Unitech AS10 Quick Start Manual

AS10 Quick Start Guide

The following steps will walk you through the installation process.

Connecting and disconnecting the interface cable

An audible “click” sound indicates the interface cable has been plugged in correctly and the connector lock is engaged. To unplug the interface cable,
release the connector lock by inserting one end of a paperclip into the handle.

Paperclip

Connect to host via USB

Plug the interface cable into a free USB port of a host computer.

The Unitech AS10 Linear Imager Scanner

Installation Instructions & Popular Conguration Settings

SETUP AND INSTALLATION

Plug the PS/2 cable into the keyboard port on your host computer.

Connect to host via PS/2

SETTINGS AND CONFIGURATION Enter Mode

You may wish to set your scanner to “Tab Mode.” In this mode, data
will tab over to the next column as you scan. Scan this series of
barcodes to switch to Tab Mode from the default Enter Mode.

1

2

3

4

11

2

3

4

Tab Mode

Scan this series of barcodes to switch back to Enter mode. In Enter
Mode, data will jump to the next line as you scan.

Flash Mode

Scan this series of barcodes to switch to Flash Mode from the default
Trigger Mode. In Flash mode, the AS10 will function automatically. It
will scan at a set interval.

1

2

3

4

The following section covers the most common conguration
settings for your AS10 scanner.

For additional conguration options please visit

unitechscanners.com/AS10 and select the “Download” tab.

You will nd the User’s Manual and a variety of other resources.

Open a word processing program such as Microsoft Word or
Notepad on your host. Now scan the following barcode:

Test & Finish

If the word “Unitech” appears on the screen you have succesfully
installed your scanner. Congratulations!

AS10 Quick Start Guide

HOW CAN WE HELP YOU?

Scan here to return your scanner to its original factory settings, a
useful feature for troubleshooting purposes.

Default Settings

The AS10 is a plug-and-play scanner. It does not require a
driver and should be recognized as a generic HID device by
your computer, similar to a standard keyboard. This allows you

to scan into any eld that you could normally type into.

Unitech’s professional support team is available to quickly

answer questions or technical-related issues. Should equipment
issues occur, please contact a Unitech Service Representative
at [phone] for more information.

Trigger Mode

Scan this series of barcodes to switch back to Trigger Mode. In Trigger
Mode, the AS10 will scan only when the scanner button is pressed.

1

2

3

4

%$ +

/ 2