Page 1
MS920P Quick Start Guide
Step 1:
connect and Charge
MicroUSB
The Unitech MS920P 2D Pocket Scanner
Step 3:
Scan the barcode on the USB Dongle.
Scan Dongle
1. Flip the rubber cover up to expose the micro USB port on the scanner.
2. Plug the micro USB cable into the port on the scanner and into a free USB port of a host computer.
Charge for 4 hours.
Step 4:
Plug the USB Dongle to a free USB port of
a host computer.
The MS920P is now ready to use.
Connect dongle to host
Step 5:
Test & Finish
Open a word processing program or app such as
Microsoft Word or Notepad on your host device.
Now scan the following barcode:
If the word “Unitech” appears on the screen
you have succesfully connected your scanner.
Congratulations!
COmmunication mode
RF HID *
Silence
COmmunication mode COmmunication mode
RF SPP USB
silence MS920P TIPS
• The MS920P should be recognized as a generic HID device
by your host device, similar to a standard keyboard. This
allows you to scan into any field you could normally type into.
Silence off * Silence on
• If the MS920P is out of RF transmitting range from the host
device, it will automatically save any scan data in its buffer
memory and automatically upload the scan data to the host
when back in RF transmitting range.
• The MS920P can also operate in Batch Mode, where a
RF transmitting connection is not required. In Batch Mode,
the MS920P saves all scan data in internal memory and then
uploads the data when connected to a host. See back page
of this guide for more information about modes and settings.
Page 2
MS920p Quick Start Guide
Factory Default
Vibration on/off
Switch to Batch mode
Enable Batch Mode
Scan here to switch from Auto Mode to Batch Mode.
Data will now be stored in the internal memory of
the MS920P and the MS920P will no longer transmit
data via RF.
switch to auto Mode ( Default )
P
. They are optional.
TRANSFER DATA
Transfer Data
Scan here to send data from the MS920P to your
host device after collecting the data in Batch Mode.
DISCONNECT PAIRING
DELETE DATA ( Batch mode )
1
2
Scan these barcodes if you wish to erase the data
stored on your MS920P. Please keep in mind that
this process is irreversible.
DELETE DATA ( auto mode )
Enable Auto Mode Disconnect Pairing
Scan here to switch back to Auto Mode.
You can now pair the MS920P with a host.
vibration
Scan here to unpair the RF connection
between the MS920P and the host device.
RESTORE FACTORY DEFAULT SETTINGS
This factory default barcode will return your
scanner to its original factory settings, a useful
feature for troubleshooting purposes.
1
2
Scan these barcodes if you wish to erase the data
stored in the MS920P’s buffer memory.
Volume
Volume Up
Volume Down
display f/w version
Display F/W Version 1 Minute 3 Minute 5 Minute Never
Try a Unitech
wireless pocket scanner
for your smartphone,
tablet, or computer
RF Module Power Saving
All-Purpose Pocket Scanner Memory Pocket Scanner 2d Pocket Scanner
mug fo kcap a fo eziS •
,SOi htiw elbitapmoc htooteulB •
Android, Windows
yromem BM 2 •
gninnacs hctaB dna otuA •
yromem BM 2 •
sedocrab D2/D1 sdaeR •
laes latnemnorivne 24PI •
© 2015 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Loading...