Universal Global Scientific MS01 User Manual
MS-01 SOM Module
Page 1
Parameter
Test Conditions
Typ
Unit
1 Mbps DSSS (b) TX Output
power
1 Mbps BPSK 802.11(b) Mask Compliance 35%
EVM RMS power over TX packet, 20 MHz
18 +/- 1.5
dBm
11 Mbps DSSS (b) TX Output
power
11 Mbps CCK 802.11(b) Mask Compliance 35%
EVM RMS power over TX packet, 20 MHz
18 +/- 1.5
dBm
6 Mbps OFDM (g) TX Output
power
6 Mbps BPSK 802.11(g) Mask Compliance -5 dB
EVM RMS power over TX packet, 20 MHz
16 +/- 1.5
dBm
54 Mbps OFDM (g) TX Output
power
54 Mbps 64-QAM 802.11(g) Mask Compliance -25
dB EVM RMS power over TX packet, 20 MHz
14 +/- 1.5
dBm
MCS0 OFDM (n) TX Output
power, 20 MHz
6.5 Mbps BPSK 802.11(n) Mask Compliance -5 dB
EVM RMS power over TX packet, 20 MHz
16 +/- 1.5
dBm
MCS7 OFDM (n) TX Output
power, 20 MHz
65 Mbps 64-QAM 802.11(n) Mask Compliance -27
dB EVM RMS power over TX packet, 20 MHz
13 +/- 1.5
dBm
MCS0 OFDM (n) TX Output
power, 40 MHz
13.5 Mbps BPSK 802.11(n) Mask Compliance -5 dB
EVM RMS power over TX packet, 40 MHz
16 +/- 1.5
dBm
MCS7 OFDM (n) TX Output
power, 40 MHz
135 Mbps 64-QAM 802.11(n) Mask Compliance -27
dB EVM RMS power over TX packet, 40 MHz
13 +/- 1.5
dBm
`
1. WiFi and Bluetooth
MS-01 Integrated Qualcomm WCN3990 to support WLAN 2x2 802.11a/b/g/n/ac with DBS and 160
MHz, Bluetooth 5.0.
n 2 × 2 802.11ac with MU-MIMO
n DBS support
n 160 MHz bandwidth support
n Bluetooth 5.0
1.1 WLAN RF Characteristics
1.1.1 2.4 GHz WLAN Transmitter Characteristic
All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI.
MS-01 SOM Module
Page 2
Parameter
Test Conditions
Min
Typ
Max
Unit
1 Mbps DSSS (b) Rx Sensitivity
8% PER, 20 MHz
-
-96 - dBm
11 Mbps DSSS (b) Rx Sensitivity
8% PER, 20 MHz
-
-88 - dBm
6 Mbps OFDM (g) Rx Sensitivity
10% PER, 20 MHz
-
-91 - dBm
54 Mbps OFDM (g) Rx Sensitivity
10% PER, 20 MHz
-
-74 - dBm
MCS0 OFDM (n) Rx Sensitivity
10% PER, 20 MHz
-
-91 - dBm
MCS7 OFDM (n) Rx Sensitivity
10% PER, 20 MHz
-
-71 - dBm
MCS0 OFDM (n) Rx Sensitivity
10% PER, 40 MHz
-
-88 - dBm
MCS7 OFDM (n) Rx Sensitivity
10% PER, 40 MHz
-
-69 - dBm
802.11b RX Overload Level - 20MHz
8% PER, 11 Mbps
-10
- - -
802.11g RX Overload Level - 20MHz
10% PER, 54 MHz
-20
- - -
802.11n RX Overload Level - 20MHz
10% PER, MCS7
-20
- - -
Parameter
Test Conditions
Typ
Unit
6 Mbps OFDM (a) TX Output power
6 Mbps BPSK 802.11(a) Mask Compliance -5 dB
EVM RMS power over TX packet, 20 MHz
16 +/- 1.5
dBm
54 Mbps OFDM (a) TX Output power
54 Mbps 64-QAM 802.11(a) Mask Compliance 25 dB EVM RMS power over TX packet, 20 MHz
14 +/- 1.5
dBm
MCS0 OFDM (n) TX Output power, 20 MHz
6.5 Mbps BPSK 802.11(n) Mask Compliance -5
dB EVM RMS power over TX packet, 20 MHz
16 +/- 1.5
dBm
MCS7 OFDM (n) TX Output power, 20 MHz
65 Mbps 64-QAM 802.11(n) Mask Compliance 27 dB EVM RMS power over TX packet, 20 MHz
13 +/- 1.5
dBm
MCS0 OFDM (n) TX Output power, 40 MHz
13.5 Mbps BPSK 802.11(n) Mask Compliance -5
dB EVM RMS power over TX packet, 40 MHz
16 +/- 1.5
dBm
MCS7 OFDM (n) TX Output power, 40 MHz
135 Mbps 64-QAM 802.11(n) Mask Compliance 27 dB EVM RMS power over TX packet, 40 MHz
13 +/- 1.5
dBm
MCS0 OFDM (ac) TX Output power, 20
MHz
BPSK 802.11(ac) Mask Compliance -5 dB EVM
RMS power over TX packet, 20 MHz
16 +/- 1.5
dBm
MCS8 OFDM (ac) TX Output power, 20
MHz
64-QAM 802.11(ac) Mask Compliance -30 dB
EVM RMS power over TX packet, 20 MHz
12 +/- 1.5
dBm
MCS0 OFDM (ac) TX Output power, 40
MHz
13.5 Mbps BPSK 802.11(ac) Mask Compliance -5
dB EVM RMS power over TX packet, 40 MHz
16 +/- 1.5
dBm
MCS9 OFDM (ac) TX Output power, 40
MHz
180 Mbps 256-QAM 802.11(ac) Mask
Compliance -32 dB EVM RMS power over TX
packet, 40 MHz
11 +/- 1.5
dBm
MCS0 OFDM (ac) TX Output power, 80
MHz
29.3 Mbps BPSK 802.11(ac) Mask Compliance -5
dB EVM RMS power over TX packet, 80 MHz
16 +/- 1.5
dBm
MCS9 OFDM (ac) TX Output power, 80
MHz
390 Mbps 256-QAM 802.11(ac) Mask
Compliance -32 dB EVM RMS power over TX
packet, 40 MHz
11 +/- 1.5
dBm
`
1.1.2 2.4 GHz WLAN Receiver Characteristic
1.1.3 5 GHz WLAN Transmitter Characteristics
All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI.
