Unitech MS652 Quick Start Manual

MS652

Wearable 2D Ring Scanner

Quick Start Guide

Version 1.1

401359G

Charging

Flip open the USB cap on MS652, plug the USB cable into the port on
the scanner and into a USB port on the host computer.

Test & Finish

Open a word processing program such as
Microsoft Word or Notepad and scan the
following barcode:

If the word “unitech” appears on the
screen you have successfully installed
your scanner.

MS652 TIPS

●

The MS652 should be recognized as a
generic HID device by your host device,
similar to a standard keyboard. This
allows you to scan into any field you could
normally type into.

• If the MS652 is out of wireless range from
the host device, it will automatically save
any scan data in its buffer memory and
automatically upload the scan data to the
host when back in wireless range.

• The MS652 can also operate in Batch
Mode, where a wireless connection is not
required. In Batch Mode, the MS652
saves all scan data in the internal memory
and then uploads the data when
connected to a host.

Operation Mode

Wedge Batch Auto

*

MS652 Pairing

Note: 1. If MS652 is connected to a host, un-pair will not work. Please remove pairing or turn bluetooth off from the host side first & try again.

2. If there is trouble to remove pairing on host device, turn off MS652 & try again. After pairing on host is removed,
scan ‘BLE Un-Pair/Pair’ for new pairing.

3. If ‘Higher Level RF Signal Checking’ is selected, BLE communication will become more reliable but the distance will be shorter.

* Default Option

Thank you for purchasing the unitech product.
For other product documentation, please scan the QR code for more information.

●NFC Pairing with Mobile Devices (BT HID Mode)

Step 1. Ensure your mobile device supports NFC and that it is enabled.
Step 2. MS652 will automatically enter BT pairing mode.
Step 3. Turn both NFC & Bluetooth on your mobile device.
Step 4.

NFC tag is embedded on the backside of housing nearby unitech logo.

Touch near the unitech logo area of the MS652 scanner to your mobile
phone, until the device prompts to accept pairing.

Step 5. Press ok to respond your Bluetooth pairing request.

Step 6. MS652 is now connected to your mobile phone.

●Pairing with Mobile Devices (w/o NFC)

Step 1. Go to your host device settings and turn the Bluetooth function on.
Step 2. MS652 will automatically enter BT pairing mode.
Step 3. The MS652 will appear on your device as “MS652-XXXX.”

Step 4. Select “MS652-XXXX.”

Step 5. “MS652-XXXX” will now appear as paired. Proceed to “Test & Finish.”

●

Pairing with PC / Notebook (BT HID Mode)

Step 1. Open “Devices and Printers” by clicking the Start button and then, on
the Start menu, clicking Devices and Printers.

Step 2. MS652 will automatically enter BT pairing mode.

Step 3. Click “Add a device,” and then follow the instructions.

Step 4. Click the Bluetooth enabled device (MS652-XXXX) you want to add
to your computer, and then click Next. If you don't see the device you
want to add, make sure the device is turned on and discoverable.
If you just turned on the device, it may take Windows several seconds
to detect it.

Bluetooth Config

BLE Un-Pair / Pair Normal Level RF Signal Checking *

Higher Level RF Signal Checking

*

MS652

Wearable 2D Ring Scanner

Quick Start Guide

System Config & Info

Data & Memory

Beeper Control

Vibrator Control

Auto Power Off After Idle

Factory Default Connect USB Drive

Erase

Erase Last Data Entry

Free Buffer / Drive SpaceSend Batch

Mute

Low Volume

Medium Volume

*

High Volume

Disable Vibrator

*

Enable Vibrator

Display F/W Version

Enter Auto Buffer Erase

Enter Batch File Erase

5 Minutes

15 Minutes

30 Minutes

1 Hour

2 Hours

4 Hours

Disable

Version 1.1

401359G

* Default Option

Thank you for purchasing the unitech product.
For other product documentation, please scan the QR code for more information.

Note: To erase buffer, scan ‘Enter Auto Buffer Erase’ and then scan ‘Erase’.
To erase batch file , scan ‘Enter Batch File’ and then scan ‘Erase’.

*

6 Hours

Note：This setting is for all functions, for specific indicator setting,
please refer to the user's manual on the unitech website.