UNITED LINK UniPan-3150P, UniPan-3156P, UniPan-3170P, UniPan-3185P, UniPan-3156 User Manual
...
UniPan-3XXX Series
15”, 15.6”, 17”, 18.5”, 21.5” Intel 4th Gen. Core i3,
Fanless Industrial Compact Size Panel PC
User Manual
Release Date Revision
Aug 2016 V1.1
UniPan-3XXX Series User Manual
1
Revision History
Reversion
Date
Description
1.0
2015/08/06
Preliminary Release
1.1
2016/08/23
Correct Typo
UniPan-3XXX Series User Manual
2
Table of Contents
Chapter 1 Getting Started ................................................ 4
1.1 Features ......................................................................................... 4
1.2 Specifications ................................................................................. 4
1.3 Dimensions .................................................................................... 6
1.4 Brief Description of UniPan-3XXX................................................... 9
1.5 Installation of HDD ....................................................................... 11
Chapter 2 Hardware ............................................... 13
2.1 Mainboard Introduction .............................................................. 13
2.2 Specifications ............................................................................... 13
2.3 Jumpers and Connectors Location ............................................... 17
2.4 Jumpers Setting and Connectors .................................................. 18
Chapter 3 BIOS Setup ............................................... 49
3.1 Operations after POST Screen ...................................................... 49
3.2 BIOS Setup Utility ......................................................................... 49
3.3 Main Settings ............................................................................... 50
3.4 Advanced Settings ....................................................................... 51
3.5 Chipset Settings ........................................................................... 55
3.6 Boot Settings................................................................................ 57
3.7 Security Settings .......................................................................... 58
3.8 Save & Exit Settings ..................................................................... 59
Chapter 4 Installation of Drivers .............................................. 61
4.1 Intel(R) CORE TM SoC Chipset ...................................................... 62
4.2 Intel(R) VGA Chipset .................................................................... 64
4.3 Intel(R) LAN Driver ....................................................................... 68
4.4 Realtek ALC662 HD Audio Driver.................................................. 71
4.5 USB 3.0 Driver .............................................................................. 73
4.6 Intel(R) AMT Driver ...................................................................... 76
Chapter 5 Touch Screen Installation .............................................. 79
5.1 Windows 7/8/8.1 Universal Driver Installation for PenMount 6000
Series 79
5.2 Software Functions ...................................................................... 89
Caution! ............................................................................................108
Safety Precautions ............................................................................109
Packing List .......................................................................................110
UniPan-3XXX Series User Manual
3
Figures
Chapter 1 Getting Started ........................ 4
Figure 1.1 : Dimensions of UniPan-3150 .................................................. 6
Figure 1.2 : Dimensions of UniPan-3156 .................................................. 6
Figure 1.3 : Dimensions of UniPan-3170 .................................................. 7
Figure 1.4 : Dimensions of UniPan-3185 .................................................. 7
Figure 1.5 : Dimensions of UniPan-3215 .................................................. 8
Figure 1.6 : Front View of UniPan-3XXX Series ......................................... 9
Figure 1.7 : Rear View of UniPan-3150 ................................................... 10
Figure 1.8 : Rear View of UniPan -3156/3185 ........................................ 10
Figure 1.9 : Rear View of UniPan-3170 ................................................... 10
Figure 1.10 : Rear View of UniPan-3215 ................................................. 11
Chapter 2 Hardware ....................... 13
Figure 2.1 : Mainboard Dimensions ....................................................... 16
Figure 2.2 : Jumpers and Connectors Location- Board Top .................... 17
Figure 2.3 : Jumpers and Connectors Location- Board Bottom .............. 17
UniPan-3XXX Series User Manual
4
Chapter 1 Getting Started
1.1 Features
15”/15.6”/17”/18.5”/21.5” Industrial Compact Size Panel PC
Flat front panel touch screen
Fanless design
Intel 4th Gen. Core i3 CPU built-in
Onboard 4GB DDR 3L 1600 MHz/8GB(option)
9~36VDC wide-ranging power input
IP65 compliant front panel
Optional projected capacitive touchscreen support 7H anti-scratch surface
1.2 Specifications
UniPan-3150(P)
UniPan-3156(P)
UniPan-3170(P)
UniPan-3185(P)
UniPan-3215(P)
System
CPU
Onboard Intel 4th Gen. Core i3 CPU Processors
Chipset
SoC
Memory
Onboard 4GB DDR 3L 1600 MHz/8GB(option)
IO Port
USB
2 x USB 3.0 type A
Serial/Parallel
1 x RS-232 DB-9(COM2)
1 x DB-9 RS-232/422/485 (Default RS-232)(COM1)
1 x HDMI Port (Reserved, no printing)
Audio
1 x Audio Line Out
LAN
2 x GbE LAN RJ-45
Power
1 x 3-pin DC Power input terminal
1 x 2-pin connector for power on/off button
Option
2 x RS-232 DB-9 + 1 x Mini-PCIe slot via DBM-A28C2ME1
2 x CAN bus via DBM-A28CAN2
2 x USB 2.0 type A + 1 x Mini-PCIe slot + 1xRS-232 DB-9 via DBM-A28C1U2P1
2 x USB 2.0 type A Via DBM-A28U2
Storage Space
UniPan-3XXX Series User Manual
5
Storage
1 x SD card slot, up to 32GB
1 x 2.5" SATA HDD bay for SATA HDD (Easy Accessible)
Expansion
Expansion Slot
1 x Internal Mini-PCIe slot full size
Display
Display Type
15” TFT LCD
15.6” TFT LCD
17” TFT LCD
18.5” TFT LCD
21.5” TFT LCD
Max. Resolution
1024 x 768
1366 x 768
1280 x 1024
1366 x 768
1920 x 1080
Max. Color
16.2M
16.7M
16.7M
16.7M
16.7M
Luminance
300
300
350
300
250
Contrast Ratio
800 : 1
500 : 1
1000 : 1
1000 : 1
3000 : 1
Viewing Angle
170(H)/170(V)
160(H)/160(V)
170(H)/160(V)
170(H)/160(V)
178(H)/178(V)
Backlight Lifetime
50,000 hrs
50,000 hrs
30,000 hrs
50,000 hrs
30,000 hrs
Touch Screen – Resistive Touch Window Type
TS Control IC
PenMount 6000 on Board
Interface
USB
Light Transmission
Over 80%
Touch Screen – Projected Capacitive Type
TS Control IC
Chip on tail
Interface
USB
Light Transmission
Over 90%
Power
Power Input
9~36V DC
Mechanical
Front Bezel
Flat Bezel Design
Front Bezel Metal
Aluminum / Panel Mounting
Rear Panel Metal
Aluminum / VESA Mount 100 x 100
Chassis Color
RAL 9007
IP Rating
Front Panel IP65
Dimension(mm)
410 x 310 x 54.6
412 x 277.5 x 72
439 x 348 x 64.8
499.6 x 314.6 x 59.9
557 x 362 x 64.8
Operating System Support
OS Support
Windows 7 64-bit, WES 7, Windows 8, WES 8, Windows 8.1
Environmental
Operating temperature
0~50℃
Storage temperature
-20~60℃
Storage humidity
10 to 90% @ 40°C, non- condensing
Certification
CE / FCC Class A
UniPan-3XXX Series User Manual
6
1.3 Dimensions
Figure 1.1 : Dimensions of UniPan-3150
Figure 1.2 : Dimensions of UniPan-3156
UniPan-3XXX Series User Manual
7
Figure 1.3 : Dimensions of UniPan-3170
Figure 1.4 : Dimensions of UniPan-3185
UniPan-3XXX Series User Manual
8
Figure 1.5 : Dimensions of UniPan-3215
UniPan-3XXX Series User Manual
9
1.4 Brief Description of UniPan-3XXX
There are 15”, 15.6”, 17”, 18.5” and 21.5” Industrial Compact Size Panel PC in
UniPan-3XXX series, which comes with flat front panel touch screen and fanless
design. It is powered by Intel 4th Gen. Core i3 CPU Processors, 4GB DDR3L 1600 MHz
(8GB is for option). UniPan series is 9~36V DC wide-ranging power input and IP65
compliant front panel. Optional projected capacitive touch support 7H anti-scratch
surface is ideal for use as PC-based controller for Industrial Automation & Factory
Automation.
Figure 1.6 : Front View of UniPan-3XXX Series
UniPan-3XXX Series User Manual
10
Figure 1.7 : Rear View of UniPan-3150
Figure 1.8 : Rear View of UniPan -3156/3185
Figure 1.9 : Rear View of UniPan-3170
UniPan-3XXX Series User Manual
11
Figure 1.10 : Rear View of UniPan-3215
1.5 Installation of HDD
Step 1
There are 2 screws to deal with when
enclosing or removing the chassis.
Gently remove 2 screws.
UniPan-3XXX Series User Manual
12
Step 2
You can put or remove HDD into the
machine by pulling the HDD bracket.
Step 3
You can remove HDD by unscrewing 4
screws in the HDD bracket.
Note: 4 screws are packed in the packing
package.
Step 4
There is a SD hole in the side of machine.
You can replace SD card from there.
UniPan-3XXX Series User Manual
13
Chapter 2 Hardware
2.1 Mainboard Introduction
SBC-710 is a 4" industrial motherboard developed on the basis of Intel Haswell-U
Processors, which provides abundant peripheral interfaces to meet the needs of
different customers. Also, it features dual GbE ports, 5-COM ports and one Mini PCIE
configuration, one eDP port, one HDMI port, one LVDS interface. To satisfy the
special needs of high-end customers, CN1 and CN2 and CN3 richer extension
functions. The product is widely used in various sectors of industrial control.
