User Manual
HDMI Streamer
Ref. 8210
HDMI Streamer (Ref. 8210)
2
CONTENTS
1. PRODUCT DESCRIPTION .................................................................... 3
2. HDMI STREAMER APPLICATIONS .......................................................... 4
3. INSTALLATION OF THE HDMI STREAMER ................................................ 5
4. TECHNICAL SPECIFICATIONS ............................................................. 9
5. SAFETY INSTRUCTIONS .................................................................. 10
6. CONDITIONS OF WARRANTY ............................................................. 11
No part of this manual may be copied, reproduced, transmitted, transcribed or translated into any language
without permission.
Unitron reserves the right to change the specifications of the hardware and software described in these manuals
at any time.
Unitron cannot be held liable for any damages resulting from the use of this product. Specifications
are subject to change without notice. 9/19
© Unitron - Frankrijklaan 27 - B-8970 Poperinge - Belgium
T +32 57 33 33 63 F +32 57 33 45 24
email sales@unitrongroup.com
www.unitrongroup.com
HDMI Streamer (Ref. 8210)
3
1. PRODUCT DESCRIPTION
Put an HDMI stream on your (local) network
• The Johansson HDMI Streamer is designed for small to medium-sized
projects
• It is a High Definition Video and Audio Encoder that makes it easy to put
your HDMI source on a (local) network and/or internet
• This gives the end-user the flexibility to see your real-time video content on
their preferred (mobile) device: smartphone, tablet, laptop or TV
• The end-user can simply surf to a dedicated webpage or streaming service
• No need to install a mobile application or additional software, it works on
any web browser
• Interesting for local video (surveillance cams, digital signage,
advertisements, info channel, creating your own local broadcast, etc) and for
streaming to live platforms (e.g. Facebook Live, YouTube Live, Ustream,
Wowza, etc).
The 8210 has multiple functionalities:
• Enable a HDMI source on your local network using the built-in webpage
(HLS unicast)
• Multicast a HDMI source for an IPTV application (UDP multicast)
• Publish your live stream to an online platform (RTMP)
• HDMI loop-through for simultaneous viewing on a local TV
HDMI Streamer (Ref. 8210)
4
2. HDMI STREAMER APPLICATIONS
HDMI Streamer (Ref. 8210)
5
3. INSTALLATION OF THE HDMI STREAMER
3.1. Minimal system requirements
The following web browsers support the module interface: Chrome; Safari; Firefox; Internet
Explorer. When using a different browser, we cannot guarantee a correct functioning of the
interface.
3.2. Starting up the module
Connect all cables needed for your installation.
For the first set-up, it is advised to connect an Ethernet cable directly to your PC (without
using a switch).
• After powering the HDMI Streamer, wait until the power led turns green (this can take
up to about 2 minutes). Once the power led is green, the unit can be accessed through
the WebGUI. The unit uses 192.168.50.50 as the default static IP address. Therefore,
you will need to set-up a static IP in your PC that matches the subnet of the device. For
example 192.168.50.25.
Windows 7
Go to start Control Panel Network and
Internet Network and Sharing Center
Change Adapter Settings.
Right-click on “Local Area Connection” and then
on “Properties”.
Windows 8
Open the windows 8 start screen by pressing the
start button. Type “Control Panel” and press
enter. Then go to “Network and Internet”
“Network and Sharing Center” “Change
Adapter Settings”. Right-click on “Local Area
Connection” and then on “Properties”.
Double click on “Internet Protocol Version 4
(TCP/IPv4)” to enter the IP settings of your
adaptor.
HDMI Streamer (Ref. 8210)
6
Check the button “Use the following IP address”
and enter an IP and subnet mask.
You can leave the Default gateway and DNS
settings empty.
Open your browser and surf to the website http://192.168.50.50.
If everything went fine you will see the following webpage, if not check your network settings
and try again.
Alternatively, the webpage can default also be accessed via http://start but also in this case
your PC needs to be in the same subnet.
HDMI Streamer (Ref. 8210)
7
1. To log in to the device: connect the HDMI Streamer to a local network
and go to http://192.168.50.50/admin/
2. Device: The following screen with general information will appear:
3. Inputs: Define the encoder settings for the HDMI input
HDMI Streamer (Ref. 8210)
8
4. Outputs: Select multicast transport protocol: RTP or UDP
For live streaming, enable the service and define the RTMP address:
RTMP address: URL + private key
e.g. youtube: rtmp://a.rtmp.youtube.com/live2/qxjd-uaps-zfk6-550v
To add multiple Hosts (streams), add the IP adresses (from the same
network) and separate with a comma (e.g. 192.168.50.51,192.168.50.52,
192.168.50.53).
