UniTraQ MT900 C L U M User Manual

Mini Tracker Model: MT-900C
GSM/GPRS/WCDMA/HSPA
GPS Mini Tracker
MT-900C
USER MANUAL
UniTraQ International Corp. All right reserved, © 2012
UniTraQ International Corp. RoHS compliance. 2012,07, Version 1.3 1
2F., No.136, Ziqiang S. Rd., Zhubei City, Hsinchu County 30264, Taiwan (R.O.C.)
TEL886-3-6578491 FAX886-3-6578492
MADE IN TAIWAN
Mini Tracker Model: MT-900C
Contents
1. Introduction....................................................................................................................... 3
2. Features........................................................................................................................... 3
3. Applications......................................................................................................................3
4. Version Compliant Information......................................................................................... 4
5. Electrical Specifications....................................................................................................4
5.1 General Specification.................................................................................................. 4
5.2 Wireless Interface Specification.................................................................................. 5
5.3 GPS Specification....................................................................................................... 5
6. Device Description ...........................................................................................................6
7. Battery Charging and USB Interface................................................................................ 6
7.1 Battery Charging......................................................................................................... 6
7.2 Parameters Setting..................................................................................................... 7
8. Button/Switch Indication...................................................................................................7
9. LED Indication.................................................................................................................. 7
9.1 Power On/Off and Idle status...................................................................................... 7
9.2 GPS Status ................................................................................................................. 7
9.3 Mobile Status.............................................................................................................. 8
9.4 Charging Status.......................................................................................................... 8
9.5 Emergency Alarm ....................................................................................................... 8
10. Device Installation............................................................................................................ 8
10.1 How to insert SIM card.............................................................................................. 8
10.2 How to take out SIM card.......................................................................................... 8
11. Device Configuration......................................................................................................10
11.1 USB driver installation procedure........................................................................... 10
11.2 Min Tracker Setting description.............................................................................. 13
11.3 Upgrade Firmware.................................................................................................. 14
11.4 Power saving mode/Idle mode ............................................................................... 16
11.5 Short Message Service Control.............................................................................. 16
UniTraQ International Corp. RoHS compliance. 2012,07, Version 1.3 2
Mini Tracker Model: MT-900C
1. Introduction
The MT-900C is a portable compact tracking device for personal safety and asset monitoring. It combines high sensitivity GPS and 3G mobile interface to perform the powerful security application. The MT-900C can, based on quad band GSM/GPRS and WCDMA/UMTS/HSPA network and GPS satellite positioning system, track far-way objects conveniently by Short Message or internet. With the compact size and powerful functions, it can be used for child protection, anti-kidnapping, vehicle tracking, pets go out tracking, panic as sistant for the aged, and much more.
2. Features
3.75G WCDMA/UMTS/HSPA commun ication s  Available Quad band GSM/GPRS 850/900/1800/1900 MHz  GPS 50 channels all-in-view tracking with AGPS supported.  GPS high sensitivity -162 dBm.  Real time dynamic reporting based on time interval.  Data logger capability built in with 4Mega bytes flash memory to record time stamp,
position and event status.
3D G-sensor to report motion sensing, accident from ±4G.  Remote command control by SMS or GPRS/EDGE/3G network (supporting TCP/UDP).  Cell ID positioning supporting  Emergency call and notification, plus SMS sending location.  Geo-fence capability with out of fencing notification.  Over speed notification capability.  Low battery notification capability.  Power management for low power consumption. 
Surrounding audio monitoring capability.(option for MT-900CE, CA, not CF)
Mini USB for charging and data exchanging.  Personal service center program support.  Over the air(OTA) firmware update
3. Applications
 Personal safety  Security – safety of security guard, locate asset  Asset unauthorized movement detection  Child care – locate missing kids, track whereabouts of children  Disables’ safety – seniors’ safety
UniTraQ International Corp. RoHS compliance. 2012,07, Version 1.3 3
Mini Tracker Model: MT-900C
 Vehicle tracking  Outdoor recreation – travel, hiking, bike riding  Animal tracking – track pets’ location
4. Version Compliant Information
(1) Hardware: 0.1 (or last version). (2) Firmware: MT900C Standard version 1.0.0 (mt900c_std_v1.0.0).