2.2 Specifications
Specifications
Board Size
170mm x 113mm
CPU Support
Intel® Core™ i3-4010U /1.7GHz (onboard)
Intel® Core™ /i5-4310U /2.0 up to 3.00GHz (option）
Intel® Core™ /i7-4510U /2.0 up to 3.10GHz (option）
Chipset
SoC
Memory Support
Onboard 4GB DDR3L SDRAM
Graphics
Intel® HD Graphics 4400
Display Mode
1 x HDMI Port
1 x LVDS (18/24-bit dual LVDS)
1 x eDP Port (EDP1, option)
Support
Resolution
Up to 1920 x 1200 for HDMI
Up to 1920 x 1200 for LVDS (PS8625)
Up to 1920 x 1200 for eDP
Dual Display
HDMI + LVDS
Super I/O
ITE IT8518E
Fintek F81216AD
BIOS
AMI/UEFI
Storage
1 x SATAIII Connector (7P)
UniPan-3XXX Series User Manual
14
1 x SATAIII Connector (7P+15P)
1 x SD Slot
Ethernet
2 x PCIe Gbe LAN by Intel 82574L
USB
2 x USB 3.0 (type A)stack ports (USB3)
(USB 3.0: USB3-1/USB3-2, USB 2.0: USB1/USB2)
2 x USB 2.0 Pin header for CN3 (USB3/USB4)
1 x USB 2.0 Pin header for CN2 (USB5)
1 x USB 2.0 Pin header for CN1 (USB7 or Touch, option)
1 x USB 2.0 for MPCIE1 (USB8)
Serial
1 x RS232/RS422/RS485 port, DB9 connector for external (COM1)
Pin 9 w/5V/12V/Ring select
1 x RS232 port, DB9 connector for external (COM2)
Pin 9 w/5V/12V/Ring select
2 x UART for CN3 (COM3,COM4)
1 x RS422/485 header for CN2 (IT8518E/COM5)
1 x RS422/485 header for CN2 (IT8518E/COM6,option)
Digital I/O
8-bit digital I/O by Pin header (CN2)
4-bit digital Input
4-bit digital Output
4-bit digital I/O by Pin header (CN3)
2-bit digital Input
2-bit digital Output
Battery
Support CR2477 Li battery by 2-pin header (BAT1/CMOS)
Smart Battery
1 x Smart battery
Support 3 Serial Li battery by 10-pin header (BAT2)
Audio
Support Audio via Realtek ALC662-VD HD audio codec
Support Line-in, Line-out, MIC by 2x6-pin header
Keyboard /Mouse
1 x PS2 keyboard/mouse by box pin header (CN3)
Expansion Bus
1 x mini-PCI-express slot
1 x PCI-express (CN3)
Touch Ctrl
1 x Touch ctrl header for TCH1 (ITE8518E/COM6)
(JP4 setting：RS232 or USB 2.0)
Power
Management
Wide Range DC9V~36V input
1 x 3-pin power input connector
UniPan-3XXX Series User Manual
15
Switches and
LED Indicators
1 x Power on/off switch (BT1/BT2/CN2/CN3)
1 x Reset (CN2)
1 x HDD LED status (CN2)
1 x Power LED status (CN1)
1 x Buzzer
External I/O port
2 x COM Ports (COM1/COM2)
2 x USB 3.0 Ports (stack)
2 x RJ45 GbE LAN Ports
1 x HDMI Port
1 x Stack audio Jack (Line out)
Watchdog Timer
Software programmable 1–255 level by Super I/O (Reserve)
Temperature
Operating: -20℃ to 70℃
Storage: -40℃ to 85℃
Humidity
10% - 90%, non-condensing, operating
Power
Consumption
12V /1.33A (Intel I3-4010U processor with 4GB DDR3L DRAM)
12V /1.33A (Intel I5-4310U processor with 4GB DDR3L DRAM)
12V /1.33A (Intel I7-4510U processor with 4GB DDR3L DRAM)
EMI/EMS
Meet CE/FCC class A
DBM-A28CAN2
2 x CAN bus
1 x SIM Card Socket
1 x mini-PCI-express slot
UniPan-3XXX Series User Manual
16
(units :mm)
Figure 2.1 : Mainboard Dimensions
UniPan-3XXX Series User Manual
17
2.3 Jumpers and Connectors Location
Figure 2.2 : Jumpers and Connectors Location- Board Top
Figure 2.3 : Jumpers and Connectors Location- Board Bottom
UniPan-3XXX Series User Manual
18
2.4 Jumpers Setting and Connectors
1. CPU1:
(FCBGA1168), onboard Intel Haswell-U Processors.
Model
Processor
Number
PBF
Cores/Threads
TDP
Remarks
SBC-710-i34010-4G
I3-4010U
1.7GHz
2 / 4
15W
SBC-710-i34010P-4G
i3-4010U
1.7GHz
2 / 4
15W
Option
SBC-710-i54310-4G
i5-4310U
2.0 up to 3.0GHz
2 / 4
15W
Option
SBC-710-i54310P-4G
i5-4310U
2.0 up to 3.0GHz
2 / 4
15W
Option
SBC-710-i74510-4G
i7-4510U
2.0 up to 3.1GHz
2 / 4
15W
Option
SBC-710-i74510P-4G
I7-4510U
2.0 up to 3.1GHz
2 / 4
15W
option
2. H3/H4/H5/H6(option):
CPU1 Heat Sink Screw holes, four screw holes for intel Haswell-U Processors
Heat Sink assemble.
3. FAN1(option):
(2.54mm Pitch 1x3 Pin Header), Fan connector, cooling fans can be connected
directly for use. You may set the rotation condition of cooling fan in menu of
BIOS CMOS Setup.
Pin#
Signal Name
1
Ground
2
VCC
3
Rotation detection
Note:
Output power of cooling fan must be limited under 5W.
4. U2/U3/U4/U5/U7/U8/U9/U10:
(FBGA96)Onboard DDR3L Memory.
UniPan-3XXX Series User Manual
19
Model
Memory
SBC-710-i34010-4G
4GB
SBC-710-i34010P-4G
4GB (option)
SBC-710-i54310-4G
4GB (option)
SBC-710-i54310P-4G
4GB (option)
SBC-710-i74510-4G
4GB (option)
SBC-710-i74510P-4G
4GB (option)
5. S-422 (PIN6):
(Switch), ATX Power and Auto Power on jumper setting.
S-422(Switch)
Mode
Pin6 (Off)
ATX Power
Pin6 (On)
Auto Power on (Default)
6. PS_ON (option):
(2.0mm Pitch 1x2 Pin wafe Header), ATX Power and Auto Power on jumper
setting.
Pin#
Mode
Open
ATX Power
Close 1-2
Auto Power on (Default)
7. BAT1:
(1.25mm Pitch 1x2 Wafer Pin Header) 3.0V Li battery is embedded to provide
power for CMOS.
Pin#
Signal Name
Pin1
VBAT
Pin2
Ground
8. JP3:
(2.0mm Pitch 1x2 Pin Header) CMOS clear jumper, CMOS clear operation will
permanently reset old BIOS settings to factory defaults.
JP3
CMOS
Open
NORMAL (Default)
Close 1-2
Clear CMOS
UniPan-3XXX Series User Manual
20
Procedures of CMOS clear:
a) Turn off the system and unplug the power cord from the power outlet.
b) To clear the CMOS settings, use the jumper cap to close pins 1 and 2 for
about 3 seconds then reinstall the jumper clip back to pins open.
c) Power on the system again.
d) When entering the POST screen, press the <ESC> or <DEL> key to enter
CMOS Setup Utility to load optimal defaults.
e) After the above operations, save changes and exit BIOS Setup.
9. BAT2:
(2.0mm Pitch 1x10 Wafer Pin Header), Smart battery Interface.
Pin#
Signal Name
Pin1
VCC_BAT1
Pin2
VCC_BAT1
Pin3
VCC_BAT1
Pin4
SMB_DAT_SW
Pin5
SMB_SCL_SW
Pin6
BAT1_TEMP
Pin7
Ground
Pin8
Ground
Pin9
Ground
Pin10
SET_BAT1_ON
Function
Specifications
Nominal voltage (3S1P)
11.1~12.6V
Charge voltage
12.6V
Charge current
0.5C
10. BAT_LED:
(2.0mm Pitch 1x4 Wafer Pin Header), The Charge status indicator for BAT2.
Pin1-Pin3: Charge LED status.
Pin2-Pin3: Discharge LED status.
Pin4-Pin3: EC LED status.
Pin#
Signal Name
Pin1
BAT2_LED+
UniPan-3XXX Series User Manual
21
Pin2
BAT2_LED-
Pin3
Ground
Pin4
RST_EC
11. DC_IN1:
(5.08mm Pitch 1x3 Pin Connector), DC9V~36V System power input connector.
Pin#
Signal Name
Pin1
DC+9V~36V
Pin2
Ground
Pin3
FG
Model
DC_IN1
SBC-710-i34010U-4G
180°Connector
SBC-710-I54310U-4G
180°Connector
SBC-710-I74510U-4G
180°Connector
SBC-710-I34010UP-4G
45°Connector
SBC-710-I54310UP-4G
45°Connector
SBC-710-I74510UP-4G
45°Connector
12. BT1/BT2:
Power on/off button, They are used to connect power switch button. The two
pins are disconnected under normal condition. You may short them
temporarily to realize system startup & shutdown or awaken the system from
sleep state.
