Universal Enterprise 383B User Manual

A

LL

I

N

O

NE

K

IT

383B/CATA2KIT

DM383B Digital Multimeter

• 750 Volts AC & 1000 Volts DC

• 10 Amps AC & DC

• Resistance to 40 Megohms

• Diode check function

• Continuity

• Max capture mode

• Data hold

The 383B/CATA2KIT combines the most commonly used test instruments in a
convenient foam lined carrying case, protecting the instruments while keeping
them readily available for testing needs.

CA383B AC Clamp-On Adapter

• 300A AC

TA2K Differential Temperature Adapter

• T1, T2 or T1-T2

Two 4' K-type Temperature Probes

AC504 Hard Carrying Case

Function Range Accuracy

DC Vo l t s 400mV, 4V, 40V, 400V, 10 0 0 V ±(0.5% Reading +1 Digits)
AC Vo l t s 400mV, 4V, 40V, 400V ± ( 1.5% Reading +3 Digits)
50 - 500 Hz 750 V ±(2.0% Reading +4 Digits)

400µA, 4mA, 40mA, 400mA ± ( 1 .0% Reading +2 Digits)

DC Current 4 A ± ( 1.5% Reading +2 Digits)

10 A ±(2.0% Reading +2 Digits)
AC Current 400µA, 4mA, 40mA, 400mA ± ( 1 .5% Reading +3 Digits)
50 - 500 Hz 4 A ±(2.0% Reading +3 Digits)

10 A ±(2.5% Reading +4 Digits)
R e s i s t a n c e 4 0 0 Ω, 4kΩ, 40KΩ, 400KΩ, 4MΩ ±(0.8% Reading +2 Digits)

4 0 M Ω ±(2.0% Reading +3 Digits)

Copyright © 2006 UEi Specifications are subject to change without notice. L628 3/06

383B/CATA2KIT • All In One Kit

Distributed By:

1-800-547-5740 • Fax: [phone]
www.ueitest.com • Email: [e-mail]

IN CANADA

Vancouver: Phone: [phone] • [phone] • Fax: [phone]
Toronto: Phone: [phone] • Fax: [phone]

IN EUROPE

Phone: [phone] • Fax: [phone]

PLEASE

RECYCLE

DM383B Specifications

The DM383B offers more than just economy and solid value in an industrial-quality digital multimeter. The
extra-large, 4000-count display makes the readings easier to see, plus the range and function indicators
provide you with more on-screen information.

DM383B Digital Multimeter

• Measures up to 1000V DC, 750V AC, Amps, Resistance
and Continuity

• Diode check function

• 3-3/4 digit, 400-count display

• MAX capture mode

• Data Hold

• Low battery indication

• On-screen range and function indicators

• Ruggedized to withstand a 10’ drop

• Five year limited warranty

CA383B Clamp-On Adapter

• 300 Amps AC

• Max. jaw opening 1-1/2” (30mm)

• Dimensions: 3.1 x 6.1 x 1.4” (80 x 156 x 35mm)

• Output: 1mV AC per 0.1 Amp AC

• One year limited warranty

TA2K Dual Input Adapter

Converts any multimeter with .001 Volt DC mV into a dual
input temperature tester. Adapter plugs directly into
DMM’s that use 4mm jacks

• -40˚ to 1200˚F (4.4˚ to 649˚C)

• Display T1, T2 or ∆T (T1-T2)

• One year limited warranty

Maximum voltage on ground terminal

Digital display

Storage temperature

Operating temperature

Altitude

Relative humidity

Temperature coefficient

Battery type

Battery life (typical)

Size (H x W x L, w/boot)

Weight (approximate w/boot)

Drop test

Safety standards

600V

4000 count - updates 4 times per sec

-4 to 140˚F (-20 to 60˚C)
32 to 113˚F (0 to 45˚C)

<6560’ (2000 M)

0% to 80% at 32 to 95˚F (0 to 35˚C)

0% to 70% at 95 to 113˚F (35 to 45˚C)

0.1 X (specified accuracy)/˚C

When ambient temperature is

<64˚F or >82˚F (<18˚C or >28˚C)

9V, NEDA 604 or 6LR 61

80 hours (alkaline)

7 3/4” x 3 7/8” x 2”

1 lb. 2 oz. (510g)

10’

IEC1010-1

(600 Volts overvoltage category III)

(1000 Volts overvoltage category II)

and the EMC directive

General Specifications at 64˚ to 82˚F