
This manual contains important safety precautions and information of correct use.
Please be sure to read this manual carefully before use so as to avoid any accidents.
Do not place the product in hot, wet or dusty environment, especially in Summer, do not leave the
product inside a car with all windows closed.
Avoid dropping, impacting or shaking the product violently, otherwise it may cause damages or
malfunctions. Select a proper volume to avoid ear problem when using earphones.
Be sure to use the provided chargers and accessories in the package.
Be sure to charge the product when the following situations take place,
- The battery icon shows lower or empty.
- Operation keys do not respond properly.
- The device shows
on the top right corner.

Specifications
Hardware
10.1”High Definition TFT LCD Touch Screen (1024x 600 pixels)
Capacitive multi-touch (5 touch) point function
CPU: Allwinner A20 Dual Core
RAM: DDR3 1GB
Wi-Fi (IEEE802.11 b/g/n) for internet connection
USB host for OTG function
G-sensor
Micro SD card slot recognizing up to 32GB
Built-in speaker & Built-in MIC
5V DC power adapter
Compatible with Bluetooth devices
Software
Android 4.2
Google browser
Wi-Fi connection
e-Book function (all e-book formats supported by application)
VoIP phone function with Wi-Fi connection
Video: AVI, RM/ RMVB, FLV, MPG4 – 1, MPEG – 2 etc.
Audio: MP3, WMA, AAC, WAV etc.
Photo: JPEG, BMP, GIF, PNG, TIFF

Name
Important Notice
- If the device is freezing or stuck, press
the reset button (a small hole) or long
press power button for 7 seconds.
- When the performance is slow after using
some applications, it is recommended to
close running application in setting menu.
charging, be sure to use the power adapter(DC
provided in the package,
does not work.
- T device is equipped with high
performance processor. It may heat in
case of using long or whi
charging.

1. Power On/Off
2. Desktop
After turning on the device, desktop displays with shortcut icons and arrow panel at the right side
Page 4

3. Standby mode (Screen off mode) /
Unlock the screen
After standby mode o, slide the lock icon in order to unlock the screen.

4. System settings
On the desktop, press menu button and select system settings.