13. LED2/LED3/LED4/LED5:
LED2: LED STATUS. Green LED for Motherboard EC status.
LED3: LED STATUS. Green LED for Power status.
LED4: LED STATUS. Green LED for Motherboard Standby Power Good status.
LED5: LED STATUS. Green LED for CPU1 status
14. HDMI1:
(HDMI 19P Connector), High Definition Multimedia Interface connector.
UniPan-3XXX Series User Manual
22
15. JP6:
(2.0mm Pitch 2x2 Pin Header),LVDS jumper setting.
JP6
Function (CN1)
Pin1-Pin2 (Close)
Signal channel LVDS
Pin1-Pin2 (Open)
Dual channel LVDS (Default)
Pin3-Pin4 (Close)
8/24 bit (Default)
Pin3-Pin4 (Open)
6/18 bit
16. U22:
AT24C02-DIP8,The EEPROM IC（U22）is the set of LVDS resolution. If you need
other resolution settings, please upgrade U22 data.
Model
LVDS resolution
SBC-710-i34010U-XX
SBC-710-i54310U-XX
SBC-710-i74510U-XX
1280 x 1024 (Default)
800 x 480 (option)
800 x 600 (option)
1024 x 768 (option)
1920 x 1080 (option)
……
17. INVT1:
(2.0mm Pitch 1x6 wafer Pin Header), Backlight control connector for LVDS.
Pin#
Signal Name
1
+DC12V_S0
2
+DC12V_S0
3
Ground
4
Ground
5
BKLT_EN_OUT
6
BKLT_CTRL
UniPan-3XXX Series User Manual
23
18. CN1:
(1.25mm Pitch 2x20 Connector, DF13-40P), For 18/24-bit LVDS output
connector, Fully supported by Parad PS8625(DP to LVDS), the interface
features dual channel 24-bit output. Low Voltage Differential Signaling, A high
speed, low power data transmission standard used for display connections to
LCD panels.
Function
Signal Name
Pin#
Pin#
Signal Name
Function
LVDS
12V_S0
2 1 12V_S0
LVDS
BKLT_EN_OUT
4 3 BKLT_CTRL
Ground
6 5 Ground
LVDS_VDD5
8 7 LVDS_VDD5
LVDS_VDD3
10 9 LVDS_VDD3
Ground
12
11
Ground
LA_D0_P
14
13
LA_D0_N
LA_D1_P
16
15
LA_D1_N
LA_D2_P
18
17
LA_D2_N
LA_D3_P
20
19
LA_D3_N
LA_CLKP
22
21
LA_CLKN
LB_D0_P
24
23
LB_D0_N
LB_D1_P
26
25
LB_D1_N
LB_D2_P
28
27
LB_D2_N
LB_D3_P
30
29
LB_D3_N
LB_CLKP
32
31
LB_CLKN
Ground
34
33
Ground
USB7
(JP4 open)
USB7
(JP4 open)
USB7_P
36
35
USB7_N
5V_S5_USB
38
37
5V_S5_USB
Power LED
PWR_LED+
40
39
Ground
Power LED
19. EDP1 (option)
Function
Signal Name
Pin#
Pin#
Signal Name
Function
12V_S0_EDP
2 1 12V_S0_EDP
12V_S0_EDP
4 3 12V_S0_EDP
Ground
6 5 Ground
EDP_VDD5
8 7 EDP_VDD5
EDP_VDD3
10 9 EDP_VDD3
UniPan-3XXX Series User Manual
24
EDP
Ground
12
11
Ground
EDP
EDP_BKLT_EN
14
13
EDP_TXN_1
EDP_BKLT_CTRL
16
15
EDP_TXP_1
EDP_VDD_EN
18
17
Ground
EDP_TXN_2
20
19
EDP_TXN_0
EDP_TXP_2
22
21
EDP_TXP_0
Ground
24
23
Ground
EDP_TXN_3
26
25
EDP_AUX_N
EDP_TXP_3
28
27
EDP_AUX_P
EDP_DISP_UTIL
30
29
12C1_SCL
12C
EDP_HP_CN
32
31
12C1_SDA
Ground
34
33
Ground
USB7
(option)
USB7
(option)
USB7_P
36
35
USB7_N
5V_S5_USB
38
37
5V_S5_USB
Power LED
PWR_LED+
40
39
Ground
Power LED
20. JP4:
(2.0mm Pitch 2x2 wafer Pin Header), USB3(CN1) or Touch jumper setting.
JP4
Function
USB7 (CN1)
Touch (TCH1)
Close 3-4 (default)
-
Yes
Open 3-4 (option)
Yes
-
Open 1-2 (default)
-
21. TCH1:
(2.0mm Pitch 1x6 wafer Pin Header), internal Touch controller connector.
Pin#
Signal Name
1
SENSE
2
X+ 3 X- 4 Y+ 5 Y-
6
GND_EARCH
UniPan-3XXX Series User Manual
25
22. LED1:
LED1: LED STATUS. Green LED for Touch Power status.
23. JP1:
(2.0mm Pitch 2x3 Pin Header), COM1 jumper setting, pin 1~6 are used to select
signal out of pin 9 of COM1 port.
JP1 Pin#
Function
Close 1-2
COM1 RI (Ring Indicator) (default)
Close 3-4
COM1 Pin9: DC+5V (option)
Close 5-6
COM1 Pin9: DC+12V (option)
24. S_232
(Switch), COM1 jumper setting, it provides selectable RS232 or RS422 or RS485
serial signal output.
Function
S_232 Pin#
RS232
(Default)
ON:
Pin1, Pin2, Pin3, Pin4
RS422
(option)
OFF:
Pin1, Pin2, Pin3, Pin4
RS485
(option)
OFF:
Pin1, Pin2, Pin3, Pin4
25. S_422:
(Switch), COM1 setting, it provides selectable RS232 or RS422 or RS485 serial
signal output.
Function
S_422 Pin#
RS232
(Default)
OFF:
Pin1, Pin2, Pin3, Pin4, Pin5
RS422
(option)
ON:
Pin1, Pin2, Pin3, Pin4, Pin5
RS485
(option)
ON:
Pin1, Pin2, Pin3, Pin4, Pin5
UniPan-3XXX Series User Manual
26
26. COM1
(Type DB9M), Rear serial port, standard DB9 Male serial port is provided to
make a direct connection to serial devices. COM1 port is controlled by pins No.
1~6 of JP1, select output Signal RI or 5V or 12V, For details, please refer to
description of JP1 and S_232 and S_422 setting.
RS232 (Default)
Pin#
Signal Name
1
DCD# (Data Carrier Detect)
2
RXD (Received Data)
3
TXD (Transmit Data)
4
DTR (Data Terminal Ready)
5
Ground
6
DSR (Data Set Ready)
7
RTS (Request To Send)
8
CTS (Clear To Send)
9
JP1 select Setting (RI/5V/12V)
BIOS Setup:
Advanced/F81216 Super IO Configuration/Serial Port 0
Configuration 【RS-232】
RS422 (option)
Pin#
Signal Name
1
422_RX+
2
422_RX-
3
422_TX-
4
422_TX+
5
Ground
6
NC
7
NC
8
NC 9 NC
BIOS Setup:
Advanced/F81216 Super IO Configuration/Serial Port 0
Configuration 【RS-422】
UniPan-3XXX Series User Manual
27
RS485 (option)
Pin#
Signal Name
1
NC 2 NC 3 485-
4
485+
5
Ground
6
NC 7 NC 8 NC 9 NC
BIOS Setup:
Advanced/F81216 Super IO Configuration/Serial Port 0
Configuration 【RS-485】
27. JP2:
(2.0mm Pitch 2x3 Pin Header), COM2 jumper setting, pin 1~6 are used to select
signal out of pin 9 of COM2 port.
JP2 Pin#
Function
Close 1-2
COM2 RI (Ring Indicator) (default)
Close 3-4
COM2 Pin9: DC+5V (option)
Close 5-6
COM2 Pin9: DC+12V (option)
28. COM2:
(Type DB9M), Rear serial port, standard DB9 Male serial port is provided to
make a direct connection to serial devices.
Pin#
Signal Name
1
DCD# (Data Carrier Detect)
2
RXD (Received Data)
3
TXD (Transmit Data)
4
DTR (Data Terminal Ready)
5
Ground
6
DSR (Data Set Ready)
UniPan-3XXX Series User Manual
28
7
RTS (Request To Send)
8
CTS (Clear To Send)
9
JP2 select Setting (RI/5V/12V)
29. SATA_P:
(2.5mm Pitch 1x2 box Pin Header), One onboard 5V output connector are
reserved to provide power for SATA devices.
Pin#
Signal Name
1
+DC5V
2
Ground
Note:
Output current of the connector must not be above 1A.
30. SATA2:
(SATA 7Pin), SATA Connectors, one SATA connector are provided, with transfer
speed up to 6.0Gb/s.
31. SATA1:
(SATA 7Pin+15Pin), SATA Connectors, one SATA connector are provided, with
transfer speed up to 6.0Gb/s.
32. SD1:
(SD card slot), Secure Digital Memory Card socket.
33. MPCIE1:
(Socket 52Pin), mini PCIe socket, it is located at the top, it supports mini PCIe
devices with USB2.0 and LPC and SMBUS and PCIe signal. MPCIe card size is 30
x 50.95mm.