5. Electrical Specifications
5.1 General Specification
Parameter Specification Operating Voltage 3.4 V Operating Temperature -20 ~ +60 ℃℃ Storage Temperature -40 ~ +85 ℃℃
Power Consumption
Battery 500mAh USB Power Input 5V, 500mA Battery Volt age Min:3.4V, Typ:3.7V, Max:4.2V SIM card type 1.8V, 3V SIM card Holder type Push-Push type LED Status Indicator Charge/Power/ Mobile/GPS Dimension 53 x 37 x 20 mm Weight
Normal 180 mA Idle mode < 3mA (with mobile idle)
39g
UniTraQ International Corp. RoHS compliance. 2012,07, Version 1.3 4
5.2 Wireless Interface Specification
Parameter Specification
Mini Tracker Model: MT-900C
UMTS/WCDMA/HSPA
900/2100 MHz (MT-900CE) 850/1900 MHz (MT-900CA) 800/850/900/1700/1900/2100MHz (MT-900CF) Up to 5.76 Mb/s uplink, 7.2 Mb/s downlink
GSM 850 / 900 / 1800 / 1900 Mhz
Class B Mobile Station PBCCH, USSD support
GPRS Multislot Class 12, CS1-CS4
up to 85.6 kb/s
EDGE Multislot Class 12, MCS1-MCS9
up to 236.8 kb/s SMS MT/MO, Text and PDU mode supported Protocol support TCP/UDP Current consumption (at VCC=3.8V)
Idle mode :<2 mA
GSM:< 250 mA
GPRS < 660mA
EDGE < 460 mA
HSDPA < 670 mA
5.3 GPS Specification
Parameter Specification Protocol NMEA 0183 Ver2.3
Receiver channels / Fixing method
Acquisition sensitivity -148 dBm Tracking sensitivity -162 dBm Receiver frequency 1575.42MHz L1 C/A Code Accuracy
(1)Position (2)Datum
Time To First Fix
(1)Cold start (2)Hot start Dynamic condition 4G (39.2m/sec2)
50 channels all in view
2.5m CEP WGS-84
26 Sec(typ) 1 Sec(typ)
UniTraQ International Corp. RoHS compliance. 2012,07, Version 1.3 5
6. Device Description
(1). Strap Hole
Mini Tracker Model: MT-900C
Picture 1
(2). Mini USB Slot and Power Switch Button (3). SIM card Slot (4). SOS Button (5). GPS Status Indicator (6). Mobile Status Indicator (7). Power Indicator (8). Charging Indicator (9). MIC Receiver (Option)
7. Battery Charging and USB Interface
7.1 Battery Charging
NOTE: Please turn off the power while mini tracker is on charging. If you keep the power on, the battery is not able to be fully charged.
(1) Charging by a computer USB port:
Connect the supplied USB cable between the computer USB port and the mini USB connector of the MT-900C device.
(2) Charging by a cigarette lighter power adapter:
a. Plug the USB connector of the supplied USB cable to the USB connector of the cigarette
lighter power adapter.
b. Connect the mini USB plug of the USB cable to the mini USB port of the MT-900C device.
UniTraQ International Corp. RoHS compliance. 2012,07, Version 1.3 6
Mini Tracker Model: MT-900C
(3) Charging by AC adapter:
Connect the supplied AC adapter to the mini USB port of the MT-900C device.
7.2 Parameters Setting Connect the supplied USB cable between the computer USB port and the mini USB connector of the MT-900C device.
