!
!
!! ! ! ! !
!
!
!
!
! ! ! ! ! ! ! !! ! ! !!!
GET SOME AIR BAND® www.maagaudio.com
Thank you for using the Mäag Audio EQ4 plug-in.
The EQ4 plug-in is Mäag Audio’s first plug-in release.
Modeled in close cooperation with Brainworx, and
based upon Mäag Audio’s 500 series module
designed by Cliff Maag Sr.
The EQ4 is the successor of the famous EQ3 by NTI,
developed by Cliff many years ago.
The Mäag EQ4 is the go-to vocal EQ for David
Reitzas, Dylan Dresdow, Dave Pensado, to mention
just a few (Madonna, Celine Dion, Black Eyed Peas,
Justin Timberlake, Barbara Streisand, etc.).
The sweepable AIR BAND® and the SUB band set a
new standard for shiny and open high-end and tight
low-end in both the analog and digital domain. You
can hear the AIR BAND® on vocals and the master
buss of countless top hits mixed by David Reitzas,
Dylan Dresdow, Dave Pensado, and many others ...
The basic concept of the EQ4
The EQ4 provides unparalleled transparency and
top end presence while maintaining the true
natural sound behind the signal or mix.
EQ adjustments are obtained with
minimal phase shift and all of the band passes
including the AIR BAND® interact with each
other during the summing process.
Adjusting the gain in any band will affect the
overall gain of the signal. This is normal
behavior and a necessary byproduct of the
design.
You may use the added LEVEL TRIM (plug-in
version only) to turn down overall gain to
compensate for this.
Overall Gain control (hardware & software):
The summing of the band passes and the AIR BAND
is an essential part of the design which ensures that
the integrity of the input signal is maintained. If you
turn all five band pass knobs equal amounts the EQ4
will retain the same EQ shape.
So, two clicks down on all five gain knobs gives you the
same EQ curve, just lower level. This means instead of
boosting one band you may also turn down the other
four, and get the same result.
Or just use the LEVEL TRIM on the plug-in to reduce
the overall gain (plug-in version only).
Understanding how the band passes and the AIR
BAND® interact in the Mäag Audio EQ4 will help you
better shape your sound.
!
!
!! ! ! ! !
!
!
!
!
! ! ! ! ! ! ! !! ! ! !!!
GET SOME AIR BAND® www.maagaudio.com
Formats
The UAD-2 Mäag EQ4 plug-in can be installed and
operated like any other UAD-2 plug-in. Please check
www.uaudio.com for general info about the system
requirements, etc.
General Tip
Start using the EQ4 plug-in on a vocal channel or a
complex stereo mix to get a feel for the EQ4 and the
AIR BAND®.
Presets
We have added a number of useful presets you may
want to browse through as a starting point.
SUB (10Hz)
This band controls the ultra-low sub frequencies.
If you need to get rid of some rumbling this is the
band to turn down, and if your mix can use some
really low kick or bass try increasing this extraordinary low band.
40Hz
The 40 Hz band opens up low end in mixes,
makes bass drums bigger and electric bass
smoother when boosted.
160 Hz
Reduce here to make voices less resonant, or add
160 Hz to get that low narrator sound. Cutting
160 Hz on instruments can help bass and bass
drum punch through in rock or pop mixes.
650 Hz
Boosting this band on vocal tracks will make them
more understandable, whereas cutting this band will
make them less direct. Boosting this band on the
master will also add some power to a mix without
making it too aggressive in the high frequencies.
2.5 kHz
A very important band to control the bite of vocals,
the aggression in rock guitar sounds, or the midrange
in general for complex mixes.
AIR BAND®
sweepable frequencies: 2.5, 5, 10, 20 & 40 kHz
Add some shiny highs to your original signal and hear
how almost every signal will open up and benefit from
this band. The higher frequency you select the
smoother high-end sound you get.