34. H1/H2:
MPCIE1 SCREW HOLES, H1 and H2 for mini PCIE card (30mm x 50.95mm)
assemble.
35. AUDIO1:
(2.0mm Pitch 2x6 Pin Header), Front Audio, An onboard Realtek ALC662-VD
codec is used to provide high-quality audio I/O ports. Line Out can be
UniPan-3XXX Series User Manual
29
connected to headphone or amplifier. Line In is used for the connection of
external audio source via a Line in cable. MIC is the port for microphone input
audio.
Signal Name
Pin#
Pin#
Signal Name
+5V
1 2 GND_AUD
LINE-OUT-L
3 4 LINE-OUT-R
FRONT_JD
5 6 LINE1_JD
LINE-IN-L
7 8 LINE-IN-R
MIC-IN-L
9
10
MIC-IN-R
GND_AUD
11
12
MIC1_JD
36. LINE_OUT:
(Diameter 3.5mm Jack), HD Audio port, an onboard Realtek ALC662-VD codec
is used to provide high quality audio I/O ports. Line Out can be connected to a
headphone or amplifier.
37. USB3:
USB3-1/USB3-2: (Double stack USB type A), Rear USB connector, it provides up
to two USB3.0 ports, High-speed USB 2.0 allows data transfers up to 480 Mb/s,
USB3.0 allows data transfers up to 5.0Gb/s, support USB full-speed and
low-speed signaling.
Each USB Type A Receptacle (2 Ports) Current limited value is 1.5A.
If the external USB device current exceeds 1.5A, please separate connectors
into different Receptable.
38. LAN1/LAN2:
LAN1/LAN2: (RJ45 Connector), Rear LAN port, Two standard 10/100/1000M
RJ-45 Ethernet ports are provided. Used intel 82574L chipset, LINK LED (green)
and ACTIVE LED (yellow) respectively located at the left-hand and right-hand
side of the Ethernet port indicate the activity and transmission state of LAN.
UniPan-3XXX Series User Manual
30
39. BUZ1:
Onboard buzzer.
40. CN2:
(DF13-30P Connector), for expand output connector, It provides eight GPIO,
one RS422 or RS485, one USB2.0, one Power on/off, one Reset.
Function
Signal Name
Pin#
Pin#
Signal Name
Function
5V
5V_S5
2 1 5V_S5
5V
PCH_GPIO49
GPIO_IN2
4 3 GPIO_IN1
PCH_GPIO48
PCH_GPIO51
GPIO_IN4
6 5 GPIO_IN3
PCH_GPIO50
PCH_GPIO53
GPIO_OUT2
8 7 GPIO_OUT1
PCH_GPIO52
PCH_GPIO55
GPIO_OUT4
10 9 GPIO_OUT3
PCH_GPIO54
Ground
12
11
Ground
485 or 422
(COM5)
485+_422TX5+
14
13
485-_422TX5-
485 or 422
(COM5)
422_RX5+
16
15
422_RX5-
485 or 422
(COM6)
485+_422TX6+
18
17
485-_422TX6-
485 or 422
(COM6)
422_RX6+
20
19
422_RX6-
5V
5V_S0
22
21
HDD_LED+
HDD LED
USB2.0
5V_USB5
24
23
5V_USB5
USB2.0
USB5_P
26
25
USB5_N
Ground
28
27
FP_RST-
RESET
Power auto on
PWRBTN_ON
30
29
Ground
COM5 BIOS Setup:
Advanced/Super IO Configuration/Serial Port0 Configuration 【RS-422】
Advanced/Super IO Configuration/Serial Port 0 Configuration【RS-485】
COM6 BIOS Setup：
Advanced/Super IO Configuration/Serial Port 1 Configuration【RS-422】
Advanced/Super IO Configuration/Serial Port 1 Configuration【RS-485】
41. EC_GPIO:
(2.0mm Pitch 1x10 Pin Header), for expand connector, It provides eight GPIO.
UniPan-3XXX Series User Manual
31
Pin#
Signal Name
1
Ground
2
EC_GPIO1
3
EC_GPIO2
4
EC_GPIO3
5
EC_GPIO4
6
EC_GPIO5
7
EC_GPIO6
8
EC_GPIO7
9
EC_GPIO8
10
3.3V_ALLS_EC
42. CN3:
(1.27mm Pitch 2X30 Female Header), For expand output connector,It provides
four GPIO, two USB 2.0,one PS/2 mouse, one PS/2 keyboard, two uart, one
PCIex1, one SMbus. It’s connected to the DBM-A28 riser Card
Function
Signal Name
Pin#
Pin#
Signal Name
Function
5V_S5_USB
1 2 5V_S5_USB
5V_S5_USB
3 4 5V_S5_SB
USB34_OC
5 6 PSON_ATX-
USB3
USB3_N
7 8 USB3_P
USB3
USB4
USB4_N
9
10
USB4_P
USB4
Ground
11
12
Ground
PS/2 MS
PS2_MSCLK
13
14
PS2_MSDATA
PS/2 MS
PS/2 KB
PS2_KBCLK
15
16
PS2_KBDATA
PS/2 KB
COM4
(UART)
COM4_RI
17
18
COM4_DCD-
COM4
(UART)
COM4_TXD
19
20
COM4_RXD
COM4_DTR
21
22
COM4_RTS-
COM4_DSR
23
24
COM4_CTS-
Ground
25
26
Ground
COM3
(UART)
COM3_RI
27
28
COM3_DCD-
COM3
(UART)
COM3_TXD
29
30
COM3_RXD
COM3_DTR
31
32
COM3_RTS-
COM3_DSR
33
34
COM3_CTS-
GPIO56
PCH_GPIO56
35
36
PCH_GPIO58
GPIO58
GPIO57
PCH_GPIO57
37
38
PCH_GPIO59
GPIO59
UniPan-3XXX Series User Manual
32
Ground
39
40
Ground
PCIE
PCIE1_TX_N0
41
42
PE1_TX_P0
PCIE
PCIE1_RX_N0
43
44
PE1_RX_P0
Ground
45
46
Ground
CLK_100M_PE1_N
47
48
CLK_100M_PE1_P
PCIE1_WAKE_N
49
50
PLT_RST_BUF2-
SMBUS
SMB_CLK_S5
51
52
SMB_DATA_S5
SMBUS
PCIE
CLKREQ_PE1-
53
54
Ground
3P3V_S5
55
56
PWRBTN_ON-
Power Auto on
3P3V_S5
57
58
3P3V_S5
12V
12V_S0
59
60
12V_S0
12V
43. DBM-A28C2ME1 (option):
SBC-710 Riser Card, DBM-A28C2ME1 CN3 connect to SBC-710 CN3 pin Header.
DBM-A28C2ME1 Top:
CN3:
(1.27mm Pitch 2x30 Pin Header), connect to SBC-710 CN3 pin Header.
M-PCIE1:
(Socket 52Pin), mini PCIe socket, it is located at the top, it supports mini PCIe
devices with USB2.0 (USB3), Smbus, SIM and PCIe signal. MPCIE card size is 30
x 30mm or 30 x 50.95mm.
Signal Name
Function support
UniPan-3XXX Series User Manual
33
PCIe 1X
Yes
USB2.0 (USB2)
Yes
SMBus
Yes
SIM
Yes
H1/H2:
MPCIE1 SCREW HOLES, H2 for mini PCIE card (30mm x 30mm) assemble. H1 for
mini PCIE card (30mm x 50.95mm) assemble.
LED1:
Mini PCIe devices LED Status.
SIM1:
(SIM Socket 6 Pin), Support SIM Card devices.
PS2:
(2.0mm Pitch 1x6 Pin Wafer), PS/2 keyboard and mouse port, the port can be
connected to PS/2 keyboard or mouse via a dedicated cable for direct used.
Pin#
Signal Name
1
KBDATA
2
MSDATA
3
Ground
4
+5V
5
KBCLK
6
MSCLK
GPIO1:
(2.0mm Pitch 2x5 Pin Header), General-purpose input/output port, it provides
a group of self-programming interfaces to customers for flexible use.
Signal Name
Pin#
Pin#
Signal Name
Ground
1
2
NC
NC
3 4 SMB_DATA_R
SMB_CLK_R
5 6 PCH-GPIO56
PCH-GPIO57
7 8 PCH-GPIO59
PCH-GPIO58
9
10
+5V
USB_23:
UniPan-3XXX Series User Manual
34
(2.0mm Pitch 2x5 Pin Header), Front USB connector, it provides one USB port
via a dedicated USB cable, speed up to 480Mb/s.
Signal Name
Pin#
Pin#
Signal Name
5V_USB23
1 2 5V_USB23
USB4_N
3 4 USB3_N (option, NC)
USB4_P
5 6 USB3_P (option, NC)
Ground
7 8 Ground
NC
9
10
Ground
Note:
Before connection, make sure that pinout of the USB Cable is in accordance
with that of the said tables. Any inconformity may cause system down and
even hardware damages.
JP5:
(2.0mm Pitch 2x3 Pin Header), COM5 setting jumper, pin 1~6 are used to select
signal out of pin 9 of COM5 port.
JP5 Pin#
Function
Close 1-2
RI (Ring Indicator) (default)
Close 3-4
COM5 Pin9=+5V (option)
Close 5-6
COM5 Pin9=+12V (option)
COM5(SBC-710/COM3):
(Type DB9), serial port, standard DB9 serial port is provided to make a direct
connection to serial devices. COM5 port is controlled by pins No. 1~6 of JP5,
select output Signal RI or 5V or 12V, for details, please refer to description of
JP3.