MS-01 SOM Module
Page 3
1. Parameter
Test Conditions
Min
Typ
Max
Unit
6 Mbps OFDM (a) Rx Sensitivity
10% PER, 20 MHz
-
-92 - dBm
54 Mbps OFDM (a) Rx Sensitivity
10% PER, 20 MHz
-
-75 - dBm
MCS0 OFDM (n) Rx Sensitivity
10% PER, 20 MHz
-
-91 - dBm
MCS7 OFDM (n) Rx Sensitivity
10% PER, 20 MHz
-
-73 - dBm
MCS0 OFDM (n) Rx Sensitivity
10% PER, 40 MHz
-
-88 - dBm
MCS7 OFDM (n) Rx Sensitivity
10% PER, 40 MHz
-
-70 - dBm
MCS0 OFDM (ac) Rx Sensitivity
10% PER, 20 MHz
-
-91 - dBm
MCS8 OFDM (ac) Rx Sensitivity
10% PER, 20 MHz
-
-68 - dBm
MCS0 OFDM (ac) Rx Sensitivity
10% PER, 40 MHz
-
-88 - dBm
MCS9 OFDM (ac) Rx Sensitivity
10% PER, 40 MHz
-
-64 - dBm
MCS0 OFDM (ac) Rx Sensitivity
10% PER, 80 MHz
-
-84 - dBm
MCS9 OFDM (ac) Rx Sensitivity
10% PER, 80 MHz
-
-59 - dBm
Transmitter Performance
Packet Types
DH5
2-DH5
3-DH5
Transmitting Power
11 +/- 1.5 dB
8 +/- 1.5 dB
8 +/- 1.5 dB
Receiver Performance
Packet Types
DH5
2-DH5
3-DH5
Receiving Sensitivity
-93 dBm
-93 dBm
-86 dBm
`
1.1.4 5 GHz WLAN Receiver Characteristics
2. Bluetooth RF Characteristics
MS-01 Integrated Qualcomm WCN3990 to Support Bluetooth 5.0 and is backwards compatible with
previous BT standard revisions.
2.1 Bluetooth RF Characteristics
The following tables show the Bluetooth transmitting and receiving performance
All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI.
MS-01 SOM Module
Page 4
`
OEM/Integrators Installation Manual
Important Notice to OEM integrators
1. This module is limited to OEM installation ONLY.
2. This module is limited to installation in mobile or fixed applications, according to Part 2.1091(b).
3. The separate approval is required for all other operating configurations, including portable
configurations with respect to Part 2.1093 and different antenna configurations
4. For FCC Part 15.31 (h) and (k): The host manufacturer is responsible for additional testing to verify
compliance as a composite system. When testing the host device for compliance with Part
15 Subpart B, the host manufacturer is required to show compliance with Part 15 Subpart B while the
transmitter module(s) are installed and operating. The modules should be transmitting and the
evaluation should confirm that the module's intentional emissions are compliant (i.e. fundamental
and out of band emissions). The host manufacturer must verify that there are no additional
unintentional emissions other than what is permitted in Part 15 Subpart B or emissions are complaint
with the transmitter(s) rule(s).
Antenna Installation
(1) The antenna must be installed such that 20 cm is maintained between the antenna and users,
(2) The transmitter module may not be co-located with any other transmitter or antenna.
(3) To comply with FCC/IC regulations limiting both maximum RF output power and human exposure
to RF radiation, the maximum antenna gain including cable loss in a mobile exposure condition must
not exceed:
Standalone Condition:
。 1.44 dBi in 2.4 GHz Band
。 2.16 dBi in 5.2GHz Band
。 2.16 dBi in 5.3GHz Band
。 2.16 dBi in 5.5GHz Band
。 2.16 dBi in 5.8GHz Band
In the event that these conditions cannot be met (for example certain laptop configurations or colocation with another transmitter), then the FCC/IC authorization is no longer considered valid and
the FCC ID/IC ID cannot be used on the final product. In these circumstances, the OEM integrator will
be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate
FCC/IC authorization.
All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI.
Loading...