Universal Enterprise TACH2 User Manual

TACH2

Tachometer

Dual measurement modes,

contact or non-contact

Features

• Data hold

• Auto power off after 20 minutes inactivity

• Low battery indicator

• Selectable velocity units for contact measurements

• Removable Head • Non-contact IR RPM Measurement

• Contact Tip RPM Measurement • Contact Wheel RPM Measurement

1.800.547.5740 • WWW.UEITEST.COM

Includes

TACH2 • CONTACT / NON-CONTACT TACHOMETER

The UEi TACH2 measures rotational speed using
either contact or non-contact methods. Measurements
of RPM’s up to 99,999 are possible, with resolution
automatically changing throughout the range. The
TACH2 will also measure surface velocity using the
included contact wheel.

• 9V battery

• Operation manual

• Cone & funnel contact tips

• Reflective tape (Non-contact mode) - ART1

Specifications

Measuring Range Resolution

10.000~99999 RPM 0.001/0.01/0.1/1

1.0000~9999.9 M/MIN 0.0001/0.001/0.01/0.1

3.0000~30000 FT/MIN 0.0001/0.001/0.01/0.1

1.0000~10000 YD/MIN 0.0001/0.001/0.01/0.1

Accuracy ±(0.1% of rdg. + 2 digits)

Measuring distance 2”~11.8” (5~30cm) from target (Non-contact RPM)

Time base 4.0Mhz Quartz Crystal

Sampling time 1 sec. (>60rpm)

>1 sec. (10~60rpm)

Operating Temperature 0~50°C (32~122°F)

Operating Humidity Max. 80% RH.

Power Supply 9V battery

Power Consumption 5μA (Idle)

18mA (Measurement)

USA

1-800-547-5740 • Fax: [phone]

www.ueitest.com • Email: [e-mail]
8030 SW Nimbus Ave.
Beaverton, OR 97008

Copyright © 2014 UEi. All Rights Reserved

CANADA

1-877-475-0648 • Fax: [phone]

www.ueitest.com • Email:[e-mail]
150-13571 Verdun Place
Richmond, B.C. V6V 1W5

EUROPE

[phone] • Fax: [phone]

04/14

PLEASE

RECYCLE