Unisteer 8011060-01 User Manual
’58-’64 Impala Rack & Pinion Kit Instructions
8011040-01, 8011050-01, & 8011060-01
Full refund will NOT be granted to any kits that are damaged,
scratched, or altered in any fashion.
*USE ONLY POWER STEERING FLUID IN SYSTEM. DO NOT USE ATF.
*ALTHOUGH THIS KIT IS FAIRLY SIMPLE TO INSTALL, SOME MODIFICATIONS
MAYBE NECESSARY.
*BEFORE STARTING INSTALLATION, PLEASE BE AWARE OF THE
MODIFICATIONS THAT ARE NEEDED TO INSTALL.
*ALSO BE AWARE THAT THERE ARE APPLICATION/PROVISIONS NEEDED IN
ORDER TO INSTALL. PLEASE READ ALL INSTRUCTIONS FIRST.
*DUE TO VARIABLES OUTSIDE OUR CONTROL THESE KITS MAY NOT FIT ALL
APPLICATIONS. ALSO, PLEASE VERIFY KIT WILL FIT YOUR APPLICATION
BEFORE ALTERING VEHICLE.
pg. 1 655910
Kit Contents:
#
Part Number
Description
Quantity
1
8011060-01
RACK & PINION UNIT W/BRACKET
1
2a
8060730
PUMP KIT, SMALL BLOCK CLIP-ON RESERVOIR
1
2b
8060700
PUMP KIT, BIG BLOCK REMOTE RESERVOIR
1 3 8020940
OUTER END, M14 X 1.5
2 4 545090
SHAFT, DD 16.75”
1
5a
8024000
SMALL BLOCK 2 PEACE PUMP LINE KIT
1
5b
8021580
BIB BLOCK 3 PEACE PUMP LINE KIT
1 6 220140
ROLL PIN, 10MM X 40MM
1 7 220150
ROLL PIN, 6MM X 40MM
1 8 8051740
JOINT, .874” SMOOTH X 9/16–30
1 9 8050880
JOINT ¾”–36 X ¾ DD
1
10
8021560
#6AN X 16MM BANJO FITTING
1
11
8021570
#6AN X 18MM BANJO FITTING
1
12
120490
3/8 NYLON INSERT LOCK NUT
4
13
200850
3/8 FLAT WASHER
8
14
231210
3/8–16 X 4½” HEX BOLT
2
15
231510
3/8–16 X 4” HEX BOLT
2
16
8023880
SWAY BAR BUSHING KIT
1
2ab
4
5ab
16
8
15
10
12
13
14
11
9
pg. 2 655910
Disassembly
Pinch
Bolt
Cotter Pin
& Nut
Cotter Pin
& Nut
Idler Arm
Bolts
1. From under the hood remove the pinch bolt at the steering box and shaft. Remove the outer tie rod
cotter pins and nuts. Remove the outer tie rods.
2. Remove the 2 bolts on the passenger side frame rail that retains the idler arm assembly.
pg. 3 655910
Loading...