The USB interface is also a command and data interface which allows users to download the firmware and set configurations. Users can use “Mini Tracker setting program” to change setting, send commands or upgrade firmware.
8. Button/Switch Indication
(1)Slide switch
A micro switch for turning on or turning off MT-900C.
(2)Panic Button
Press and hold the Panic button for 3 seconds to activate the device to perform the emergency notification and followed the pre-defined setting (Emergency alarm).
9. LED Indication
9.1 Power On/Off and Idle status
For the power status indicator through green LED, detailed information is shown in the following table
LED mode Operation status
OFF POWER OFF or IDLE mode ON POWER ON
9.2 GPS Status For the GPS status indicator through green LED, det ailed information is shown in the followin g table
LED mode Operation status OFF un-fixed FLASH fixed
UniTraQ International Corp. RoHS compliance. 2012,07, Version 1.3 7
Mini Tracker Model: MT-900C
9.3 Mobile Status For the WCDMA/GPRS/GSM status indicator through blue LED, detailed the information is shown in the following table.
LED mode Operation status OFF WCDMA/GPRS/GSM is not running FLASH Indicates WCDMA/GPRS/GSM data transfer:
9.4 Charging Status
For the charging status indicator through Red LED, detailed information is shown in the following table
LED mode Operation status ON Charging OFF Charging finish Flashing Emergency Alarm
9.5 Emergency Alarm
For the Emergency Alarm indication, the power, GPS, and GPRS LEDs will light on for 3 seconds.
LED mode Operation status Power, GPS, GPRS light ON 3seconds
SOS emergency alarm
10. Device Installation
10.1 How to insert SIM card
(1) Lift SIM card cover and rotate it by the direction of the mark (See Picture 2), and the Status
Indicator and MIC receiver should be on the upper side.
(2) To face up the chip side of SIM card, and the notch should be on the upper-right side as
Picture 3.
(3) Insert the SIM card and push it to the end of slot and put on the cover.
10.2 How to take out SIM card
1. Lift and rotate SIM card cover .
2. Push SIM card and it will pop out from the slot.
UniTraQ International Corp. RoHS compliance. 2012,07, Version 1.3 8
Mini Tracker Model: MT-900C
*
NOTE: (1) Before installing the SIM card, make sure your SIM card is not locked by any PIN Code, if it is
was locked, please use a cell phone to unlock the card's PIN Code.
Picture 2 Picture 3
(2) Please note that the folded corner of the SIM card should be on the Upper Right side when you
install the card. (See Picture 3)
(3) You can use prepaid cards or normal subscription cards. If you use prepaid cards then make
sure it can’t be drained without automatic refill so you do not risk losing communication with the tracker.
(4) The SIM card is not included in the package. An appropriate SIM card is available from the
user's local operator.
UniTraQ International Corp. RoHS compliance. 2012,07, Version 1.3 9
Mini Tracker Model: MT-900C
11. Device Configuration
11.1 USB driver installation procedure
Connect MT-900C device to PC, choose “No, not this time” then click Next button
Choose “install from a list or specific location(Advanced)”, then click Next button
UniTraQ International Corp. RoHS compliance. 2012,07, Version 1.3 10
Mini Tracker Model: MT-900C
Click the Browser button to search the installation file, then click Next button to install USB driver
UniTraQ International Corp. RoHS compliance. 2012,07, Version 1.3 11
Mini Tracker Model: MT-900C
Click Finish button to complete
UniTraQ International Corp. RoHS compliance. 2012,07, Version 1.3 12
Mini Tracker Model: MT-900C
11.2 Min Tracker Setting description
(Please refer to the “user manual of mini Tracker setting program”)
(1) Set TCP IP & Port:
Run Mini Tracker Setting tool software, then it will show the setting environment. Choose Remote Server & Port Setting in commands column. Follow the below picture setting, then click the “Send command” button, then you will see OK in Result Window.
