UNISTRONG SCIENCE and TECHNOLOGY UT10 User Manual

UT10

Quick Start Guide

Earpiece

Front camera

Custom side button

Menu button

Ambient light sensor

Increase volume

Decrease volume

Home screen button

Back button

Microphone

Extended
function button 1

Speaker

Power buttonCustom button

Extended
function button 2

Rear camera

External device docking station

External antenna port

Battery cover lock

TYPE-C interface Lanyard hole

1. Battery Charging

• Charge with travel charger
Insert the small plug end of the USB data cable into the TYPE-C port of the device, insert
the large plug end of the USB data cable into the travel charger plug, and then insert the
travel charger plug into a power outlet to charge.

• Charge with USB data cable
Insert the small plug end of the USB data cable into the TYPE-C port of the device, insert
the large plug end into the USB port of the computer to charge.

Note: During normal charging, the home screen status bar will display the charging icon

when screen is on.
When the charging is completed, the home screen status bar will display the full
battery icon when screen is on.

2. Install SIM card, memory card, battery

Power off the device before installing or removing the SIM card, MicroSD card or

battery.
Flip the device to its rear, follow the directions shown in Figure 1 and push the back cover
lock to the open position, and remove the battery cover. Install the SIM card and MicroSD
card according to the battery compartment label instructions, as shown in Figure 2.

Figure 1

SIM2 SIM1 Micro SD

Figure 2

• Face the SIM card metal contacts downwards and push into the slot. Take note on the direc-

tion of the notched corner.

• Face the MicroSD card metal contacts downwards and push into the slot. Take note on the

direction of the notched corner.

• Align the contacts of the battery with the terminals of the battery compart ment and put in the

battery gently.

• After the battery is installed, replace the battery compartment cover and push the back cover

lock to locked position to secure the battery compartment cover.