENT 242 MEGATRON 116 011 MEMOREX 007 072 363 MGA 116 363 024 028 042 MIDLAND 333 073 MINTEK 282 362 MINUTZ 008 MITSUBISHI 124 109 024 363 028 040 042 146
MONTGOMERY WARD
333 072 MOTOROLA 081 MTC 116 363 258 MULTITECH 043 NAD 138 025 NEC 272 132 134 116 040 016 024 056 019 262 NET TV 242 NIKEI 043 NIKKO 116 NTC 103 NUVISION 351 ONKING 043 ONWA 043 OPTIMUS 025 OPTONICA 019 251 OPTOMA 265 ORION 096 PANASONIC 080 034 056 164 208 PHILCO 116 003 059 060 164 363 024 056 PHILIPS 164 005 093 038 116 003 363 059 127 206
PILOT 116 PIONEER 234 025 018 023 116 272 393 POLAROID 388 PORTLAND 363 143 PRISM 034 PROSCAN 333 PROTON 363 112 058 143 171 172 PROTRON 392 398 PULSAR 116 073 QUASAR 034 056 RADIO SHACK 019 363 143 043 127 RCA 333 065 116 363 024 056 152 023 074 REALISTIC 007 019 043 047 RUNCO 072 182 073 395 416 SAMPO 116 058 363 242 SAMSUNG
258 050 089 105 363 127 143 333 228 229
SAMSUX 116 SANSEI 076 SANSUI 096 SANYO 166 007 020 053 057 082 18
TV
Brand Code Numbers
Page 34
SCEPTRE 276 SCOTCH 116 SCOTT 028 043 363 048 143 SEARS 138 030 363 007 028 057 143 094
333 082 166 SELECO 205 011 SHARP 251 019 014 028 029 363 022 143 175 SHENG CHIA 081 SHOGUN 116 SIGNATURE 072 SIMPSON 003 SONY 001 SOUNDESIGN 028 363 003 043 SPECTRICON 112 SQUAREVIEW 052 STARLITE 043 SSS 363 043 SUPRA 116 SUPRE MACY 002 SUPREME 001 SVA 328 SYLVANIA 116 003 052 059 060 164 044 333 127 SYNTAX OLEVIA 333 363 TANDY 251 TATUNG 056 TECHNICS 034 080 TECHNOL ACE 028 TECHWOOD 363 TEKNIKA 002 003 363 024 028 043 072 258 143 TELEFUNKEN 037 046 TELERENT 072 TERA 172 TMK 363 TNCI 073 TOSHIBA 138 030 007 040 258 325 TOTEVISION 143 TVS 096 UNIVERSAL 008 009 VICTOR 038 VIDEO CONCEPTS 146 VIDIKRON 174 164 188 192 VIDTECH 363 VIEWSONIC 242 389 VIKING 002 VIZIO 386 387 WARDS 363 008 009 019 028 060 061 072
074 143 164 034 WAYCON 015 WESTINGHOUSE 076 276 YAMAHA 116 363 YORK 363 YUPITERU 043 ZENITH 363 073 072 095 103 ZONDA 112
TV
Brand Code Numbers
Page 35
DVR/VCR
Brand Code Numbers
ADMIRAL 025 053 ADVENTURA 034 AIKO 117 AIWA 034 161 AKAI 016 146 043 124 125 AMERICA ACTION 117 AMERICAN HIGH 031 AMPRO 072 ANAM 145 ASHA 040 AUDIO DYNAMICS 012 023 039 043 AUDIOVOX 101 BEAUMARK 040 BROOKSONIC 035 037 129 CALIX 101 CANON 028 145 CAPEHART 108 CCE 024 117 CITIZEN 101 117 COLT 024 CRAIG 003 102 135 CURTIS MATHES 145 CYBERNEX 040 DAEWOO 111 116 117 005 010 108 110 112 DAYTRON 108 DBX 012 023 039 043 DYNATECH 034 053 ELECTROHOME 059 ELECTROPHONIC 101 EMERSON 006 029 035 017 025 027 145 034
036 037 101 129 131 153 162 116 FISHER 003 010 008 009 FUJI 031 FUNAI 034 GARRARD 034 GE 145 072 147 144 GO VIDEO 132 136 155 102 115 GOLDSTAR 101 114 013 012 123 GRADIENTE 034
HARLEY DAVIDSON 034 HARMAN KARDON 012