(2) Set Device ID:
Choose Device ID in Commands column. Follow the below picture setting, then click the “Send command” button, then you will see OK in Result Window
UniTraQ International Corp. RoHS compliance. 2012,07, Version 1.3 13
11.3 Upgrade Firmware
Mini Tracker Model: MT-900C
(1) Using Mini tracker Setting program
(a) Go to “Update FW” function, and click “ *** ” button to browse the firmware in your PC
file folder.
(b) There will pop out a dialogue box and shows the file in the folder, you can select the
firmware file.
(c) Click “Open” button to start update firmware procedure.
UniTraQ International Corp. RoHS compliance. 2012,07, Version 1.3 14
(2) Using PC Hyper Terminal tool
(a) Power on the device. Using USB cable connects the device with PC.
Check if the device access to the PC’s COM port. My Computer>Properties>Hardware>Device >Manager>Ports (COM&LPT)
(b) Open the Hyper Terminal, and select the corresponding COM.
The baud rate is 115200, 8 data bits, none parity check, 1 stop bit, none flow control.
Mini Tracker Model: MT-900C
(c) Input “updmtfm” and Enter in HyperTerminal.
(d) Select the file which to be downloaded via “Transfer” -> “Send File” of the
HyperTerminal as the figure.
(e) After all, press the “Send” button to download file from PC.And then you will see the
download progress.
UniTraQ International Corp. RoHS compliance. 2012,07, Version 1.3 15
Mini Tracker Model: MT-900C
11.4 Power saving mode/Idle mode
MT-900C supports 3 idle modes for user application. T he user can select the one suitable to its demand.
(1) Time Interval idle
The device will wake up to report at pre-defined time interval. The mobile module is in idle too. So the user can still call in to wake up the tracker to report.
(2) Phone/SMS idle
The device will keep under the idle mode until the user call in or send SMS to wake up the
tracker to report.
(3) Gsensor idle
The device will be in idle mode until the vibration detected and meets the conditions. Then
the device will wake up and report to server or mobile phone. The mobile module is in idle too. So the user can still call in to wake up the tracker to report.
Note1: The tracker will wake up to report by phone call when the user calls in and hangs on within 3 ring tone. The device will pick up the phone for remote monitoring if the ring ton e over 3 times. Note2: When the tracker is set to the idle mode, the tracker will check the alarm conditions and report only when it is during the wake up time. If there are alarms occur while system wakes up, the system will not go into idle again before all alarms clear.
11.5 Short Message Service Control
The tracker also provides another way for control access or configuration. From the Short Message Service, the user can use the defined number mobile phone to control the tracker. After received the SMS, the tracker will perform as the request command and will response to the mobile phone with SMS.
(1) Version Information:
(a) Hardware: 0.1 (or last version). (b) Firmware: MT900C Standard version 1.0.0 (mt900 c_std_v1.0.0).
(2) General Rule
a) Password: pppppp, 6 alphanumeric characters. b) *: Start symbol.
#: End symbol.
UniTraQ International Corp. RoHS compliance. 2012,07, Version 1.3 16
Mini Tracker Model: MT-900C
c) ID: Tracker Identification number, 4 ~ 16 alphanumeric characters. No Space character is allowed, only “,” between the * and #. d) RX: receive from mobile phone.
TX: response to mobile phone.
e) GPS location information: the format will be:
i) GPS fixed: [ http://maps.google.com/maps?hl=en&q=24.816848,121.025245 ] ii) Cell ID: Cell-Info 1, Cell-Info 2, Cell-Info 3, Cell-Info 4
Cell-Info: <MCC>: Number Mobile country code, range 0-999 (3 digit s ).
<MNC> :Number Mobile network code, range 0-999 (2 or 3 digits). <LAC>: Number Location area code, range 0h-FFFFh (2 oct ets). <CI> :Number Cell Identity, range 0h-FFFFh (2 octets).
