UNI-T UTP3300C Series, UTP3305C, UTP3303C User Manual

UTP3000C Series User Manual

Safety Overview

This section discusses the UTP3000C series safety instructions and storage

conditions. Please read the information below carefully before using the device.

Safety Symbols

These symbols will be presented in the manual or the device.

Caution

Risk of Electric Shock

Ground Terminal

Safety Guide

General

• Donot cover the air inlet and fan outlet.

• Avoid physical impact or improper usage of the device.

• Perform ESD protection for the device

• Donot open the device if you are not a specialist.

AC Input

• AC Voltage Input: 100V/120V/220V/230V, 50/60Hz

• Connect ground wire to avoid electric shock

Fuses

The fuses models of the device are:

• Make sure correct fuse is used before power on.

• Replace all broken fuses with fuses of correct specification and rated value.

• Donot connect device to power socket before replacing any fuses in order to

prevent electric shock.

• Find out the reason of broken fuse before replacing.

Model
UTP3303C
UTP3305C

110V/120V 220V/230V
T4A/250V(20X5mm) T2A/250V(20x5mm)
T8A/250V(20X5mm) T5A/250V(20x5mm)

1

UTP3000C Series User Manual

Profile

UTP3000C Series Programmable DC Power Suppliesare high precision 4-bit
display devices with 3-way output. It is built with voltage and current overload
protection, convenient operation panel,and one key storage recall. It can be used in
aging test, electronics circuit behavior test, and automated system test of different
environments. This device is suitable to use in education fields such as special trade
schools, universities, colleges, and research labs.

Main Features

• Precise 4-bit voltage & current display

• Settable voltage & current overload protection

• 5 sets of storage recall

• Power-off memory

• Software calibration

• Keyboard lock

• Low operation noise

• Out-of-range temperature protection

• USB and RS232 interface

2