Make sure the IP addresses are in the same network.
5. End-user page: Select Live Streams in admin menu or go to
http://192.168.50.50
Factory reset:
Go to Device > Factory reset, or press the small button next to the DC input
on the HDMI Streamer for 5 seconds. When the HDMI Streamer is resetting,
the power LED will blink.
HDMI Streamer (Ref. 8210)
9
4. TECHNICAL SPECIFICATIONS
Parameter
Unit
Value
Inputs
-
1 x HDMI
Outputs
-
1x IP Ethernet RJ-45 jack (for streaming + WebGUI)
1 x HDMI (loop-through)
HDMI input
-
Video resolution : 576i up to 1080p
Video encoding : H264/AVC
Video bitrate Encoding: from 1 Mbps to 30Mbps
Audio encoding : AAC/MPEG2
Audio bitrate Encoding 32 -192 Kbps
Streaming port
Mbps
10/100
Ethernet OTT
encapsulation
-
HLS (Apple HTTP Live Streaming) (unicast)
Ethernet multicasting
-
Possible to output UDP multicast
Simultaneous users
-
Up to 30
(depending on the bitrate and the network infrastructure)
Input resolution
-
Up to 1080p60
Supported playback
All HTML 5 browsers on Android/iPhone/Mac/PC/SmartTV/…
No need to install mobile application or additional software
Configuration
-
Network/login/input encoder settings/output multicast settings
Power consumption
W
5
Operating
temperature
°C
0 to +50 (for indoor use only)
Dimensions
mm
155 x 120 x 50 mm
Weight
Kg
0.6
HDMI Streamer (Ref. 8210)
10
5. SAFETY INSTRUCTIONS
Read these instructions carefully before connecting the unit
To prevent fire, short circuit or shock
hazard:
• Do not expose the unit to rain or moisture.
• Install the unit in a dry location without infiltration or condensation of water.
• Do not expose it to dripping or splashing.
• Do not place objects filled with liquids, such as vases, on the apparatus.
• If any liquid should accidentally fall into the cabinet, disconnect the power plug.
To avoid any risk of
overheating:
• Install the unit in a well aery location and keep a minimum distance of 15 cm around the
apparatus for sufficient ventilation
• Do not place any items such as newspapers, table-cloths, curtains,
on the unit that might cover the ventilation holes.
• Do not place any naked flame sources, such as lighted candles, on the apparatus
• Do not install the product in a dusty place
• Use the apparatus only in moderate climates (not in tropical climates)
• Respect the minimum and maximum temperature specifications
To avoid any risk of electrical
shocks:
• Connect apparatus only to socket with protective earth connection.
• The mains plug shall remain readily operable
• Pull out power plug to make the different connections of cables
• To avoid electrical shock, do not open the housing of adapter.
Maintenance
Only use a dry soft cloth to clean the
cabinet.
Do not use solvent
For repairing and servicing refer to qualified
personnel.
Dispose according your local authority’s recycling processes
HDMI Streamer (Ref. 8210)
11
6. CONDITIONS OF WARRANTY
Unitron N.V. warrants the product as being free from defects in material and
workmanship for a period of 24 months starting from the date of production indicated on
it. See note below.
If during this period of warranty the product proves defective, under normal use, due to
defective materials or workmanship, Unitron N.V, at its sole option, will repair or replace the
product. Return the product to your local dealer for reparation
THE WARRANTY IS APPLIED ONLY FOR DEFECTS IN MATERIAL AND WORKMANSHIP
AND DOES NOT COVER DAMAGE RESULTING FROM:
• Misuse or use of the product out of its specifications.
• Installation or use in a manner inconsistent with the technical or safety standards in
force in the country where the product is used
• Use of non-suitable accessories (power supply, adapters...).
• Installation in a defect system.
• External cause beyond the control of Unitron N.V. such as drop, accidents,
lightning, water, fire, improper ventilation…
THE WARRANTY IS NOT APPLIED IF
• Production date or serial number on the product is illegible, altered, deleted or
removed.
• The product has been opened or repaired by a non-authorized person.
NOTE
Date of production can be found in the product’s serial number code. The format will either be
“YEAR W WEEK” (e.g., 2018W01 = year 2018 week 1) or “YYWW” (e.g., 1847 = year 2018
week 47).
UNITRON NV
Frankrijklaan 27
B-8970 Poperinge
Belgium
T +32 57 33 33 63
F +32 57 33 45 24
sales@unitrongroup.com
www.unitrongroup.com
Loading...