HARWOOD 024 HITACHI 013 026 150 034 043 160 HQ 034 INSTANTREPLAY 145 JCL 145 JCPENNEY 012 013 015 102 101 JENSEN 043 JVC 048 043 130 150 012 145 KEC 101 KENWOOD 048 034 KLH 024 KODAK 145 101 LG 101 114 013 012 123 LLOYD 034 LOGIK 024 LXI 034 003 009 017 MAGIN 102 MAGNAVOX 067 145 034 164 MARANTZ 067 012 145 MARTA 101 MATSUI 027 030 MATSUSHITA 145 MEI 145 MEMOREX 101 003 010 145 034 053 072
102 139
MGN TECHNOLOGY 040
MINOLTA 013 MITSUBISHI 059 061 151 013 051 MOTOROLA 145 053 MTC 034 102 MULTITECH 024 034 NEC 012 023 039 043 048 NIKKO 101 NOBLEX 040 NORDMENDE 043 OLYMPUS 031 OPTIMUS 101 OPTONICA 053
ORION 025 PANASONIC 167 070 145 163PENTAX
013 145 PHILCO 45 034 067 PHILIPS 067 145 034 101 071 PILOT 101 PIONEER 021 013 048 PORTLAND 108 PROFITRONIC 040 PROTEC 024 PULSAR 072 QUARTZ 002 RADIO SHACK 123 RADIX 101 RANDEX 101 RCA 144 147 145 013 034 102 REALISTIC 003 008 010 145 034 102 053 101 RICO 058 RUNCO 148 SAMSUNG 115 102 113 112 144 147 125 SANKY 053 SANSUI 022 043 048 135 SANYO 003 010 102 SCOTT 017 037 112 129 131 SEARS 003 008 010 013 101 009 017 073 112 SHARP 149 145 165 SHINTOM 024 SHOGUN 040 SIGNATURE 034 SINGER 024 SONY 056 057 058 003 145 149 154 SOUNDESIGN 034 STS 013 SYLVANIA 145 034 059 067 SYMPHONIC 034 TANDY 010 034 TATUNG 039 043 TEAC 034 039 043 TECHNICS 145 070 TEKNIKA 145 019 034 101 THOMAS 034 TMK 006 TOSHIBA 112 131 008 059 013 TOTEVISION 102 101 UNITECH 102
VECTOR RESEARCH 012
VICTOR 048 VIDEO CONCEPTS 012 034 VIDEOSONIC 102 VILLAIN 034 WARDS 003 013 017 024 145 034 102 053 131 WESTINGHOUSE 024 025 XR-1000 024 145 034 YAMAHA 012 034 039 043 ZENITH 072 048 101 034 058
TV/VCR Combos AMERICA ACTION 117 DAEWOO 005 117 EMERSON 153 FUNAI 034 GOLDSTAR 101 123
HARLEY DAVIDSON 034
HITACHI 034 JCPENNEY 101 LG 101 123 LLOYD 034 MAGNAVOX 034 067 MEMOREX 101 PANASONIC 070 167 PHILIPS 034 067 145 RADIO SHACK 123 RCA 034 144 SAMSUNG 102 SEARS 101 SONY 057 154 058 SYLVANIA 067 SYMPHONIC 034 THOMAS 034 ZENITH 034
Page 36
DVR Receivers HUGHES 001 HUMAX 001 PHILIPS 001 RCA 809 REPLAY NETWORKS775 SONY 804 805 TIVO 001 TOSHIBA 001
DVR/VCR
Brand Code Numbers
Page 37
DVD
Brand Code Numbers
AIWA 146 AKAI 281 ALLEGRO 091 ALPINE 098 APEX DIGITAL 087 111 115 BLAUPUNKT 111 BROKSONIC 130 CINEVISION 091 COBY 260 CYBERHOME 271 DENON 173 138 080 DURABRAND 091 DVD 2000 017 EMERSON 091 143 ENTERPRISE 074 FISHER 147 FUNAI 143 GE 027 GOLDSTAR 091 GO VIDEO 137 091 220 221 222 GREENHILL 111
HARMAN KARDON 084 140
HITACHI 101 HITEKER 087 ILO 268 INITIAL 111 INTEGRA 142 180 280 JBL 084 JVC 012 KENWOOD 151 KISS 279 KLH 135 KRELL 104 LITEON 264 265 LEXICON 148 LG 091 057 074 MAGNAVOX 001 096 MARANTZ 001 095 MALATA 267 MERIDIAN 153 MICROSOFT 027 206 MINTEK 111 282 MITSUBISHI 017 MYRYAD 102 134 NAD 088 NAKAMICHI 103 NESA 111 ONKYO 076 035 180 OPTIMUS 023 OPPO 266 ORION 130 PANASONIC 138 144 150 PHILIPS 001 095