Pin#
Signal Name
1
DCD# (Data Carrier Detect)
2
RXD (Received Data)
3
TXD (Transmit Data)
4
DTR (Data Terminal Ready)
UniPan-3XXX Series User Manual
35
5
Ground
6
DSR (Data Set Ready)
7
RTS (Request To Send)
8
CTS (Clear To Send)
9
JP5 Setting:
Pin1-2: RI (Ring Indicator) (default)
Pin3-4: 5V Standby power (option)
Pin5-6: 12V Standby power (option)
JP6:
(2.0mm Pitch 2x3 Pin Header), COM6 setting jumper, pin 1~6 are used to select
signal out of pin 9 of COM6 port.
JP6 Pin#
Function
Close 1-2
RI (Ring Indicator) (default)
Close 3-4
COM6 Pin9=+5V (option)
Close 5-6
COM6 Pin9=+12V (option)
COM6(SBC-710/COM4):
(Type DB9), serial port, standard DB9 serial port is provided to make a direct
connection to serial devices. COM6 port is controlled by pins No.1~6 of JP6,
select output Signal RI or 5V or 12V, For details, please refer to description of
JP6.
Pin#
Signal Name
1
DCD# (Data Carrier Detect)
2
RXD (Received Data)
3
TXD (Transmit Data)
4
DTR (Data Terminal Ready)
5
Ground
6
DSR (Data Set Ready)
7
RTS (Request To Send)
8
CTS (Clear To Send)
9
JP6 Setting:
Pin1-2: RI (Ring Indicator) (default)
UniPan-3XXX Series User Manual
36
Pin3-4: 5V Standby power (option)
Pin5-6: 12V Standby power (option)
COM_6 (option, SBC-710/COM4):
(2.0mm Pitch 2x5 Pin Header), COM6 Port, up to one standard RS232 port are
provided. They can be used directly via COM cable connection.
Signal Name
Pin#
Pin#
Signal Name
DCD
1
2
RXD
TXD
3
4
DTR
Ground
5
6
DSR
RTS
7
8
CTS
JP6 Setting:
RI/5V/12V
9
10
NC
44. DBM-A28C2 (option):
SBC-710 Riser Card, DBM-A28C2 CN3 connect to SBC-710 CN3 pin Header.
DBM-A28C2 Top:
CN3:
(1.27mm Pitch 2 x 30 Pin Header), connect to SBC-710 CN3 pin Header.
LED1:
Mini PCIe devices LED Status.
PS2:
(2.0mm Pitch 1x6 Pin Wafer), PS/2 keyboard and mouse port, the port can be
UniPan-3XXX Series User Manual
37
connected to PS/2 keyboard or mouse via a dedicated cable for direct used.
Pin#
Signal Name
1
KBDATA
2
MSDATA
3
Ground
4
+5V
5
KBCLK
6
MSCLK
GPIO1:
(2.0mm Pitch 2x5 Pin Header), General-purpose input/output port, it provides
a group of self-programming interfaces to customers for flexible use.
Signal Name
Pin#
Pin#
Signal Name
Ground
1
2
NC
NC
3 4 SMB_DATA_R
SMB_CLK_R
5 6 PCH-GPIO56
PCH-GPIO57
7 8 PCH-GPIO59
PCH-GPIO58
9
10
+5V
USB_23:
(2.0mm Pitch 2x5 Pin Header), Front USB connector, it provides one USB port
via a dedicated USB cable, speed up to 480Mb/s.
Signal Name
Pin#
Pin#
Signal Name
5V_USB23
1 2 5V_USB23
USB4_N
3 4 USB3_N
USB4_P
5 6 USB3_P
Ground
7 8 Ground
NC
9
10
Ground
Note:
Before connection, make sure that pinout of the USB Cable is in accordance
with that of the said tables. Any inconformity may cause system down and
even hardware damages.
UniPan-3XXX Series User Manual
38
JP5:
(2.0mm Pitch 2x3 Pin Header), COM5 setting jumper, pin 1~6 are used to select
signal out of pin 9 of COM5 port.
JP6 Pin#
Function
Close 1-2
RI (Ring Indicator) (default)
Close 3-4
COM5 Pin9=+5V (option)
Close 5-6
COM5 Pin9=+12V (option)
COM5(SBC-710/COM3):
(Type DB9), serial port, standard DB9 serial port is provided to make a direct
connection to serial devices. COM5 port is controlled by pins No.1~6 of JP5,
select output Signal RI or 5V or 12v, For details, please refer to description of
JP3.
Pin#
Signal Name
1
DCD# (Data Carrier Detect)
2
RXD (Received Data)
3
TXD (Transmit Data)
4
DTR (Data Terminal Ready)
5
Ground
6
DSR (Data Set Ready)
7
RTS (Request To Send)
8
CTS (Clear To Send)
9
JP5 Setting:
Pin1-2: RI (Ring Indicator) (default)
Pin3-4: 5V Standby power (option)
Pin5-6: 12V Standby power (option)
COM6(SBC-710/COM3)：
(Type DB9), serial port, standard DB9 serial port is provided to make a direct
connection to serial devices. COM6 port is controlled by pins No.1~6 of JP6,
select output Signal RI or 5V or 12v, For details, please refer to description of
JP6.
UniPan-3XXX Series User Manual
39
Pin#
Signal Name
1
DCD# (Data Carrier Detect)
2
RXD (Received Data)
3
TXD (Transmit Data)
4
DTR (Data Terminal Ready)
5
Ground
6
DSR (Data Set Ready)
7
RTS (Request To Send)
8
CTS (Clear To Send)
9
JP6 Setting:
Pin1-2: RI (Ring Indicator) (default)
Pin3-4: 5V Standby power (option)
Pin5-6: 12V Standby power (option)
COM_6 (option, SBC-710/COM3):
(2.0mm Pitch 2X5 Pin Header), COM6 Port, up to one standard RS232 port are
provided. They can be used directly via COM cable connection.
Signal Name
Pin#
Pin#
Signal Name
DCD
1
2
RXD
TXD
3
4
DTR
Ground
5
6
DSR
RTS
7
8
CTS
JP6 Setting:
RI/5V/12V
9
10
NC
45. DBM-A28C1U2P1/DBM-A28C1U2 (option):
SBC-710 Riser Card, DBM-A28C1U2P1 CN3 connect to SBC-710 CN3 pin
Header.
DBM-A28C1U2P1 Top：
UniPan-3XXX Series User Manual
40
CN3:
(1.27mm Pitch 2X30 Pin Header),connect to SBC-710 CN3 pin Header.
M-PCIE1：
(Socket 52Pin), mini PCIe socket, it is located at the top, it supports mini PCIe
devices with Smbus, SIM and PCIe signal. MPCIe card size is 30x30mm or
30x50.95mm.
Signal Name
Function support
PCIe 1X
Yes
USB2.0 (USB3)
NC (option)
SMBus
Yes
SIM
Yes
H1/H2:
MPCIE1 SCREW HOLES, H2 for mini PCIE card (30mmx30mm) assemble. H1 for
mini PCIE card (30mmx50.95mm) assemble.
LED1：
Mini PCIe devices LED Status.
SIM1（option）：
(SIM Socket 6 Pin), Support SIM Card devices.
UniPan-3XXX Series User Manual
41
PS_ON1：
(2.0mm Pitch 1X2 Pin Wafer), ATX Power and Auto Power on jumper setting.
PS_ON
Mode
Close 1-2
Auto Power on (Default)
Open 1-2
ATX Power
PS_ON2（option）：
(2.0mm Pitch 1X2 Pin Wafer).
PS2：
(2.0mm Pitch 1X6 Pin Wafer), PS/2 keyboard and mouse port, the port can be
connected to PS/2 keyboard or mouse via a dedicated cable for direct used.
Pin#
Signal Name
1
KBDATA
2
MSDATA
3
Ground
4
+5V
5
KBCLK
6
MSCLK
GPIO1：
(2.0mm Pitch 2x5 Pin Header), General-purpose input/output port, it provides
a group of self-programming interfaces to customers for flexible use.
Signal Name
Pin#
Pin#
Signal Name
Ground
1
2
NC
NC
3 4 SMB_DATA_R
SMB_CLK_R
5 6 PCH-GPIO56
PCH-GPIO57
7 8 PCH-GPIO59
PCH-GPIO58
9
10
+5V
USB23(SBC-710 USB3/USB4)：
(Double stack USB type A), Rear USB connector, it provides up to 2 USB2.0
ports, speed up to 480Mb/s.
UniPan-3XXX Series User Manual
42
USB_23（option）：
(2.0mm Pitch 2x5 Pin Header), Front USB connector, it provides one USB port
via a dedicated USB cable, speed up to 480Mb/s.
Signal Name
Pin#
Pin#
Signal Name
5V_USB23
1 2 5V_USB23
USB4_N
3 4 USB3_N
USB4_P
5 6 USB3_P
Ground
7 8 Ground
NC
9
10
Ground
Note:
Before connection, make sure that pinout of the USB Cable is in accordance
with that of the said tables. Any inconformity may cause system down and
even hardware damages.
JP5：
(2.0mm Pitch 2x3 Pin Header), COM5 setting jumper, pin 1~6 are used to select
signal out of pin 9 of COM5 port.
