Universal Electronics 72400C User Manual
CRESTRON
TPMC-4XG
TPMC-4XG provides fully-customizable control of all of your home theater,
home automation and digital media content. Its touch-sensitive screen is
software-based, so your installer/integrator can include just those controls
you actually use.
Before You Use TPMC-4XG
Please ensure your TPMC-4XG is fully charged before use.
TPMC-4XG Universal
Controller
To charge your TPMC-4XG:
1. Connect the power adapter to the
charging cradle and plug the adapter
into a wall outlet.
2. Plug in the battery, power on (On is to
the left), and dock TPMC-4XG to
begin charging the battery. If it has not already been charged, it will take 34 hours to fully charge the battery the first time.
Recharging TPMC-4XG
TPMC-4XG includes a Lithium-ion rechargeable battery. TPMC-4XG beeps
and displays a warning message when the battery is running low. You should
dock TPMC-4XG at this time to charge the battery
.
You can dismiss the warning message by clicking OK; if you do so and the
battery power becomes critically low,
TPMC-4XG will beep and display a
critical low battery warning message. You cannot dismiss this message and
should dock TPMC-4XG immediately.
To dock TPMC-4XG, simply set the controller in the charging cradle. When
it is correctly docked, the blue light will appear on the cradle.
Charging Cradle
AC Power
Adapter; varies
by country
About Battery Life
As with all battery-operated devices, battery life will vary depending on
use. It is a good practice to keep TPMC-4XG in its charging cradle when
you are not using it.
Loading...