Unitech KP3700 Specifications
KEYBOARDS
KP3700 Keyboard
The KP3700 is a part of a family of Unitech multifunction
keyboards with 104 keys enhanced layout. The KP3700
features re-legendable keys,
integrated Magnetic Stripe
Card Reader (or Bar Code
Slot Reader), and built-in
Bar Code scanning input
port. The keyboards also
feature a minimal footprint
and protection against
damage from liquid spillage.
Of the KP3700’s 104 keys, 92 are programmable and 88 are relegendable.
With Unitech’s Keyboard Configuration Manager software, each of the 92 programmable keys
can be easily configured to be modifiable by virtually all the other keyboard keys (not only Shift S,
but also Ctrl S or even LS, for instance) so that each key can represent 101 unique inputs.
Relegending the KP3700’s keys is as easy as popping off the clear key cap and inserting a new key
label.
Keyboard Configuration Manager also makes it easy to define the output from the built-in magnetic stripe slot reader or from a scanner attached to the KP3700’s built-in scanner port to exactly
the format you require.
Input Modes
The keyboard has two modes to accept a variety of input devices.
A DB-9 type squeeze release port at the upper right hand side of the keyboard supports
•
undecoded bar code scanner and RS232 input. Decoded scanners must be capable of Wand
Emulation (undecoded scanner) output. Wand, CCD, and laser scanners are supported.
A card-reader slot at the upper-left corner of the keyboard provides an enclosure for a built-in
•
dual-track magnetic card reader (included). Alternatively, this card-reader slot can support a
single-track or triple-track magnetic card reader, or a bar code slot reader.
KP3700 Specifications
Keyboard
Interface:
Keys: 104 total keys
Cursor Control: Cursor Keys
Enhanced AT, PS/2 keyboard
5-pin DIN / 6-pin mini DIN male coiled cable
92 programmable keys
88 relegendable keys
Power:
Dimensions:
(L x W x H)
Operating:
Storage:
Magnetic Stripe Card Reader
Track Configuration:
Durability:
Voltage: 5 VDC +/- 5%
Current: 250mA
(including magnetic stripe reader)
17.5” x 6.75” x 1.375”
(445 x 171 x 35 mm)
1.30 kg (2.86 lbs)Net Weight:
Temperature: 32
Humidity: 10% to 90% RH
Temperature: -4
Humidity: 10% to 95% RH
ISO 7811/2 through 5Card Standard:
Read ISO single track, dual track, triple
track
Bi-directional for ISO cardCard Feed:
5 to 60 IPS (inch per second)Card Swipe Speed:
Reads 75 to 210 BPIBit Density:
300,000 passes in a clean environment
(minimum)
o
F (0oC) to 131oF (55oC)
o
F (-20oC) to 131oF (55oC)
Bar Code Decoder Unit
Port: DB-9 male
Symbologies:
UnitUnit
ecec
h Americah America
Unit
ec
h America
UnitUnit
ecec
h Americah America
Los Angeles
1-800-861-8648
Specifications subject to change without notice. Copyright 2003 Unitech Electronics Co., Ltd.. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Microsoft is a registered trademarks of Microsoft Corporation. All other trademarks are the property of their respective owners. U.S.A. (07/00)
UnitUnit
Unit
UnitUnit
TTLInterface:
Code 39 Standard and Full ASCII,
UPC\EAN, Codabar, Interleaved 2 of 5,
Standard 2 of 5, Code 128, Code 93,
MSI code, Code 32, Delta Distance Code,
Label IV & V, Toshiba Code, UCC/EAN128.
UnitUnit
ecec
h Eurh Eur
ecec
h Chinah China
ec
h China
ecec
h Chinah China
Xiamen
UnitUnit
Unit
UnitUnit
ecec
h Electrh Electr
ec
h Electr
ecec
h Electrh Electr
Taipei
onicsonics
onics
onicsonics
Unit
UnitUnit
Amsterdam
ec
ecec
h Eur
h Eurh Eur
opeope
ope
opeope
www.unitech-adc.com
UnitUnit
Unit
UnitUnit
ecec
h Japanh Japan
ec
h Japan
ecec
h Japanh Japan
Tokyo
Loading...