JP3 Pin#
Function
Close 1-2
RI (Ring Indicator) (default)
Close 3-4
COM5 Pin9: +5V (option)
Close 5-6
COM5 Pin9: +12V (option)
COM5(SBC-710/COM3)：
(Type DB9), serial port, standard DB9 serial port is provided to make a direct
connection to serial devices. COM5 port is controlled by pins No.1~6 of JP5,
select output Signal RI or 5V or 12v, For details, please refer to description of
JP3.
UniPan-3XXX Series User Manual
43
Pin#
Signal Name
1
DCD# (Data Carrier Detect)
2
RXD (Received Data)
3
TXD (Transmit Data)
4
DTR (Data Terminal Ready)
5
Ground
6
DSR (Data Set Ready)
7
RTS (Request To Send)
8
CTS (Clear To Send)
9
JP5 Setting:
Pin1-2: RI (Ring Indicator) (default)
Pin3-4: 5V Standby power (option)
Pin5-6: 12V Standby power (option)
JP6：
(2.0mm Pitch 2x3 Pin Header), COM6 setting jumper, pin 1~6 are used to select
signal out of pin 9 of COM6 port.
JP3 Pin#
Function
Close 1-2
RI (Ring Indicator) (default)
Close 3-4
COM6 Pin9: +5V (option)
Close 5-6
COM6 Pin9: +12V (option)
COM6(SBC-710/COM4)：
(Type DB9), serial port, standard DB9 serial port is provided to make a direct
connection to serial devices. COM6 port is controlled by pins No.1~6 of JP6,
select output Signal RI or 5V or 12v, For details, please refer to description of
JP6.
Pin#
Signal Name
1
DCD# (Data Carrier Detect)
2
RXD (Received Data)
UniPan-3XXX Series User Manual
44
3
TXD (Transmit Data)
4
DTR (Data Terminal Ready)
5
Ground
6
DSR (Data Set Ready)
7
RTS (Request To Send)
8
CTS (Clear To Send)
9
JP6 Setting:
Pin1-2: RI (Ring Indicator) (default)
Pin3-4: 5V Standby power (option)
Pin5-6: 12V Standby power (option)
S1：
PWR BT: POWER on/off Button, They are used to connect power switch
button. The two pins are disconnected under normal condition. You may short
them temporarily to realize system startup & shutdown or awaken the system
from sleep state.
PWR LED: POWER LED status.
S1
Model
Yes
DBM-A28C1U2P1
No
DBM-A28C1U2
46. DBM -528CAN2 R0.10 (option)
SBC-710 Riser Card, DBM-A28CAN2 CN3 connect to SBC-710 CN3 pin Header.
It provides two CAN-bus Interface. DBM-A28CAN2 Top：
UniPan-3XXX Series User Manual
45
CN3：
(1.27mm Pitch 2X30 Pin Header), connect to SBC-710 CN3 pin Header.
M-PCIE1：
(Socket 52Pin), mini PCIe socket, it is located at the top, it supports mini PCIe
devices with Smbus, USB2.0,SIM and PCIe signal. MPCIe card size is 30x30mm
or 30x50.95mm.
Signal Name
Function support
PCIe 1X
Yes
USB2.0 (USB2)
Yes
SMBus
Yes
SIM
Yes
H1/H2:
MPCIE1 SCREW HOLES, H2 for mini PCIE card (30mmx30mm) assemble. H1 for
mini PCIE card (30mmx50.95mm) assemble.
LED1：
Mini PCIe devices LED Status.
SIM1 (option)：
(SIM Socket 6 Pin), Support SIM Card devices.
PS2：
(2.0mm Pitch 1X6 Pin Wafer), PS/2 keyboard and mouse port, the port can be
connected to PS/2 keyboard or mouse via a dedicated cable for direct used.
Pin#
Signal Name
1
KBDATA
2
MSDATA
3
Ground
4
+5V
5
KBCLK
6
MSCLK
UniPan-3XXX Series User Manual
46
USB_IN（option）：
(2.0mm Pitch 2x5 Pin Header), Front USB connector, it provides two USB port
via a dedicated USB cable, speed up to 480Mb/s.
Signal Name
Pin#
Pin#
Signal Name
5V_USB34
1 2 5V_USB34
NC (USB4_N)
3 4 NC (USB3_N)
NC (USB4_P)
5 6 NC (USB3_P)
Ground
7 8 Ground
NC
9
10
Ground
Note:
Before connection, make sure that pinout of the USB Cable is in accordance
with that of the said tables. Any inconformity may cause system down and
even hardware damages.
JP_SET（option）：
(2.0mm Pitch 2x5 Pin Header).
Signal Name
Pin#
Pin#
Signal Name
3P3V_S5_USB
1 2 3P3V_S5
3P3V_S5_USB
3 4 3P3V_S5
3P3V_S5_USB
5 6 3P3V_S5
PSON_ATX
7 8 Ground
PSON_ATX
9
10
Ground
JP6：
(2.0mm Pitch 2x3 Pin Header), COM6 setting jumper, pin 1~6 are used to select
signal out of pin 9 of COM6 port.
JP3 Pin#
Function
Close 1-2
RI (Ring Indicator) (default)
Close 3-4
COM6 Pin9: +5V (option)
Close 5-6
COM6 Pin9: +12V (option)
COM6(SBC-710/COM4)：
(2.0mm Pitch 2X5 Pin Header), COM6 Port, up to one standard RS232 port are
provided. They can be used directly via COM cable connection.
UniPan-3XXX Series User Manual
47
Signal Name
Pin#
Pin#
Signal Name
DCD
1
2
RXD
TXD
3
4
DTR
Ground
5
6
DSR
RTS
7
8
CTS
JP6 Setting:
RI/5V/12V
9
10
NC
COM5(SBC-710/COM3)：
(2.0mm Pitch 2X5 Pin Header), COM5 Port, up to one standard RS232 port are
provided. They can be used directly via COM cable connection.
Signal Name
Pin#
Pin#
Signal Name
DCD
1
2
RXD
TXD
3
4
DTR
Ground
5
6
DSR
RTS
7
8
CTS
RI
9
10
NC
GPIO1：
(2.0mm Pitch 2x5 Pin Header), General-purpose input/output port, it provides
a group of self-programming interfaces to customers for flexible use.
Signal Name
Pin#
Pin#
Signal Name
Ground
1
2
NC
NC
3 4 SMB_DATA_R
SMB_CLK_R
5 6 PCH-GPIO56
PCH-GPIO57
7 8 PCH-GPIO59
PCH-GPIO58
9
10
+5V
JTAG：
(2.0mm Pitch 2x5 Pin Header), Reserve.
JP1：
(2.0mm Pitch 1x2 Pin Header), Reserve.
JP2：
(2.0mm Pitch 1x2 Pin Header), Reserve.
CAN1/CAN2：
(3.5mm Pitch 1x10 Pin connector), it provides two CAN-bus Interface.
UniPan-3XXX Series User Manual
48
Pin#
Channel
Signal Name
Function
1
CAN2
CANL2
CAN bus Signal L
2
R2-
Terminal resistor R-(internally connected to CANL2)
3
FG
Shield cable (FG)
4
R2+
Terminal resistor R+(internally connected to CANH2)
5
CANH2
CAN bus Signal H
6
CAN1
CANL1
CAN bus Signal L
7
R1-
Terminal resistor R-(internally connected to CANL1)
8
FG
Shield cable (FG)
9
R1+
Terminal resistor R+(internally connected to CANH1)
10
CANH1
CAN bus Signal H
【See DBM-A28AN2 Manual】
47. DBM-A28U2 (option)
SBC-710 Riser Card, DBM-A28U2 CN3 connect to SBC-710 CN3 pin Header.
DBM-A28U2 Top：
CN3：
(1.27mm Pitch 2X30 Pin Header), connect to SBC-710 CN3 pin Header.
USB23(SBC-710 USB3/USB4)：
(Double stack USB type A), Rear USB connector, it provides up to 2 USB2.0
ports, speed up to 480Mb/s.
UniPan-3XXX Series User Manual
49
Chapter 3 BIOS Setup
3.1 Operations after POST Screen
After CMOS discharge or BIOS flashing operation, press [Delete] key to enter CMOS
Setup.
After optimizing and exiting CMOS Setup, the POST screen displayed for the first time
is as follows and includes basic information on BIOS, CPU, memory, and storage
devices.
3.2 BIOS Setup Utility
Press [Delete] key to enter BIOS Setup utility during POST, and then a main menu
containing system summary information will appear.
UniPan-3XXX Series User Manual
50
3.3 Main Settings
System Time:
Set the system time, the time format is:
Hour : 0 to 23
Minute : 0 to 59
Second : 0 to 59
System Date:
Set the system date, the date format is:
Day: Note that the ‘Day’ automatically changes when you set the date.
