P-5-22 Bed/Floor Sensor Pad 24” x 30” Mounts on mattress or floor.
USER MANUAL QUICK START GUIDE
Components:
1. Sensor Pad
with 4 velcro tabs for mounting.
Step 1.
Uncoil the cord from the sensor pad. Place the sensor pad on the bed with the cord coming
straight out and down under the mattress, protruding towards the back of the bed towards the
alarm unit. The pad would normally be placed on the vinyl mattress just below waist level and
the alarm would sound when the patient rose from the bed (weight off). For a more immediate
response place the pad under the patients shoulder blades. Then with the patient first attempt
to rise (releasing pressure on sensor pad) the alarm will sound.
The RJ22 connection at the end of the cord may be connected into any of Emergency Caller
Products alarm units such as the Patient Alert (PA), the Extended Range Transmitter (TR-
300), or the Long Range Transmitter (LT-900). Consult your Emergency Caller Products sales
representative to learn how these other products work with this model sensor pad. The sensor
pad may also be connected into other products that will receive the RJ22 connector.
Sensor Pads detect both Applied Weight “Patient ON” pad or Removed Weight “Patient Off”.
Selection made by switch on Universal Transmitter Unit or other monitoring products. Can be
used to detect patient in bathtub or shower for entry or exit (weight off or weight on). Sensor
pads are slip resistant and completely waterproof. Complete with velcro tabs and 8 ft. leads
(except Chair-seat Pad with a 4 ft.lead). Lifetime sensor pads replace all disposable sensor
pads. Emergency Caller Sensor pads have been used for over 25 years in security applications. They are durable, safe and withstand both outdoor and indoor environments. With lifetime guarantee you never again need to be concerned about constant replacement and
expensive costs.
EMERGENCY CALLER PRODUCTS (T) 800-227-2474 (F) 800-762-7613
WWW.EMERGENCYCALLER.COM * SALES@EMERGENCYCALLER.COM