UNISTRONG SCIENCE and TECHNOLOGY AIR06 User Manual

Page 1
TM
User Manual
Bluetooth Tower Speaker
AIR 06
Item#
Page 2
Table of Contents
GENERAL INFORMATION
Introduction
Features
FCC Compliance
Parts Included in the Box
Description of Top Panel
OPERATION INSTRUCTION
Switching on/off AIR06
Pairing AIR06 with Bluetooth Devices
Music Playback
AUX Mode
Line in Mode
MAINTENANCE
Product Registration
Limited Warranty
Specifications
Trouble Shooting / FAQ
Contacting Customer Service
2
2
2
2
3
4
5
6
6
6
7
8
8
9
9
10
10
11
13
1
Page 3
FCC ComplianceIntroduction
Thank you for purchasing this Airing Bluetooth Tower Speaker product. This product has been manufactured with the highest standards of safety and quality. Traditionally designed adds elegant wooden box, 15Watts x 2 + 30W Stereo speaker output power, you surely will enjoy using
this speaker
Features
Dedicated design for indoor displaying
Solid wooden flourishing
Bluetooth Class 2, transmitting / receiving working distance
up to 10m
Support Bluetooth V2.0+EDR, Enhanced Data Transfer
Supports A2DP, AVRCP Bluetooth wireless audio profile for
use with iPhone, iPod touch, iPad and other Bluetooth enabled devices
15W x 2 + 30W Stereo speaker output power
Anti-interfering capability to increase stability and avoid
signal jammed with wireless devices like Wi-Fi and mobiles
Bluetooth Wireless Communication Technology
Bluetooth is a standard of close range radio-communication technology that was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba. With Bluetooth technology, we can achieve the highest transmission rate among cell phones, computers, printers, PDAs and other devices. The max transmission range of class II is 10 meters while the max transmission range of class I can reach up to 100 meters.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
3. Consult the dealer or an experience radio/TV technician for help.
)G[ZOUT 'T_INGTMKYUXSUJOLOIGZOUTYTUZK^VXKYYR_GVVXU\KJ H_ZNKVGXZ_XKYVUTYOHRKLUXIUSVROGTIKIU[RJ\UOJZNK[YKXY G[ZNUXOZ_ZUUVKXGZKZNOYKW[OVSKTZ 
This Class B digital apparatus complies with Canadian
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
ICES-003
.
2
3
Page 4
Parts Included in the Box
A. Bluetooth Speaker (x1) B. AC adapter (x1) C. Power Cable (x1) D. 3 pcs Screws and washer (x1) E. Line in Cable(x1)
Overview:
Front Side Rear
Top Panel
1
Power on/off button
2
DC in
3
Aux R/L
4
Description of Top Panel:
12
Overview:
Bluetooth LED indicator
1
Line in jack
2
Phone charge slot
3
Power on/off
4
Standby button
5
Function button
6
Volume-
7
Volume+
8
Skip backward
9
Play/Pause
10
Skip forward
11
Function LED indicator
12
4
5
Page 5
Operation Instruction
1. Switching on/off AIR06
Function
Switching on AIR06
Switching off AIR06
Remarks:
Power LED indicator is on as long as AIR06 is switched on.
You can switch off AIR06 to disconnect from the Bluetooth device.
2.Bluetooth Mode A. Pairing AIR06 with a Bluetooth cell phone
Please make sure your cell phone is Bluetooth-enabled. Specific pairing steps may vary with different cell phones. Please refer to the user manual of your cell phone for further information. The general pairing steps are as follows:
a) Keep AIR06 and Bluetooth cell phone within 1 meter when
pairing.
b) Press Standby button, BT LED indicator is on in green,
(Bluetooth LED indicator flashes in red and blue light
alternately). It will enter paring mode.
c) Switch on your cell phone s Bluetooth function and
search for Bluetooth devices. After the search is completed,
select “AIR06” from the Bluetooth device list.
d) According to indication, enter password or PIN No:
“0000” and press “Yes” or “confirm”.
