Unitron Johansson TITANIUM 8700, Johansson TITANIUM 8701 User Manual

User Manual

TITANIUM

COMPACT SATELLITE HEADEND

Ref. 8700 - 8701

8700 – 8701 TITANIUM

1

Contents

1. Introduction ................................................................................................................................ 2

1.1. Product description ..................................................................................................... 2

1.2. Typical installation ...................................................................................................... 2

1.3. Package contents ........................................................................................................ 3

1.4. Product dimensions .................................................................................................... 3

1.5. Mounting ..................................................................................................................... 4

2. Configuring the Titanium using the web interface .................................................................. 5

MINIMAL SYSTEM REQUIREMENTS ........................................................................................ 5

LOGGING IN TO THE DEVICE ................................................................................................. 5

CONNECTING THE MODULE(S) TO A NETWORK ................................................................... 7

DEVICE CONFIGURATION ...................................................................................................... 7

1. Login ........................................................................................................................... 7

2. Overview ..................................................................................................................... 8

3. Input ......................................................................................................................... 10

4. Output....................................................................................................................... 12

5. CAM........................................................................................................................... 14

3. Technical Specifications ........................................................................................................... 15

4. Safety Instructions .................................................................................................................... 16

5. Conditions of warranty ............................................................................................................ 17

No part of this manual may be copied, reproduced, transmitted, transcribed or
translated into any language without permission.

Unitron reserves the right to change the specifications of the hardware and software
described in these manuals at any time.

Unitron cannot be held liable for any damages resulting from the use of this
product. Specifications are subject to change without notice. 11/17

© Unitron - Frankrijklaan 27 - B-8970 Poperinge - Belgium

T [phone] F [phone]
email [e-mail]

www.unitrongroup.com

8700 – 8701 TITANIUM

2

1. INTRODUCTION

1.1. Product description

The Titanium is a compact satellite headend with 4 (Ref. 8700) or 8 (Ref. 8701)
tuners. It is a transmodulator with 4 output MUXs (DVB-T/DVB-C). The standalone
module with built-in power supply allows for very fast installation. The Titanium has 2
CI slots for CAM cards.

ATTENTION! The Titanium should be wall-mounted.
For ventilation purposes, leave a minimum of 15 cm around all sides of the
module.

1.2. Typical installation

The Titanium can be used to provide high quality satellite television in a wide range
of projects, both in the hospitality as in the residential market. Typical buildings or
infrastructures where the Titanium can be used include, but are not limited to:

- Hotels, hostels, bed and breakfasts, holiday parks

- Hospitals, rest homes, prisons

- Large and small multi-dwelling units with an international public, settlements

- Maritime infrastructure such as boats, yachts, barges

8700 – 8701 TITANIUM

3

1.3. Package contents

- 1 x Titanium (ref. 8700 or 8701)

- 1 x 75 Ohm terminators

- 1 x Mains cable (1,80 m)

1.4. Product dimensions

8700 – 8701 TITANIUM

4

1.5. Mounting

Proper installation is critical to system performance. It is particularly important to
install the Titanium correctly in order to receive and distribute optimal signal quality.

- Mount the Titanium to a wall in a well ventilated and cool room.

For ventilation purposes, leave a minimum of 15 cm around all sides of
the module.

- Plug the 4 satellite cables in the SAT 1-4 ports.

- If the Titanium should receive RF signal from another Titanium or an external

source, connect a coaxial cable to the RF IN port. If not applicable, insert a 75
Ohm terminator in the RF IN port.

- Connect the coaxial TV network to the RF out port.

- If the Titanium is configured to read CAM cards, insert 1 or 2 CAM cards* and

smart cards* in the slots on the backside of the Titanium.
(*Not included with the Titanium).

- Power the Titanium with the mains cable.

Once it is powered, a RED POWER LED will start blinking. When the LED stops
blinking and turns BLUE, the module is completely booted and ready for
configuration. This will take approximately 4 minutes.

- For configuration of the module, the web interface must be accessed.

Therefore, plug an Ethernet cable in the control port, and the other end in a
computer.

- More information about configuration of the Titanium module can be found in

the next section

8700 – 8701 TITANIUM

5

2. CONFIGURING THE TITANIUM USING THE WEB

INTERFACE

MINIMAL SYSTEM REQUIREMENTS

The WebGUI is supported by the following web browsers:

- Google Chrome

- Mozilla Firefox

- Internet Explorer

- Safari

Make sure to use the most recent version of the browser. When using a different
browser, we cannot guarantee a correct functioning of the interface.

LOGGING IN TO THE DEVICE

Plug one end of an Ethernet cable in the control port and the other end in a computer.
Once the Titanium is powered and fully booted, the module is reachable and ready to
be configured.

For a more reliable WebGUI connection, we advise to use fixed IP or DCHP.
Therefore, carefully follow the steps below:

1. Set the computer to obtain an automatic IP address as explained in the

following procedure (for Microsoft Windows10®)

o Navigate to the Control Panel (Start  Control Panel).
o Enter the Network and Sharing Center and go to the Adapter Settings
o Right-click on the Local Area Connection and choose Properties.

o Double click Internet Protocol Version 4 (TCP/IPv4) to enter the IP

settings of your adapter.

o Make sure the ‘Obtain an IP address automatically’ checkbox is

selected.

o Click OK to save the settings.