Uniteck Unisun 5.12M, Unisun 10.12M, UNICONNECT, Unisun 10.12P, Unisun 20.12M Series Manual

Unisolar 20.24 W

EN

UNISUN - UNICONNECT

Uniconnect : fast solar connection kits

Unisun : high-performance solar modules

!

IMPORTANT

 Dust and dirt on the glass face reduce power production. Clean regularly your panel,

using a soft cloth or a soft brush and soapy water (corrosive products banished).

 Setting up Unisun modules in direct contact with the roof (without Unifix mounting

bracket) is banished.

25/03/2013

 Panel coupling: couple panels with equivalent powers (3 panels maximum).

www.uniteck.fr CO00054

UNISUN PANELS : TECHNICAL SPECIFICATIONS

Dear customers, thank you very much for purchasing. Please read carefully and thoroughly all the
instructions before using the product.

Unisun is the high-performance monocrystalline module range for leisure applications (boating, camper
van), off-grid or signs.

Their multi-layer structure ensures an exceptional performance even in case of low sunshine or heat
conditions. Their high transmissibility tempered glass and their anodized aluminium frame preserve them
from external attacks (impacts, oxidation, corrosion).

With their anti hot-spot system, the panels are protected against the hotspot effects that can occur with
cells occupation.

The Unisun range is composed of compact panels which optimize the available space. Adjustable for more
power, connecting them in series or parallel is facilitated by their MC4-type solar connectors.

For the module/solar charge controller/battery connection, we recommend the Uniconnect ready-to-use
kits which optimize your electrical performances and make your installation easier:

- Uniconnect 1.6 = 1 module connection

- Uniconnect 2.6 = 2 modules connection

- Uniconnect 3.6 = 3 modules connection

SAFETY INSTRUCTIONS

 Take appropriate measures to prevent accidents during the mounting work.
 If the module or the bracket are exposed to sunlight for a long time, there is a risk of burns. Protect

 Once the work is achieved, check that your mounting brackets and modules are perfectly fixed.
 During the maintenance, please disconnect the solar system. Connection cables must never be

RECOMMENDATIONS

 Set the Unisun modules on surfaces presenting a sufficient lift. Consider the extra charge with module

 The placement of the sensors influences your electrical performances. Choose the optimal

 Dust and dirt on the glass face reduce power production. Clean regularly your panel, using a soft

 Check regularly the quality of your module connections.

yourself.

powered up: risk of electrical arc.

+ bracket.

inclination and orientation depending on your environment. Avoid shadow areas or objects sources
of shade.

cloth or a soft brush and soapy water (corrosive products are banished).

2/16 www.uniteck.fr

Module 3

Module 2

Module 1

Roof pass

Solar charge

controller

Battery

1 m

max

(1)

1 m

max

(1)

8 m max

2 m max

4 m
max

(2)

1

2

1

 Connection : solar charge controller  battery

 Connection : module  solar charge controller

 Connection : solar charge controller  electrical device

Parallel connection

for more output power (W)

12V/50W + 12V/80W= 12V/110W

Series connection

for your 24V batteries :

12V/50W +12V/50W= 24V/50W

UNISUN PANELS : OVERVIEW AND WIRING

Before fixing and connecting, please respect :

- the maximum distances (indicated below between each element)

- the connection order

Unisun + Uniconnect Wiring

(1)

The distance between modules can be extended with one additional meter by adding a 612B and a 612R

Unicable (additional cables not provided with Uniconnect kits, optional).

(2)

Battery connexion kit 2 (not provided with Uniconnect kit, optional)

Series/parallel connection

Connection order

To disconnect, follow the opposite order. For more details, refer to the manual of your solar charge controller.

3/16 www.uniteck.fr

Unisun

5.12M

Unisun

10.12P

Unisun

10.12M

Unisun

20.12M

Unisun

20.24M

Unisun

50.12M

Unisun

80.12M

Unisun

100.12M

Unisun

145.12M

Distance of
fixation W
x H (mm)

140 x 195

289x188

120x34

183x34

420x260
120x260

420x260

120x260

420 x 500
120 x 500

860 x 500
127 x 500

860 x 500
127 x 500

1100 x 626

600 x 626

UNISUN PANELS : TECHNICAL SPECIFICATIONS

Distance between screws

COMPLIANCE STATEMENT

UNITECK testifies that the modules described in this manual :

UNISUN 5.12M / 10.12P / 10.12M / 20.12M / 50.12M / 80.12M / 100.12M / 145.12M are

manufactured in compliance with the European directives.
It complies with the harmonised standards:

- IEC 61215 & IEC 61730

CE date of tagging: January 2013.