<RxLevServ>: Number Received signal level on the cell, range 0-63. For example: 466,97,7664,85d6,048,466,97,7664,ffff,039,07,466,97,7664,898d,036,466,97,766 4,898d,036
f) If the device could not get a valid date/time from GPS message, it will show
00/00/00,00:00:00
g) Alarm SMS: ID: alarm type,[GPS location information]
For example: MT-01Over Speed Warning, [http://maps.google.com/maps?hl=en&q=24.816848,121.025245 ]
h) SOS POS format: SOS,ID,Date,Time,[GPS location information]
(3) Command Description Set Tracker ID
Function Set up the ID into the tracker. Format RX *ID,PPPPPP,setid,new ID,new ID# Response TX New ID Setup OK or TX Old ID Setup FAIL
Set Cellular Number
Function Set up the phone number(s) into the tra cker. Format RX *ID,PPPPPP,fonsetup,phone-1(,phone-2, phone- 3)# Response TX ID fonsetup OK or TX ID fonsetup FAIL
UniTraQ International Corp. RoHS compliance. 2012,07, Version 1.3 17
Set Time Interval
Function Set up the location response time interval into the tracker.
Format RX *ID,PPPPPP,tintsetup,xxxxx,Unit# Response TX ID tintsetup OK or TX ID tintsetup FAIL
Enable and Set up Geofence
Function Set up the radius of the Geofence into the tracker, the unit is
Format RX *ID,PPPPPP,geofenceon,xxxxx# Response TX ID geofence ON,xxxxx,GPS location information or TX ID geofenceon FAIL
Mini Tracker Model: MT-900C
Unit: s - second, m - minute, h - hour, d - day.
meters.
Disable Geofence
Function Disable the Geofence function of the tracker. Format RX *ID,PPPPPP,geofenceoff# Response TX ID geofenceoff OK or TX ID geofenceoff FAIL
Set Tracker Password
Function Set up the password into the tracker. Format RX *ID,PPPPPP,setpass,new password,new
Response TX ID setpass OK or TX ID setpass FAIL
Inquire Current Location
password#
Function Inquire the location information from the tracker. Format RX *ID,PPPPPP,gpsinq# Response TX ID,GPS location information or TX ID gpsinq FAIL
UniTraQ International Corp. RoHS compliance. 2012,07, Version 1.3 18
Inquire IMEI code
Function Inquire the IMEI code from the tracker. Format RX *ID,PPPPPP,getimei# Response TX ID [15 decimal] of IMEI or TX ID getimei FAIL
Set IP and Port
Function Set up the IP and Port of the server into the tracker. Format RX *ID,PPPPPP,ippsetup,xxx.xxx.xxx.xxx,xxxxx# Response TX ID [{IP}:{Port}] OK (Try to change) or TX ID ippsetup FAIL
Inquire Battery Voltage
Mini Tracker Model: MT-900C
Function Inquire the battery voltage from the tracker. Format RX *ID,PPPPPP,batteryinq# Response TX ID battery x.xxx or TX ID battery FAIL
Set Notification Way
Function Select notification from the HSPA/GPRS or SMS.
HSPA/GPRS :ON/OFF or SMS :ON/OFF, 1 - ON, 0 - OFF. Format RX *ID,PPPPPP,notify,1/0,1/0 # Response TX ID notify ON/OFF ON/OFF or TX ID notify FAIL
Enable and Set up Over Speed Detection
Function Set up the speed threshold for alarm detection into the
tracker, the unit is kilometer. Format RX *ID,PPPPPP,overspeedon,xxx# Response TX ID overspeed on,xxx or TX ID overspeedon FAIL
UniTraQ International Corp. RoHS compliance. 2012,07, Version 1.3 19
Disable Over Speed Detection
Function Disable the over speed det ection function. Format RX *ID,PPPPPP,overspeedoff# Response TX ID overspeedoff OK or TX ID overspeedoff FAIL
Enable Audio Monitoring
Function Activate the audio monitoring function. Format RX *ID,PPPPPP,moniteron# Response TX ID moniteron OK or TX ID moniteron FAIL
Disable Audio Monitoring
Function Disable the audio monitoring functio n.