Month: 01 to 12
Date: 01 to 31
Year: 1998 to 2099
UniPan-3XXX Series User Manual
51
3.4 Advanced Settings
3.4.1 ACPI Settings
Enable ACPI Auto Conf:
[Disabled]
[Enabled]
Enable Hibernation:
[Enabled]
[Disabled]
ACPI Sleep State:
[S1 only (CPU Stop Clock) ]
[S3 (Suspend to RAM)]
[Suspend Disabled]
[Both S1 and S3 available for OS to choose from]
Lock Legacy Resources:
[Disabled]
[Enabled]
UniPan-3XXX Series User Manual
52
S3 Video Repost:
[Disabled]
[Enabled]
ACPI Low Power SO Idle:
[Disabled]
[Enabled]
3.4.2 CPU Configuration
Intel(R) Core(TM) i5-4310U @ 2.00GHz
CPU Signature
40651
Processor Family
6
Microcode Patch
17
FSB Speed
100 MHz
Max CPU Speed
2000 MHz
Mix CPU Speed
800 MHz
CPU Speed
2400 MHz
Processor Cores
2
Intel HT Technology
Supported
Intel HT-X Technology
Supported
Intel SMX Technology
Supported
64-bit
Supported
EIST Technology
Supported
CPU C3 State
Supported
CPU C6 State
Supported
CPU C7 State
Supported
L1 Date Cache
32KB x 2
L1 Code Cache
32KB x 2
L2 Cache
256KB x 2
L3 Cache
3072KB
Hyper-threading
[Enabled]
Active Processor Cores
[Enabled]
Overclocking lock
[All]
Limit CPUID Maximum
[Disabled]
Execute Disabled Bit
[Enabled]
Intel Virtualization Technology [Enabled]
Hardware Prefetcher
[Enabled]
Asjacent Cache Line Prefetch [Enabled]
CPU AES
[Enabled]
Boot Performance mode [Turbo Performance]
UniPan-3XXX Series User Manual
53
EIST
[Enabled]
Turbo Mode
[Enabled]
……
3.4.3 SATA Configuration
SATA Configuration(S)
[Enabled]
[Disabled]
SATA Mode Selection
[AHCI]
[RAID]
SATA Test Mode
[Disabled]
[Enabled]
Aggressive LPM Support
[Enabled]
[Disabled]
SATA Controller Speed
[Default]
[Gen1]
[Gen2]
[Gen3]
Software Feature Mask Configuration
Serial ATA Port 0 Empty
Software Preserve Unknown
Serial ATA Port 1 Empty
Software Preserve Unknown
…….
3.4.4 USB Configuration
USB Configuration
USB Module Version 8.10.31
USB Devices:
1 Keyboard, 1 Mouse, 1 Hubs
Legacy USB Support:
UniPan-3XXX Series User Manual
54
[Enabled]
[Disabled]
XHCI Hand-off:
[Enabled]
[Disabled]
EHCI Hand-off:
[Disabled]
[Enabled]
USB Mass Storage Driver Support
[Enabled]
[Disabled]
USB hardware delays and time-outs:
USB transfer time-out:
[20 sec]
[10 sec]
[5 sec]
[1 sec]
Device reset time-out:
[20 sec]
[10 sec]
[30 sec]
[40 sec]
Device power-up delay
[Auto]
[Manual]
3.4.5 Super IO Configuration
Super IO chip IT8518/IT8519
Serial Port 0 Configuration (COM5)
Device Mode Selection:
[RS-485]
[RS-422]
Serial Port 1 Configuration (COM6)
Device Mode Selection:
[RS-485]
[RS-422]
UniPan-3XXX Series User Manual
55
3.4.6 F81216 Second Super IO Configuration
Super IO chip F81216 Second IO
Serial Port 0 Configuration
UART1 Mode Selection:
[RS-232]
[RS-485]
[RS-422]
Serial Port 1 Configuration
Change Settings [Auto]
Serial Port 2 Configuration
Change Settings [Auto]
Serial Port 3 Configuration
Change Settings [Auto]
3.4.7 Intel (R) 82574L Gigabit Network Configuration-70:B3:D5:E7
3.4.8 Intel (R) 82574L Gigabit Network Configuration-70:B3:D5:E7
3.5 Chipset Settings
UniPan-3XXX Series User Manual
56
3.5.1 PCH-IO Configuration
Intel PCH RC Version 1.8.0.0
Intel PCH SKU Name Premium SKU
Intel PCH Rev ID 04/B2
PCH Express Configuration
PCI Express Clock Gating [Enabled]
DMI Link ASPM Control [Enabled]
DMI Link Extended Synch Control [Disabled]
PCIe-USB Glitch W/A [Disabled]
PCIE Root Port Function Swapping [Disabled]
Subtractive Decode [Disabled]
PCI Express Root Port 1
PCI Express Root Port 2
PCI Express Root Port 3
PCI Express Root Port 4
PCI Express Root Port 5
PCI Express Root Port 6
USB Configuration
USB Precondition [Disabled]
XHCI Mode
XHCI Idle L1
BTCG
USB Ports Per-Port Disabled Control [Disabled]
Restore AC Power Loss [Power off]
UniPan-3XXX Series User Manual
57
3.6 Boot Settings
3.6.1 Administrator Password
3.6.2 User Password
Type the password with up to 20 characters and then press Enter key. This will
clear all previously typed CMOS passwords. You will be requested to confirm the
password. Type the password again and press Enter key. You may press Esc
key to abandon password entry operation.
To clear the password, just press Enter key when password input window pops
UniPan-3XXX Series User Manual
58
up. A confirmation message will be shown on the screen as to whether the password
will be disabled. You will have direct access to BIOS setup without typing any
password after system reboot once the password is disabled.
Once the password feature is used, you will be requested to type the password each
time you enter BIOS setup. This will prevent unauthorized persons from changing
your system configurations.
Also, the feature is capable of requesting users to enter the password prior to
system boot to control unauthorized access to your computer. Users may enable the
feature in Security Option of Advanced BIOS Features. If Security Option is set to
System, you will be requested to enter the password before system boot and when
entering BIOS setup; if Security Option is set to Setup, you will be requested for
password for entering BIOS setup.
3.7 Security Settings
Setup Prompt Timeout [1]
Bootup Numlock State
UniPan-3XXX Series User Manual
59
[On]
[off]
Quiet Boot
[Disabled]
[Enabled]
Fast Boot
[Disabled]
[Enabled]
Boot Option Priorities
Boot Option #1
Sets the system boot order
Hard Drive BBS Priorities [SATA PM:*** … ]
Boot Option #1
SATA PM:***…
******
Disabled
3.8 Save & Exit Settings
UniPan-3XXX Series User Manual
60
Save Changes and Exit
Save & Exit Setup save Configuration and exit ?
[Yes]
[No]
Discard Changes and Ext
Exit Without Saving Quit without saving?
[Yes]
[No]
Save Changes and Reset
Save & reset Save Configuration and reset?
[Yes]
[No]
Discard Changes and Reset
Reset Without Saving Reset without saving?
[Yes]
[No]
Save Changes
Save Setup Values Save configuration?
[Yes]
[No]
Discard Changes
Load Previous Values Load Previous Values?
[Yes]
[No]
Restore Defaults
Load Optimized Defaults Load optimized Defaults?
[Yes]
[No]
Save user Defaults
Save Values as User Defaults Save configuration?
[Yes]
[No]
Restore user Defaults
Restore User Defaults Restore User Defaults?
[Yes]
[No]
UniPan-3XXX Series User Manual
61
Chapter 4 Installation of Drivers
This chapter describes the installation procedures for software and drivers under the
windows 7. The software and drivers are included with the motherboard. The
contents include Intel CORE TM SoC chipset driver, VGA driver, LAN drivers, Audio
driver, USB 3.0 Driver, Intel® AMT Driver Installation instructions are given below.
Important Note:
After installing your Windows operating system, you must install first the Intel
Chipset Software Installation Utility before proceeding with the installation of
drivers.
UniPan-3XXX Series User Manual
62
4.1 Intel(R) CORE TM SoC Chipset
To install the Intel chipset driver, please follow the steps below.
Step 1. Select 1-Chipset from the list and run SetupChipset.exe
Step 2. Click Next to setup program.
UniPan-3XXX Series User Manual
63
Step 3. Read the license agreement. Click Accept to accept all of the terms of the
license agreement.
Step 4. Click Install to begin the installation.
UniPan-3XXX Series User Manual
64
Step 5. Click Finish to complete the setup process.
4.2 Intel(R) VGA Chipset
To install the VGA drivers, follow the steps below to proceed with the installation.
Step 1.Select Intel(R) VGA Chipset from the list .
UniPan-3XXX Series User Manual
65
Step 2. Select x86 (for 32bit) or x64 (for 64bit) and run Setup.exe
Step 3. Click Automatically run WinSAT and enable the Windows Aero desktop
theme(if supported). Click Next.
UniPan-3XXX Series User Manual
66
Step 4. Read license agreement. Click Yes.
Step 5. Click Next to continue.
UniPan-3XXX Series User Manual
67
Step 6. Click Next to continue.
Step 7 . Select Yes, I want to restart this computer now. Then click Finish to
complete the installation.
UniPan-3XXX Series User Manual
68
4.3 Intel(R) LAN Driver
To install the Intel (R) LAN driver, please follow the steps below.
Step 1. Select Intel(R) 82574L LAN Driver from the list.
Step 2. Select 32bit or 64bit OS and run the program in folder.
UniPan-3XXX Series User Manual
69
Step 3. Click Next.
Step 4. Read license agreement. Click I accept the terms in the license agreement.
Click Next.
UniPan-3XXX Series User Manual
70
Step 5. Click Next to continue.
Step 6. Click Install to begin the installation.
UniPan-3XXX Series User Manual
71
Step 7. Click Finish to exit the wizard.
4.4 Realtek ALC662 HD Audio Driver
To install the Realtek ALC662 HD Audio Driver, please follow the steps below.
Step 1. Select 4-AUDIO from the list and run Setup.exe in folder
UniPan-3XXX Series User Manual
72
Step 2. Click Next to continue.
Step 3. Click Yes, I want to restart my computer now. Click Finish to complete the
installation.