01/01/2013 Yoann Fourmond
Société Uniteck General Manager
132 rue Pierre Simon Marquis de Laplace
34500 Béziers

WARRANTY

The warranty covers all defects or manufacturing flaws for 1 year from the day of purchase (pieces and
workforce).
The warranty does not cover:

- the normal wear of the pieces (for ex.: cables, etc.).

- incidents due to a bad use, fall, disassembly, or any other damage due to the transport.

In case of failure, return the device to your supplier, and join :

- a dated proof of purchase (cashier’s receipt, bill…).

- an explanatory note of the failure.

Caution : Our after-sales service does not accept postage due returns.
After the warranty, our after-sales service ensures repairs after acceptance of a quotation.
After-sales service contact : Uniteck-132 rue Pierre Simon Marquis de Laplace
34500 Béziers -France
E-mail: [e-mail] Fax: [phone]

4/16 www.uniteck.fr

UNISUN

5.12M

UNISUN

10.12P

UNISUN

10.12M

UNISUN

20.12M

UNISUN

20.24M

Performance

Max power (Pm)*

5 W

10 W

10 W

20 W

20 W

Power range*

0/+3%

0/+3%

0/+3%

0/+3%

0/+3%

Operating voltage

12 V

12 V

12V

12 V

24 V

Technology

Mono.

Poly.

Mono.

Mono.

Mono.

Voltage at maximum power (Vmp)*

17,4 V

17,4 V

17,6 V

17,6 V

35,2 V

Intensity at maximum power (Imp)*

0,29 A

0,57 A

0,57 A

1,14 A

0,57 A

Open circuit voltage (Voc)

21,6 V

21,6 V

21,77 V

21,7 V

43,54 V

Short circuit current (Icc/Isc)

0,32 A

0,65 A

0,65 A

1,26 A

0,65 A

Min. intensity charge controller IMR
(=IMP +25%)

0,36 A

0,71 A

0,71 A

1,43 A

0,71 A

Solar cells efficiency

18 %

17 %

18,4%

15,8 %

18,4 %

Solar module efficiency

7,5 %

8,8 %

12,5 %

10,8 %

12,5 %

Temperature sensitivity

Operating temperature

-40 °C to
+85°C

-40 °C to
+85°C

-40 °C to
+85°C

-40 °C to +80
°C

-40 °C to
+85°C

NOCT/TUC**

45 +/- 2°C

45 +/- 2°C

45 +/- 2°C

45 +/- 2°C

45 +/- 2°C

Temperature ratio :

- Pm :

- Voc :

- Icc :

-0,48 %/°C

-0,34 %/°C
0,037 %/°C

-0,47 %/°C

-0,34 %/°C

0,045 %/°C

-0,48%/C°

-0,34%/C°

0,037%/C°

-0,50 %/°C

-0,35 %/°C

-0,060 %/°C

-0,48%/C°

-0,34%/C°

0,037%/C°

Mechanical characteristics

Cells dimensions

62,5 x

15,6mm

78 x 26 mm

62,5 x 31,25

mm

62,5 x

62,5mm

125 x 15,5

mm

Number of cells

36 (4x9)

36 (4x9)

36 (4x9)

36 (4x9)

72 (4x18)

Module dimension

216 x 306

x 18 mm

310 x 368

x 18 mm

310 x 383 x

35 mm

660 x 310

x 35 mm

310 x 660 x

35 mm

Cable length

- - 900 mm

300 mm

900 mm

Module weight

0,8 kg

1,5 kg

1,5 kg

2,5 kg

2,5 kg

UNISUN PANELS : TECHNICAL SPECIFICATIONS

* Under standard test conditions (STC) : sunshine - 1 000 W/m2, AM 1.5, cells temperatures (25 °C)

** Nominal operating cell temperature : sunshine - 800 W/m²,

With an ambient temperature of 25 °C and a wind of 1 m/s.

5/16 www.uniteck.fr