Unisteer 8012170-01 User Manual
1964-67 PONTIAC GTO, LEMANS, & TEMPEST POWER RACK
& PINION KIT INSTALLATION MANUAL
# 8012170-01
Full refund will NOT be granted to any kits that are damaged,
scratched, or altered in any fashion.
*USE ONLY POWER STEERING FLUID IN SYSTEM. DO NOT USE ATF.
*ALTHOUGH THIS KIT IS FAIRLY SIMPLE TO INSTALL SOME MODIFICATIONS
ARE NECESSARY TO INSTALL.
*BEFORE STARTING BE AWARE OF THE MODIFICATIONS NEEDED.
*ALSO BE AWARE THAT THERE ARE APPLICATION/PROVISIONS NEEDED IN
ORDER TO INSTALL. PLEASE READ ALL INSTRUCTIONS FIRST.
*DUE TO VARIABLES OUTSIDE OUR CONTROL THESE KITS MAY NOT FIT ALL
APPLICATIONS. ALSO, PLEASE VERIFY THAT KIT WILL FIT YOUR APPLICATION
BEFORE ALTERING VEHICLE.
pg. 1 657070
Kit Contents:
#
Part Number
Description
Quantity
1
8012160-01
Rack and Pinion Unit w/bracket
1
2
8020940
Outer Ends
2
3
8022140
Pump Line Kit 2pc
1
4
8060470
C-5 Pump w/ res (High Flow GM 6)
1
5
271640
Stabilizer Links
2
6
5410330
4.875” DD Shaft (9/16-30 X Notch)
1
7
8052730
U-Joint (¾ Smooth X ¾ DD)
1
8
8050500
U-Joint (¾-36 X 9/16-30)
1
9
120490
3/8”-16 Lock Nut
1
9
200990
3/8x1x101” Flat Washer
4
9
232610
3/8” X 16X 1 ¼” Bolt
2
9
231500
3/8”-16 X 16X 1 ¼” Hex Bolt
1
9
205800
Stand Off Bracket to Frame
1
9
205810
Stand Off Shaft Support
1
10
120410
Jam Nut
2
10
120490
3/8”-16 Lock Nut
2
10
200850
5/16” Flat Washers
4
10
200860
¼” Flat Washers
4
10
231490
3/8-16X 1 ½” Hex Bolt
2
10
231530
7/16-14X 4 ½” Hex Bolt
2
10
231870
5/16”-18 X 5/8” Socket hd Screw
4
10
233660
5/16”-18 X 1” Socket hd Screw
4
10
271640
Stabilizer Link
2
11
620630
Shaft Install Kit
1
12
8021560
16mm Banjo Fitting
1
12
8021570
18mm Banjo Fitting
1
1 4 3 6 10 8 2
2
pg. 2 657070
Disassembly:
1. Disconnect negative battery cable before installation.
2. Raise front of vehicle off ground & center & lock steering wheel.
3. Remove front wheels & remove power-steering lines at pump or gearbox.
4. Drain fluid.
5. From under hood, remove pinch bolt at gearbox & shaft union & separate.
6. Remove cotter pins & nuts at outer tie rod ends.
pg. 3 657070
7. Remove two bolts & nuts at passenger side of vehicle attaching idler arm to frame.
8. Remove center link nut from pitman arm at driver side.
pg. 4 657070
Loading...