PHILIPS MAGNAVOX 035 001
PIONEER 023 131 POLAROID 233 POLK AUDIO 035 001 PROSCAN 027 RCA 027 RIO 091 RJTECH 269 SAMSUNG 170 165 137 159 SANSUI 154 SANYO 147 SEARS 130 SENSORY SCIENCE 222 SHARP 094 SHINSONIC 033 SONIC BLUE 091 SONY 002 033 145 191 SYLVANIA 143 SYMPHONIC 143 TATUNG 102 TEAC 023 270 TECHNICS 138 TECHWOOD 088 THETA DIGITAL 023 THOMPSON 027 TOSHIBA 035 130 141 164 188 YAMAHA 138 089 001 197 ZENITH 057 074 091
DVD Recorders GO VIDEO 220 221 222 CYBERHOME 271 ILO 268 KISS 279 LITEON 265 PANASONIC 138 SENSORY SCIENCE 222 SONY 191 TOSHIBA 188 273
TV/DVD Combos AKAI 281 AIWA 146 FUNAI 143 MINTEK 282 SAMSUNG 165 SYLVANIA 143 SYMPHONIC 143 TOSHIBA 130
TV/DVD/VCR Combos BRAND CODE NUMBERS MAGNAVOX 143 PANASONIC 144 SYLVANIA 143 TOSHIBA 164
DVD/VCR Combos GO VIDEO 137 PANASONIC 150 PHILIPS 001 (VCR Functions for VCR 067) SAMSUNG 137 159 SANSUI 154 SONY 145 TOSHIBA 141 ZENITH 091 (VCR Functions for VCR101)
Page 38
AUDIO
Brand Code Numbers
ADCOM 082 092 225 161 269 356 AIWA 170 018 104 202 203 213 211 188 AKAI 189 ANTHEM 335 337 ARCAM 141 077
ATLANTIC TECHNOLOGY 342
AUDIO FILE 071 B & K 096 097 BOSE 409 460 347 070 170 224
BOSTON ACOUSTICS 447
CARVER 006 028 061 071 201 214 226 185
013 077 284 CITATION 148 CLARION 026 DELPHI 515 DENON 001 109 215 230 234 330 ELAN 057 290
ENLIGHTENED AUDIO 099 098
ESCIENT 451 FISHER 214 182 FLEXTRONICS 378
FOSGATE AUDIONICS 148 342
GOLDSTAR 008
HARMAN KARDON 148 233 077 154 118 318
HITACHI 020 INSIGNIA 589 INTEGRA 275 017 046 108 080 209 JAMO 398 JCPENNEY 216 JVC 163 191 114 279 291 KENWOOD 026 066 145 192 182 005 280 374 KLH 331 KOSS 216 573 KRELL 072 384 LEXICON 357 360 120 235 236 237 LINN 124 377 LUXMAN 009 139 052 165 115 004 MAGNAVOX 086 164 152 208 MARANTZ 006 028 031 040 063 185 186 265
289 492 MCINTOSH 238 286 MERIDIAN 100 012 013 MITSUBISHI 242 204 MONDIAL 157 158 042 043 081 112 MYRYAD 077 NAD 186 113 NAKAMICHI 040 244 245 172 183 287 NEC 176 NIRO 343 NILES 403 ONKYO 275 017 046 108 080 209 OPTIMUS 026 041 OUTLAW 342 PANASONIC 032 195 219 177 292 PARASOUND 129 130 132 261 294 295 333 334 PHILIPS 249 250 063 PIONEER 480 014 039 044 069 168 116 035
078 198 POLKAUDIO 515 PROCEED 144 268 RCA 010 048 117 156 067 288 REALISTIC 019 073 075 095 ROTEL 083 074 085 SAMSUNG 016 SANSUI 040 048 110 063 065 228 SANYO 214 SCOTT 019 SHARP 026 094 175 SHERWOOD 024 102 106 447 SIRIUS 555 SONY 002 018 247 248 166 101 184 218
271 380 SOUNDESIGN 036 SUNFIRE 344 345 182 TEAC 005 019 049 040 212 217 TECHNICS
122 176 193 219 178 177 200 257 262
THETA DIGITAL 136 TOSHIBA 060 087 198 278
XM SATELLITE RADIO 515
YAMAHA 205 026 253 169 067 173 264 232
089 274
ZENITH 143 210
