United Security Products P-4-22 User Manual

P-4-22 Bed/Floor Sensor Pad 18” x 24” Mounts on mattress or floor.

USER MANUAL QUICK START GUIDE

Components:

1. Sensor Pad

Step 1.

Uncoil the cord from the sensor pad. Place the sensor pad on the bed with the cord coming straight off and
down under the mattress.protruding towards the back of the bed towards the alarm unit. The pad would nor­mally be placed on the vinyl mattress just below waist level and the alarm would sound when the patient rose
from the bed. For a more immediate response place the pad under the patients shoulder blades. Then, when
the patient first attempts to rise the alarm will sound.

The RJ22 connection at the end of the cord may be connected into any of Emergency Caller Products alarm
units such as the Patient Alert (PA), the Extended Range Transmitter, TR-300, or the Long Range
Transmitter, the LT-900. Consult your Emergency Caller Products sales representative to learn how these
other products work with this model sensor pad.The pad may also be connected into other products that will
receive the RJ22 connector.

Sensor Pads detect both Applied Weight “Patient ON” pad or Removed Weight “Patient Off”. Selection made
by switch on Universal Transmitter Unit or other monitoring products. Can be used to detect patient in bath­tub or shower for entry or exit (weight off or weight on).Sensor pads are slip resistant and completely water­proof. Complete with velcro tabs and 8 ft. leads (except Chair-seat Pad with a 4 ft.lead). Lifetime sensor pads
replace all disposable sensor pads. Emergency Caller Sensor pads have been used for over 25 years in
security applications. They are durable,safe and withstand both outdoor and indoor environments. With life­time guarantee you never again need to be concerned about constant replacement and expensive costs.

EMERGENCY CALLER PRODUCTS (T) 800-227-2474 (F) 800-762-7613

WWW.EMERGENCYCALLER.COM * [e-mail]