Universal Flow Monitors (UFM) CoolPoint Data sheet
UNIVERSAL
F L O W M O N I T O R S
®
Maximum fl ow ranges from 25-200 GPM (95-750 LPM)
Max pressure 300 PSI (20 Bar)
Temperature range 32-210°F (2-99°C)
CP 3/4-2 inch
UNIVERSAL®
Flow Monitors
Vortex
Shedding
Flowmeter
Rotatable Enclosure
Description
This fl owmeter is made for water, water/glycol coolant
or low viscosity fl uids.
It has the following features:
• Flow rate transmitter 4-20 mA
• Solid state relay can be confi gured as alarm or
pulse out
• LED digital display
• No moving parts to clog or wear
• Certifi ed CSA and CE
• Rotatable enclosure optional for orientation of
reading or electrical connection
Electrical Specifi cations
• Input Power: 10 - 30 VDC @ 80 mA
• Output: 4-20mA for fl ow with 100 pulses per gallon
from the solid state relay for all units except for the
2 inch CP16 which is 25 pulses per gallon
• Electrical Connection
Pin Connector (standard)
Pigtails (optional)
Junction Box with terminal strip (optional)
Material Specifi cations
Flow bodies of brass or 316 Stainless Steel with
PVDF sensors and Viton® seals standard. PEEK
sensors used for high temp for fl uids above 150° F.
™
CoolPoint
CoolPoint™ with
option
User-Confi gurable Options
Features that are selectable on 4-20 mA units include:
• Selectable alarm state (N.O. or N.C.)
• Set point or pulse output
• Engineering units (GPM, LPM)
Instrument Specifi cations
• Flow
Visual readout: 3 digit LED, 0.3" digit height
Deadband for Alarm: 5% of full scale (maximum
fl ow)
Accuracy: ±2% of full scale (maximum fl ow)
Repeatability: ±.25% of indicated fl ow
Turndown (ratio of max to minimum fl ow rates):
10:1 at all temperatures and 20:1 available
optionally for standard temperatures.
• Pressure
300 PSIG (20 Bar) operating pressure
• Response time
450 ms.
• General
Fluid temperature limits: 35-150° F (2-66° C)
standard, 150-210° F (66-99° C) optional.
Enclosure rating: IP 65, Type 1, 3, 4, 12 and 13
• Pipe Connections:
Female NPT, BSPP & BSPT
• Back pressure of 10 PSIG required.
(See manual for elevated temperature.)
Viton® is a registered trademark for DuPont Performance Elastomers.
How To Order Select the appropriate symbols to build a model code:
MODEL CODES
Flow maximum Pipe size Model code Material Thread options Connector or conduit Special options
GPM (LPM) in inches available box options available
Standard
25 (95) 3/4 CN6 -M1*=Brass
50 (90) 1 CN8 -M2=316 Stainless Steel
100 (380) 1 1/2 CN12 T1*=NPT C1*=Pin connector
200 (750) 2 CN16 T2=BSPT C2=Pig tails
T3=BSPP C3=Conduit box, terminal strip W1=20:1 extended turndown***
Rotatable Heads** E20=High temp (150-210° F)
25 (95) 3/4 CP6
50 (90) 1 CP8
100 (380) 1 1/2 CP12
200 (750) 2 CP16
* Indicates default selection. If no selection is made, this
option is assumed.
** Rotatable head option allows control box to be rotated
270° in fi eld for readability.
*** Requires grounded wiring.
*** Turndown is 20:1 standard temp.
Example: CPN12 is the same as CPN12-M1T1C1
PRESSURE DROP
12
10
8
5
2
1
.5
.2
.1
PRESSURE DROP (PSID)
.05
.3
12GPM
25GPM
50GPM
.6 1 2 5 10 25 100
FLOW (GPM)
100GPM
200GPM
15 50 200 300
250 500
1000
750
500
350
200
100
50
35
MILLIBAR
20
10
5
3.5
380LPM
760LPM
45LPM
95LPM
190LPM
25102050 200 600
30 100 300 800
FLOW (LPM)
1200
1500
2000
2
Loading...