SATELLITE Radios DELPHI 515 KENWOOD 550 POLKAUDIO 515 SIRIUS 555 SONY 380
XM SATELLITE RADIO 515
Page 39
AUX
Brand Code Numbers
iPod Controls APPLE / iPod 901 912 BOSE 909 KENSINGTON 906
MEDIA PC Controls DELL 001 GATEWAY 001 HP 001 KEYSPAN 797 SONY 001 TOSHIBA 001 WINBOOK 001
GAMING SYSTEM Controls
MICROSOFT / XBOX 908 607
SONY/PS2 914
LIGHTING Controls LITE-TOUCH 708 757 LUTRON 658 659 577 X-10 683 593 XANTECH 688 689
Page 40
Frequently Asked Questions
If the batteries run out, will I lose my settings?
No. The AVEX R6 stores all of your settings in non­volatile FLASH memory. You could remove the bat­teries for months, replace them at your convenience, and the AVEX R6 would still remember your settings.
What is MacroPower?
MacroPower is a very useful way to make a lot of things happen with one button push. For example, in most home theaters, to watch television, the user must turn on the TV, then turn on the Cable Box or the Satellite Receiver, then turn on the Surround Sound system for sound. Instead of pressing all of those buttons one at a time, MacroPower enables you to turn on all of these components, in the sequence you want, with one button push. For more information on why and how you should program MacroPower commands, refer to page 17 in this Manual.
What if my remote control no longer works from a distance?
Replace the batteries with new Alkaline batteries.
Who can I contact for more answers?
The Universal Remote Control technical support and customer service staff are ready to answer any ques­tions you might have.
E-Mail us at techsupport@universalremote.com
Visit our website www.universalremote.com
Call us at (914)-835-4484 Monday - Friday,
9AM to 6PM (EST) USA Limited Warranty
Page 41
USA Limited Warranty
UNIVERSAL REMOTE CONTROL, INC. warrants this product against defects in material or workmanship for a period of one (1) year and as set forth below. Universal Remote Control will, at its sole option, repair the product using new or comparable rebuilt parts, or exchange the product for a comparable new or rebuilt product.
This warranty does apply to the following:
• Units purchased from unauthorized resellers.
• Units purchased second-hand (used).
• Units installed or deployed for rental or commercial use.
• Damage caused by misuse, neglect, or acts of nature.
• Products that have been modified or incorporated into other products.
• Products purchased more than 12 months ago.
Specifications
Learning Capability
IR frequencies (15kHz to 100kHz)
Macro Capability
6 Macros of up to 20 steps each IR Range (Line of Sight via Infrared) 30--50 feet, depending on the environment
Weight
6.9 oz. (with batteries)
Size
2 1/8” x 1 1/8” x 8 3/4”
Batteries
Two AAA Alkaline batteries included
Loading...