Operation
Switch power
on/off button to on
Switch power
on/off button to off
'
LED indicator
Power LED indicator
flash in Red
Power LED indicator
is off
e) After successful pairing, select “AIR06” from the Bluetooth device list and press “connect”. The Bluetooth LED indicator will flash regularly every 3 seconds.
B. Pairing with a Bluetooth stereo transmitter
Different Bluetooth transmitters have different pairing ways. Please refer to the user manual of your Bluetooth transmitter for further information. The general pairing steps are as follows:
a) Keep AIR06 and Bluetooth transmitter within 1 meter when pairing. b) Press Standby button, BT LED indicator is on in green, (Bluetooth LED indicator flashes in red and blue light alternately). It will enter paring mode. c) Switch on your Bluetooth transmitter and let it enter pairing mode. d) The transmitter will search and connect with AIR06 automatically. After successful connecting, the Bluetooth LED indicator will flash in blue light every 3 seconds.
Remarks:
AIR06 will return to pairing mode automatically after
disconnecting from a Bluetooth device.
C. Music Playback Connecting with a A2DP cell phone or Bluetooth transmitter
a) Connect your cell phone or Bluetooth transmitter with AIR06. b) You can listen to your music from AIR06 now when playing it back. c) Press Vol+ to turn up the volume, press Vol- to turn down the volume. d) Press to skip to the previous song and long press to Rewind. e) Press to skip to the next song and long press to Fast Forward.
6
7
Page 6
Remarks:
If there is an incoming call while AIR06 is connected to your cell phone for music playback, it will pause at once when you answer the call and resume after the call ended. (Sometimes it will pause after end the call, it depend on your cell phone.) The buttons is unavailable when you connect AIR06 with a non-Bluetooth music player.
3. Aux Mode
Requires an RCA cable a) Connect RCA cable to Aux input. Connect the other end of the RCA cable to the audio output on your MP3, stereo system or television. b) Press STANDBY, the "BT"indicator will on in green, then Function button to switch to Aux mode. Aux LED indicator is on in green. c) Press Vol+ to turn up the volume, press Vol- to turn down the volume.
4. Line in Mode
Requires a 3.5mm cable a) Connect a 3.5mm cable to the LINE IN jack. Connect the other end of the 3.5mm cable to an MP3 or other audio source. b) Press STANDBY, the "BT"indicator will on in green, then Press
Function button to switch to Line in mode. Line in LED indicator is on in green. c) Press Vol+ to turn up the volume, press Vol- to turn down the volume
5. Charging your smart phone
You can charge your iPhone /iPod/smart phone via the Phone Charge slot either stand by or operation mode. Please ensure the main power switch at the rear of the unit is in ON position .
Press
Maintenance
Read the following recommendations before using AIR06. Following these you will be able to enjoy our product for many years.
Keep it dry and don't take it to damp places so as to avoid
the product's internal circuit being affected. Keep the product away from direct sunlight or hot places.
High temperature will shorten the life of electronic devices, destroy the battery or distort certain plastic parts. Don't expose the product to cold areas. It may damage the
internal circuit board. Don't try to disassemble the product as it may get
damaged if you are not professional. Don't let it fall down onto the floor or other har d surfaces.
The internal circuit might get damaged. Don't use intensive chemical products or detergent to
clean the product. Don't scratch the surface with sharp things.
Product Registration
Thank you for purchasing Airing Bluetooth Tower Speaker.
Please register your product at www.unistrongusainc.com for your warranty. P le as e r ef er enc e yo ur i te m# (AI R0 6) and /o r
UPC(851489004061) to register it. For technical assistance and more information, please feel
free to contact UniStrong technical support or customer service at www.unistrongusainc.com.