Mini Tracker Model: MT-900C
Format RX *ID,PPPPPP,moniteroff# Response TX ID moniteroff OK or TX ID moniteroff FAIL
Get Product ID (Serial Number)
Function Get product ID (serial number). Format RX *ID,PPPPPP,getpid# Response TX ID [17 Characters] of PID or TX ID getpid FAIL
Set Time Zone
Function Set up the time zone for SMS content.
Format RX *ID,PPPPPP,settimezone,Hour,Minute# Response TX ID settimezone OK or TX ID settimezone FAIL
Hour: -12:00~13:00 Minute: 0、15、30、45
UniTraQ International Corp. RoHS compliance. 2012,07, Version 1.3 20
Set sending SMS POS
Function Set up sending SMS POS.
Format RX *ID,PPPPPP,setsendpos,Switch-1,Switch-2,S
Response TX ID setsendpos OK or TX ID setsendpos FAIL
Set Power Control
Function Set up the system power control for the tracker to get into
Mini Tracker Model: MT-900C
Switch : 1- Yes, 0 - No. Switch-1:phone-1 SMS POS switch YES or NO.
witch-3#
the sleep mode.
Type: 0 - NONE, 1 - Time Interval IDLE,
2 - SMS/Phone IDLE, 3 - G-Sensor IDLE
Unit: s - second, m - minute, h - hour, d - day. Format RX *ID,PPPPPP,setpwrctrl,type,xxxxx,Unit# Response TX ID setpwrctrl OK or TX ID setpwrctrl FAIL
UniTraQ International Corp. RoHS compliance. 2012,07, Version 1.3 21
Mini Tracker Model: MT-900C
FCC Warning statement
a. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee tha t int erf erence will not occur in a part icular inst allation. If this equipme nt doe s c ause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or mor e of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. Consult the dealer or an experienced radio/TV technician for help.
b. You are cautioned that changes or modifications not expressly approv ed by the party responsible for compliance could void your authority to operat e the equipment.
c. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation
FCC RF Radiation Exposure Statement:
1. This Transmitter has been demonstrated co-location compliance requirements as documented in this filing.
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment for body-worn configuration in direct contact to the phantom.
UniTraQ International Corp. RoHS compliance. 2012,07, Version 1.3 22
Mini Tracker Model: MT-900C
UniTraQ International Corp
2F., No.136, Ziqiang S. Rd., Zhubei City, Hsinchu County 30264, Taiwan (R.O.C.)
TEL886-3-6578491 FAX886-3-6578492
Email support@unitraq.com Website www.unitraq.com
© 2012 UniTraQ International Corp. All rights reserved.
Not to be reproduced in whole or part for any purpose without written permission of UniTraQ International Corp (“UniTraQ”) Information provided by UniTraQ is believed to be accurate and reliable. These materials are provided by UniTraQ as a service to its customers and may be used for informational purposes only. UniTraQ assumes no responsibility for errors or omissions in these materials, nor for its use. UniTraQ reserves the right to change specification at any time without notice.
These materials are provides “as is” without warranty of any kind, either expressed or implied, relating to sale and/or use of UniTraQ products including liability or warranties rel ating to fitness for a particular purpose, consequential or incidental damages, merchantability, or infringement of any patent, copyright or other intellectual property right. UniTraQ further does not warrant the accuracy or completeness of the infor mation, text, graphics or other items contained within these materials. UniT raQ shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenu es or lost profits, which may result from the use of these materials.
UniTraQ products are not intended for use in medical, life-support devices, or applications involving potential risk of death, personal injury, or severe property damage in case of failure of the product.
UniTraQ International Corp. RoHS compliance. 2012,07, Version 1.3 23
Loading...