UniPan-3XXX Series User Manual
73
4.5 USB 3.0 Driver
To install the USB 3.0 Driver, please follow the steps below.
Step 1. Select 5-USB 3.0 from the list and run Setup.exe in folder.
Step 2. Click Next to continue.
UniPan-3XXX Series User Manual
74
Step 3. Read the license agreement. Then click Yes to continue.
Step 4. Click Next to continue.
UniPan-3XXX Series User Manual
75
Step 5. Click Next to continue.
Step 6. Select Yes, I want to restart this computer now. Then click Finish to complete
the installation.
UniPan-3XXX Series User Manual
76
4.6 Intel(R) AMT Driver
To install the Intel(R) AMT Driver, please follow the steps below.
Step 1. Select 6-MEI from the list and run Setup.exe in folder.
Step 2. Click Next to continue.
UniPan-3XXX Series User Manual
77
Step 3. Read the License Agreement and then click Yes to continue.
Step 4. Click Next to continue.
UniPan-3XXX Series User Manual
78
Step 5. Select Yes, I want to restart this computer now. Then click Finish to complete
the installation.
UniPan-3XXX Series User Manual
79
Chapter 5 Touch Screen Installation
This chapter describes how to install drivers and other software that will allow your
touch screen work with different operating systems.
5.1 Windows 7/8/8.1 Universal Driver Installation for
PenMount 6000 Series
Before installing the Windows 7/8/8.1 driver software, you must have the Windows
7/8/8.1 system installed and running on your computer. You must also have one of
the following PenMount 6000 series controller or control boards installed: PM6500,
PM6300.
5.1.1 Installing Software(Resistive Touch)
If you have an older version of the PenMount Windows 7 driver installed in your
system, please remove it first. Follow the steps below to install the PenMount
DMC6000 Windows 7 driver.
Step 1. Insert the product CD, the screen below would appear. Click Touch Panel
Driver from the list.
UniPan-3XXX Series User Manual
80
Step 2. Select Resistive Touch.
Step 3. Click Next to continue.
UniPan-3XXX Series User Manual
81
Step 4. Read the license agreement. Click I Agree to agree the license agreement.
Step 5. Choose the folder in which to install PenMount Windows Universal Driver.
Click Install to start the installation.
UniPan-3XXX Series User Manual
82
Step 6. Wait for installation. Then click Next to continue.
Step 7. Click Continue Anyway.
UniPan-3XXX Series User Manual
83
Step 8. Click Finish to complete installation.
5.1.2 Installing Software (Projected Capacitive)
Step 1. Insert the product CD, the screen below would appear. Click touch panel
driver from the list.
UniPan-3XXX Series User Manual
84
Step 2. Select Projected Capacitive.
Step 3. Click Next to continue.
UniPan-3XXX Series User Manual
85
Step 4. Select I accept the terms of the license agreement. Click Next.
Step.5. Click Next to continue.
UniPan-3XXX Series User Manual
86
Step 6. Click Install RS232 interface driver. Then click Next to continue.
Step 7. Select None. Click Next.
UniPan-3XXX Series User Manual
87
Step 8. Click OK to continue.
Step 9. Click Support Muti-Monitor System. Click Next.
Step 10. Go to C:\Program Files\eGalaxTouch. Click Next.
UniPan-3XXX Series User Manual
88
Step 11. Click Next.
Step 12. Click Create a eGalaxTouch Utility shortcut on desktop. Click Next.
UniPan-3XXX Series User Manual
89
Step 13. Wait for installation.
Step 14. Click Yes to do 4 point calibration.
5.2 Software Functions
5.2.1 Software Functions(Resistive Touch)
Upon rebooting, the computer automatically finds the new 6000 controller board.
The touch screen is connected but not calibrated. Follow the procedures below to
carry out calibration.
1. After installation, click the PenMount Monitor icon “PM” in the menu bar.
2. When the PenMount Control Panel appears, select a device to “Calibrate.”
PenMount Control Panel(Resistive Touch)
The functions of the PenMount Control Panel are Device, Multiple Monitors ,Tools
and About, which are explained in the following sections.
UniPan-3XXX Series User Manual
90
Device
In this window, you can find out that how many devices be detected on your system.
Calibrate
This function offers two ways to calibrate your touch screen. ‘Standard Calibration’
adjusts most touch screens. ‘Advanced Calibration’ adjusts aging touch screens.
Standard Calibration
Click this button and arrows appear pointing to red
squares. Use your finger or stylus to touch the red
squares in sequence. After the fifth red point calibration
is complete. To skip, press ‘ESC’.
Advanced Calibration
Advanced Calibration uses 4, 9, 16 or 25 points to
effectively calibrate touch panel linearity of aged touch
screens. Click this button and touch the red squares in
sequence with a stylus. To skip, press ESC’.
Step 1. Please select a device then click “Configure”. You can also double click the
device too.
UniPan-3XXX Series User Manual
91
Step 2.Click “Standard Calibration” to start calibration procedure
UniPan-3XXX Series User Manual
92
NOTE: The older the touch screen, the more Advanced Mode calibration points
you need for an accurate calibration. Use a stylus during Advanced Calibration for
greater accuracy. Please follow the step as below:
Step 3.Come back to “PenMount Control Panel” and select Tools then
click Advanced Calibration.
Step 4. Select Device to calibrate, then you can start to do Advanced Calibration.
UniPan-3XXX Series User Manual
93
NOTE: Recommend to use a stylus during Advanced Calibration for greater
accuracy.
Plot Calibration Data
Check this function and a touch panel linearity
comparison graph appears when you have finished
Advanced Calibration. The blue lines show linearity
before calibration and black lines show linearity after
calibration.
Turn off EEPROM
storage
The function disable for calibration data to write in
Controller. The default setting is Enable.
Setting
UniPan-3XXX Series User Manual
94
Touch Mode
This mode enables and disables the mouse’s ability to drag
on-screen icons – useful for configuring POS terminals.
Mouse Emulation – Select this mode and the mouse
functions as normal and allows dragging of icons.
Click on Touch – Select this mode and mouse only provides a
click function, and dragging is disables.
Beep Sound
Enable Beep Sound – turns beep function on and off
Beep on Pen Down – beep occurs when pen comes down
Beep on Pen Up – beep occurs when pen is lifted up
Beep on both – beep occurs when comes down and lifted up
Beep Frequency – modifies sound frequency
Beep Duration – modifies sound duration
Cursor Stabilizer
Enable the function support to prevent cursor shake.
Use press and
hold as right click
You can set the time out and area for you need.
About
This panel displays information about the PenMount controller and driver version.
Multiple Monitors
Multiple Monitors support from two to six touch screen displays for one system. The
PenMount drivers for Windows 7/8/8.1 support Multiple Monitors. This function
supports from two to six touch screen displays for one system. Each monitor
UniPan-3XXX Series User Manual
95
requires its own PenMount touch screen control board, either installed inside the
display or in a central unit. The PenMount control boards must be connected to the
computer COM ports via the USB interface. Driver installation procedures are the
same as for a single monitor. Multiple Monitors support the following modes:
Windows Extends Monitor Function
Matrox DualHead Multi-Screen Function
nVidia nView Function
NOTE: The Multiple Monitor function is for use with multiple displays only. Do not
use this function if you have only one touch screen display. Please note once you
turn on this function the rotating function is disabled.
Enable the multiple display function as follows:
1. Check the Enable Multiple Monitor Support box; then click Map Touch Screens
to assign touch controllers to displays.
2. When the mapping screen message appears, click OK.
UniPan-3XXX Series User Manual
96
3. Touch each screen as it displays “Please touch this monitor”. Following this
sequence and touching each screen is called mapping the touch screens.
4. To uching all screens completes the mapping and the desktop reappears on the
monitors.
5. Select a display and execute the “Calibration” function. A message to start
calibration appears. Click OK.
UniPan-3XXX Series User Manual
97
6. “Touch this screen to start its calibration” appears on one of the screens. Touch
the screen.
7. “Touch the red square” messages appear. Touch the red squares in sequence.
8. Continue calibration for each monitor by clicking Standard Calibration and
touching the red squares.
NOTES:
1. If you use a single VGA output for multiple monitors, please do not use the
Multiple Monitor function. Just follow the regular procedure for calibration on
each of your desktop monitors.
2. The Rotating function is disabled if you use the Multiple Monitor function.
3. If you change the resolution of display or screen address, you have to redo Map
Touch Screens, so the system understands where the displays are.
About
This panel displays information about the PenMount controller and this driver
version.
PenMount Monitor Menu Icon
The PenMount monitor icon (PM) appears in the menu bar of Windows 7/8/8.1
system when you turn on PenMount Monitor in PenMount Utilities.
PenMount Monitor has the following function
UniPan-3XXX Series User Manual
98
Control Panel
Open Control Panel Windows
Beep
Setting Beep function for each device
Right Button
When you select this function, a mouse icon appears in
the right-bottom of the screen.
Click this icon to switch between Right and Left Button
functions.
Exit
Exits the PenMount Monitor function.
Configuring the Rotate Function
1. Install the rotation software package.
2. Choose the rotate function (0°, 90°, 180°, 270°) in the 3rd party software. The
calibration screen appears automatically. Touch this point and rotation is
mapped.
NOTE: The Rotate function is disabled if you use Monitor Mapping
UniPan-3XXX Series User Manual
99
5.2.2 Software Functions(Projected Capacitive)
General
In this window, you can see there is USB Controller. Click OK to continue.
Monitor Mapping
to adjust touch panel
Add
to search for device
Loading...