98
Page 7
Limited Warranty
The manufacturer warrants this product to be free from defects in
materials and workmanship for a period of one (1) year from date of
purchase. This warranty applies only to the original consumer
purchaser and only to products used in normal use and service. If
this product is found to be defective, the manufacturer's only
obligation, and your exclusive remedy, is the repair or replacement
of the product at the manufacturer's discretion, provided that the
product has not been damaged through misuse, abuse, accident,
modifications, alterations, neglect or mishandling. This warranty
shall not apply to any product that is found to have been improperly
installed, set-up, or used in any way not in accordance with the
instructions supplied with the product. This warranty shall not apply
to a failure of the product as a result of an accident, misuse, abuse,
negligence, alteration, or faulty installation, or any other failure not
relating to faulty material or workmanship. This warranty shall not
apply to the finish on any portion of the product, such as surface
and/or weathering, as this is considered normal wear and tear. The
manufacturer does not warrant and specially disclaims any liability
and shall not be liable for any consequential or incidental loss or
damage, including any labor/ expense costs involved in the
replacement or repair of said product.
Specifications
Bluetooth Version
Bluetooth Profile
Frequency Response
Operating Distance
Power Supply
Working Temperature
Storage Temperature
Dimensions
Weight
Bluetooth 2.0+EDR
A2DP V1.2 & AVRCP V1.4
32Hz - 17K Hz
10 meters, class II
18V 4A Adaptor
0°C~50°C
-20°C~60°C (in the original packing box)
37.41”H x 4.72”W x 6.69”D
13.86 lb
10
Trouble Shooting / FAQ
Problem Solution
AIR06 cannot be
powered on.
AIR06 cannot connect
to a Bluetooth device.
AIR06 is connected to
a Bluetooth cell phone
but doesn't play music.
The sound of AIR06
crackles or has a loud
hum or buzzing.
1.Make sure that the DC cord is firmly connected to the unit and the power outlet is turned on.
2.Ensure that the Power ON / OFF switch is at ON position. When the speaker is powered ON, the LED Indicator will be lighted up.
1.Ensure AIR06 already entered pairing mode.
2.Ensure the Bluetooth device is in the
effective working range.
3.Delete the AIR06 name entry from
your Bluetooth device paired memory list and re-pair your device with AIR06.
4.Ensure that both your Bluetooth
device and AIR06 are not connected to any other devices.
5.On some Bluetooth device, you may
need to select AIR06 as your default output device after pairing is completed.
1.Ensure your cell phone supports
Bluetooth A2DP or AVRCP profile.
2.Ensure your cell phone is in the
effective Bluetooth working range.
1.Turn your Bluetooth device or other
source component's volume down.
2.Unplug the power supply and connect
AIR06 to a different AC outlet.
3.Move unit away from potential
sources of interference, such as
microwave ovens, fluorescent lights, etc.
11
Page 8
Trouble Shooting / FAQ Contacting Customer Service
Problem Solution
AIR06 has no sound.
How far is the effective
range between AIR06
and a Bluetooth device?
What is A2DP?
What is AVRCP?
1.Verify that the volume is not muted.
2.Verify that there is no other device connected to AIR06.
3.Check the connection between your Bluetooth device and AIR06.
4.Try to restart AIR06 or your Bluetooth device. According to the Bluetooth standard, the maximum controllable range of Class II speaker is 10 meters. But it varies under different environments and depends on the paired cell phone. A2DP means the Advanced Audio Distribution Profile. It's a Bluetooth profil e th at a llo ws t he w ire les s transmission of stereo audio from an A2DP source to an A2DP receiver. AVRCP m ean s t he A udio/ Vi deo Remote Control Profile. It's a Bluetooth profile that allows Bluetooth devices to control media playback on remote devices. It's typically used with A2DP de vices for n ext/p rev ious t rac k selection and pause/play functions.
Still have questions?
Please feel free to contact our customer service.
UNISTRONG SCIENCE & TECHNOLOGY (USA) INC.
2501 E. Chapman Ave., Suite 100, Fullerton, CA 92831.
Toll Free Number: 1-888-818-0436
Website: www.unistrongusainc.com
Customer Service Hours: Monday – Friday
8:00am PST to 5:00pm PST
Closed on public holiday
12 13
Loading...