United Security Products HUB-W2L Specsheet

900 MHz HUBs -
Wireless Hold Up Buttons
Now! The HUB series hold up buttons you have come to rely on and prefer are available in both 300 and 900 MHz wireless. We still use the same high standard of components and take the extra time to hand-assemble the units in the USA to
assure reliability, but now you won’t have to run all those troublesome wires.
Supervised Long
300MHz HUBs-
Standard Range
Range
The New HUB
TM
Brand Wireless Hold Up Buttons with built in transmitters can be mounted anywhere and immediately send
signal to the Wireless Receiver to activate Alarm Panel or Control with 1 to 16 zone Receivers Each zone can accommodate
up to 10 Wireless Hold Up Buttons. Local Receivers Activate Horn Alert with 1 to 40 Zones and 400 Wireless Hold Up Button
Capacity. Wireless Hubs are available in Momentary and Latching and run on long life Lithium Batteries.
No Wires! Operate Alarms,
Signal Devices, Controls,
Door Latches, Equipment,
Machinery, Hazardous Areas, Etc...
BATTERY OPERATED
& WIRELESS
Long Life, 10+ year
Lithium Battery
Low Transmitter Battery Indication
with most USP Receivers.
HUBTM Brand Wireless Hub’s include same proven technology of wired HUB’s to prevent false alarms and the same reliability you
and your customers have come to trust.
HUBTM Brand Wireless Receivers - Alarm Monitoring and Models. 1-16 zones, Up to 10 HUB’s per zone.
TM
Brand Local Monitor Receivers with Alert Notification -
HUB 1-40 zones, up to 10 HUB’s per zone.
WIRELESS HOLD UP BUTTONS
HUBTM SERIES WIRELESS HUBS  TRANSMITTERS
HUB-W1L ­HUB-W2M - 900MHz Momentary push-button transmitter HUB-W2L- 900MHz Latching push-button transmitter
WIRELESS HUB RECEIVERS
HUB
HUB-W1R
300Mz 1 Channel Receiver monitors up to 10 identically coded transmitters relay output.
HUBTM SERIES LOCAL ALERT RECEIVERS  900MHZ
WR-900-1
900MHz 1 Channel Receiver monitors up to 10 identically coded transmitters. Audio monitoring of alarm, low battery, and missing transmitter conditions, relay output.
HUB-W900R-40
900MHz Receiver, 40 Channel monitors up to 40 transmitters. monitors alarm, missing transmitter, and low battery conditions, LCD Information readout, relay output.
HUBTM SERIES AUTO VOICE DIALER RECEIVERS  900 MHZ
ERU-900NP
900MHz Single channel Supervised Receiver - Auto Voice Dialer monitors up to 10 identically coded transmitters. Monitors low battery, missing transmitter, aux output.
AD-900
900MHz Single Channel Receiver, 4 Channel Auto Voice Dialer
HUBTM SERIES ALARM PANEL  SYSTEM RECEIVERS  900MHZ
HUB-W2R
900MHz Single Channel Receiver; Supervised, low transmitter battery, missing transmitter, up to 10 identically coded transmitters LEDs indicate a low battery, alarm, or a missing (inoperative) transmitter, until reset.
WR-900-4
900MHz Receiver; 4 Channel, monitors up to 4 transmitters, 4 relay outputs. Provides alarm, low battery, and missing transmitter conditions.
WR-900-16
900MHz Receiver; 16 Channel, monitors up to 16 transmitters.4-relay outputs. Each output can be programmed to monitor alarm, low battery, and missing transmitter conditions, identies transmitter fault via a 7-segment display.
300MHz Latching push-button transmitter
TM
SERIES GENERAL PURPOSE RECEIVER  300MHZ
CUT THE WIRES!
For MORE INFORMATION
Visit us at www.unitedsecurity.com
Tel 1-800-227-1592 • Fax 1-858-455-0036
Email: sales@unitedsecurity.com • www.unitedsecurity.com
Loading...